Baby Jogger Glider Board Manuel utilisateur
Glider Board
Glider Board
Instructions
Box Includes:
1 Glider Board
1Push the safety cover away from the tabs.
2a To Raise: Squeeze tabs on right and
left side of Glider Board and pull up.
2b To Lower: Squeeze tabs on right and
left side of Glider Board and push down.
3Pull the safety cover back over the tabs.
WARNING: Always secure seat recline
strap to recline clamp before using
the Glider Board.
To Adjust Glider Board Angle:
NOTE: GLIDER BOARD MUST BE PARALLEL TO THE GROUND BEFORE USE.
Depending on your stroller model, you may need to adjust the angle.
4Press ratchet lock tab
and slide ratchet strap
through opening.
5Push ratchet strap through
until snug. Repeat on
other side.
2Slide ratchet straps between the lower
support bar and the brake rods.
3Place attachment brackets onto lower
support bar.
1Insert wheel axle into the hole on the
underside of the Glider Board. The
wheel is secure when you hear it click.
Repeat on other side.
WARNING: Always ensure the safety covers are covering the adjustment tabs prior to use.
1Press ratchet lock tab and
pull ratchet strap out. Unclip
attachment brackets.
1Pull handle on the rear-underside of
Glider Board.
1Raise Glider Board and unhook storage
straps from underside.
2Hook storage straps around rear crossbar
of stroller frame.
NOTE: When stored, make sure the rear of the Glider Board
is not interfering with the back of the stroller seat. Adjust
Glider Board length for storage if necessary.
NOTE: The stroller may be folded with the Glider Board in
the storage position. The Glider Board wheels must be
removed prior to folding the stroller.
WARNING: Always make sure
storage straps are fastened
to the underside of the Glider
Board before use.
WARNING: Always make sure the ratchet straps are securely tightened before use.
WARNING: Total weight load recommended for Glider Board is 45 lbs.
To Remove Glider Board:
To Adjust Glider Board Length:
Storage:
8575 Magellan Parkway, Suite 1000 • Richmond, VA 23227 • T: 800-241-1848 • F: 804-262-6277 • www.babyjogger.com
The sample product shown in this manual may differ slightly from your production quality Glider Board.
However, this will not affect the assembly or functionality of your Baby Jogger product.
Glider Board
Instructions (continued)
Pull out to extend. Push in to shorten.
1Press wheel release
button and gently pull
on wheel to remove.
To Remove Wheels:
Table des matières
Autres manuels Baby Jogger Accessoires
Baby Jogger
Baby Jogger Maxi Cosi Car seat adapter Manuel utilisateur
Baby Jogger
Baby Jogger Patio Furniture Manuel utilisateur
Baby Jogger
Baby Jogger City Select Bassinet Kit Manuel utilisateur
Baby Jogger
Baby Jogger CITY MINI 2 Manuel utilisateur
Baby Jogger
Baby Jogger City Select Second Seat Kit Manuel utilisateur
Baby Jogger
Baby Jogger CAR SEAT ADAPTER Manuel utilisateur
Baby Jogger
Baby Jogger City tour 2 Manuel utilisateur
Baby Jogger
Baby Jogger CITY SELECT Manuel utilisateur
Baby Jogger
Baby Jogger PD349779C Manuel utilisateur
Baby Jogger
Baby Jogger CITY SELECT 2 Manuel utilisateur
