Bahco Sandflex Hacksaw Blade Manuel utilisateur

The New Sandflex

hacksaw blade cuts faster

than any other.

And lasts longer

(And we can prove it.)

The New Sandflex

bi-metal hacksaw blade

MM-2140-UK-HI 02-05-29 15.58 Sidan 1

Best bite by far

We think you’ll want to make friends with the

New Sandflex hacksaw blade. Not only does it

cut faster than competing blades. It lasts

longer, too.

Proof?

We put our new blade to the test. Laboratory

results showed that it cuts 20% faster than its nearest

competitor.

We didn’t stop there.

In a controlled field test, 50 professional users were asked to

compare the New Sandflex blade with three leading brands.

The majority said they preferred the New Sandflex. They

particularly liked its authoritative bite and smooth cutting

performance: the ”comfort factor.”

How do you make

the world’s best blade?

We introduced Sandflex over 30 years ago as the world’s first

bi-metal hacksaw blade. Since then, we’ve continuously

developed the blade to cut faster and faster.

MM-2140-UK-HI 02-05-29 15.58 Sidan 2

From the outset, we knew this: If you want to

make the fastest blade in the world, you have

to rely on a whole set of interlinked techno-

logies. And not just one single improvement.

So we launched an investigation.

Our technicians examined the teeth of

typical hacksaw blades, which are usually

milled. And found that milled teeth simply

aren’t sharp enough.

Instead, the teeth should be precision-ground to the finest

tolerances.

We went on to examine tooth geometry.

Tests proved that teeth with a positive rake angle are more

aggressive. They bite better. So we decided to use a

steel alloy that makes tooth edges more resistant.

They’ll last longer.

The crowning result is the New Sandflex hacksaw

blade. A bi-metal blade that cuts faster and smoother.

Less strain for professional users.

But why take our word for it?

Give the New Sandflex a try. Discover why it’ll consolidate our

position as the No. 1 global brand.

MM-2140-UK-HI 02-05-29 15.58 Sidan 3

The job gets done faster

We asked 50 professional users to compare the New Sandflex

blade with three other leading brands — two with ground

teeth and the third with milled teeth.

All the blades were repainted to look exactly the same. The

pros then tried them out, always using the same hacksaw to

cut through an ordinary steel pipe with a diameter of 20 mm.

The results were revealing.

The majority of the users preferred the New Sandflex to any

of the others. They explained that Sandflex had the best bite

and was ”easier to use.” Who wants an uncooperative blade that

makes the job tougher?

MM-2140-UK-HI 02-05-29 15.58 Sidan 5

Cuts 20% faster

Our R&D Center in Sweden used standard laboratory methodo-

logies to determine why our new blade is the world’s sharpest.

The four brands that competed in the field test were now subjec-

ted to a specially built test cutting machine with a feed force of

20 kg (200 N).

Its stroke rate of 85 strokes per minute is equivalent to a manual

cutting rate. The workpiece consisted of a ground steel bar

SS2541 (AISI 4377) with a diameter of 20 mm.

The New Sandflex cut 50 sections from the steel bar nearly 20%

faster than its closest competitor. The New Sandflex blade also

had the highest ”MRR” value, that measures the removal of

material from the workpiece in mm3per second.

MM-2140-UK-HI 02-05-29 15.58 Sidan 6

In another laboratory test at the Center, the New Sandflex blade

was shown to have 35% longer life compared its closest

com-petitor. In other words, it withstood 35% more strokes

before wearing down.

In this new century of time-based

competition, professional users want

speed and durability.

Why settle for less?

That’s why they’ll turn to the New

Sandflex bi-metal blade. It cuts faster, with less effort. And lasts

longer, too.

Lasts 35% longer

MM-2140-UK-HI 02-05-29 15.58 Sidan 7

The New Sandflex bi-metal

hacksaw blade

Cuts faster

Lasts longer

MM-2140-UK NOV 2000 newton

MM-2140-UK-HI 02-05-29 15.58 Sidan 8

Table des matières

Autres manuels Bahco Scie

Bahco

Bahco BCL32RS1 Manuel utilisateur

Bahco

Bahco Sandflex Holesaw Sets Manuel utilisateur

Bahco

Bahco Production Cutting Bandsaw Manuel utilisateur

Bahco

Bahco Saw Manuel utilisateur

Bahco

Bahco Multi-Purpose Bandsaw Blades Manuel utilisateur

Bahco

Bahco 3857 Sandflex Manuel utilisateur

Bahco

Bahco Jigsaw Blades Manuel utilisateur

Bahco

Bahco Sandflex Easy-Cut 3819 Manuel utilisateur

Bahco

Bahco PrizeCut Manuel utilisateur

Manuels Scie populaires d'autres marques

RIDGID

RIDGID BS1400 Manuel utilisateur

ATIKA

ATIKA BWS 400-2 Manuel utilisateur

RGC

RGC FS20 Manuel utilisateur

Makita

Makita M2300 Manuel utilisateur

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuel utilisateur

IMET Spa

IMET Spa SIRIO 370 AF-E Manuel utilisateur

Optimum

Optimum OPTisaw CS 275 Manuel utilisateur

Makita

Makita BPB180 Manuel utilisateur

Stihl

Stihl MS 462 C-M Manuel utilisateur

AEG

AEG TS 250 K Manuel utilisateur

Meec tools

Meec tools 004665 Manuel utilisateur

Makita

Makita LS1018L Manuel utilisateur

Ryobi

Ryobi RCS1400 Manuel utilisateur

DeWalt

DeWalt DCS391 Manuel utilisateur

Sealey

Sealey SA72 Manuel utilisateur

skilsaw

skilsaw SPT88 Instructions de montage

Urrea

Urrea SI810 Dimensions et guide d'installation

EINHELL

EINHELL BKG 210/1 Manuel utilisateur