Böning AHD 1219 Series Manuel utilisateur

AHD 12XX / AHD 11XX

PC Panels / Displays

Installation Instructions

Addendum to Operation Manual for Panel PCs/Displays 12XX/11XX

Please also read the corresponding operation manual before beginning any work!

Dok-ID: PaB-1139 V6 ART.-Nr. 4575 EN

2 V6

Automationstechnologie GmbH & Co. KG

Am Steenöver 4

D-27777 Ganderkesee

Tel.: +49 (0) 4221 9475-0

Fax: +49 (0) 4221 9475-21 /-22

E-Mail: [email protected]

Internet: www.boening.com

AHD 12XX / AHD 11XX PC Panels / Displays

V6 3

1General Information...............................................................5

1.1 About these Installation Instructions..............................5

1.2 Explanation of Symbols .................................................5

1.3 Limitation of Liability ......................................................6

2Safety ......................................................................................7

2.1 Operator’s Responsibilities ............................................7

2.2 Personnel Requirements...............................................7

2.2.1 Qualifications..................................................7

3Introduction ............................................................................9

3.1 Required Tools.............................................................10

3.1.1 Hardware AHD 1219 X / AHD 1119 X..........10

3.1.2 Hardware AHD 1215 X / AHD 1115 X..........10

3.2 Installation Location.....................................................11

3.2.1 Installation Angle..........................................11

3.3 Preparation ..................................................................11

3.4 Viewing Angle AHD 1219 X / AHD 1119 X..................12

3.5 Viewing Angle AHD 1215 X / AHD 1115 X..................13

3.6 Console Installation .....................................................14

3.6.1.1 AHD 12XX.....................................14

3.6.1.2 AHD 11XX.....................................15

4Panel Cutouts and Drill Holes.............................................16

4.1 Panel Cutout and Drill Holes AHD 1219 X / AHD

1119 X..........................................................................16

4.2 Panel Cutout and Drill Hole AHD 1215 X / AHD 1115

X...................................................................................17

5Installing the Panel PCs / Displays ....................................18

5.1 Marking the Panel Cutouts and Drill Holes..................18

5.2 Outdoor Installation......................................................20

5.3 Installing the Device.....................................................21

5.4 Securing the Fixture Nuts ............................................23

5.5 Tightening Pattern .......................................................24

5.6 Earthing........................................................................25

6Index......................................................................................26

AHD 12XX / AHD 11XX PC Panels / Displays

General Information

4 V6

Change History

for Installation Instructions AHD 12XX / AHD 11XX

Date

Version

Reason for

Change

Page

Author

02/13/2012

AHD_12XX_11XX_Montageanleitung_EN_V1_20120213

Creation of installation

instructions

n.a.

Pasuki,

Bahram

(PaB)

Jul 5th,

2012

AHD_12XX_11XX_Montageanleitung_EN_V2_20120705

New panel cutout

templates for 15“ and

19“

16-19

Pasuki,

Bahram

(PaB)

Jul 22nd,

2013

AHD_12XX_11XX_Montageanleitung_EN_V3_20130722

Advice for additional

gasket added

Pasuki,

Bahram

(PaB)

Aug 29th,

2013

AHD_12XX_11XX_Montageanleitung_EN_V4_20130829

Viewing Angles for

AHD 1219x / AHD

1119 X changed.

Pasuki,

Bahram

(PaB)

Nov 6th,

2013

AHD_12XX_11XX_Montageanleitung_EN_V5_20131106

Installation pictures

adapted

Installation depth

defined

14,

Pasuki,

Bahram

(PaB)

March

13th, 2014

AHD_12XX_11XX_Installation_Guide_EN_V6_20140313

Name of English doc-

ument changed.

Earthing advice add-

ed.

Pasuki,

Bahram

(PaB)

AHD 12XX / AHD 11XX PC Panels / Displays

General Information

V6 5

1 General Information

1.1 About these Installation Instructions

Read these installation instructions carefully before beginning

any work! It is a part of the Operation Manual for panel PCs /

displays of the AHD 12XX G / AHD 11XX G / AHD 12XX F/ AHD

11XX F series, and it is only valid for use with the operation

manuals with the above listed devices.

When handing the product over to third parties, these installa-

tion instructions must be included.

These installation instructions are a part of the corresponding

operation manual. They contain important information about the

proper installation procedures for Panel PCs / Displays AHD 12XX

G / AHD 11XX G / AHD 12XX / AHD 11XX F.

Adhering to all product safety and handling instructions for the

product and all connected components is a prerequisite for safe

operation.

In addition, the local accident prevention and general safety rules

for the device’s area of operation must be observed.

The illustrations in this manual are intended to demonstrate the

contents more clearly. They are not necessarily drawn to scale and

can vary from the actual product in minor details.

1.2 Explanation of Symbols

Warnings

In this manual, warnings are marked by symbols. The warnings are

introduced by signal words indicating the degree of danger.

It is important to heed these warnings and act with caution to

avoid accidents, personal injury and property damage!

DANGER!

… indicates an imminently hazardous situation that

can result in death or severe injury, if not

avoided.

WARNING!

… indicates a potentially hazardous situation which

can result in death or severe injury, if not

avoided.

AHD 12XX / AHD 11XX PC Panels / Displays

General Information

6 V6

CAUTION!

… indicates a potentially hazardous situation that

can result in minor or light injury, if not avoided.

CAUTION!

… indicates a potentially hazardous situation that

can result in property damage, if not avoided.

Tips and Recommendations

TIP!

… indicates useful tips and recommendations and

information for efficient and error-free operation.

1.3 Limitation of Liability

All information and instructions in this manual have been compiled

in consideration of current norms and regulations, the state of

technology, and our knowledge and experience of many years.

The manufacturer is not responsible for damages due to:

Noncompliance with the instructions in this manual

Unintended use

Employment of untrained personnel

Unauthorized modifications

Technical modifications

Use of unauthorized spare parts

The actual scope of delivery can vary from the explanations and il-

lustrations in this manual in case of customized models, special

ordering options, or the latest technical improvements.

In addition, the agreed upon obligations in the delivery contract, the

general terms and conditions, the manufacturer’s delivery terms

and the legal regulations current at the contract signing are in

force.

We reserve the right to make changes to improve the device’s ser-

vice properties and to further develop the product.

All regulations regarding the corresponding devices’ operation ma-

nuals also apply, without limitation, to these installation instruc-

tions.

AHD 12XX / AHD 11XX PC Panels / Displays

Safety

V6 7

2 Safety

This chapter provides an overview of all important safety aspects

for optimal protection of the personnel as well as safe and error-

free operation.

Noncompliance with the handling and safety instructions listed in

this manual can cause significant hazards.

2.1 Operator’s Responsibilities

This product is intended for commercial use. Therefore, its opera-

tion is subject legal workplace safety regulations.

In addition to the workplace safety instructions in this manual, the

current safety, accident prevention, and environmental protection

regulations for the product’s place of use must be observed. Espe-

cially:

The operator must stay abreast of the current workplace safety

regulations and determine through a risk assessment any addi-

tional hazards resulting from the special working conditions of

the product’s place of use. He must implement these in the form

of operating instructions for the product’s use.

During the product’s entire period of operation, the operator

must verify that his operating instructions are in compliance with

current regulations and revise them, if necessary.

The operator must clearly regulate and define areas of respon-

sibility for installation, operation, maintenance and cleaning.

The operator must ensure that all employees handling the

product have read and understood these installation instruc-

tions.

In addition, he must train the personnel in regular intervals and

inform them about any dangers.

Furthermore, the operator is responsible for always keeping the

product in perfect working condition.

2.2 Personnel Requirements

2.2.1 Qualifications

WARNING!

Risk of injury from insufficient qualifications!

Improper handling can lead to significant personal

injury and property damage.

Therefore:

- Only allow qualified personnel to do any work.

AHD 12XX / AHD 11XX PC Panels / Displays

Safety

8 V6

This manual lists the following qualifications for various areas of

activity.

Trained Person

has been trained by the operator through an orientation for the

assigned tasks and has been informed about possible hazards

from improper execution.

Specialist

is able to execute the assigned tasks and recognize and avoid

potential hazards independently due to formal training, know-

ledge and experience, as well as knowledge of the situational

norms and regulations.

Electrician

is able to work on electrical systems and recognize and avoid

potential hazards independently due to formal training, know-

ledge and experience, as well as knowledge of the situational

norms and regulations.

The electrician is trained for the specific work site in which he is

active and knows the relevant norms and regulations.

Only those persons who can be expected to do their work reliably

are permitted as personnel. Persons, whose responsiveness is di-

minished by e.g. drugs, alcohol, or medication, are not permitted.

Observe the local age and profession specific regulations

when selecting the personnel.

AHD 12XX / AHD 11XX PC Panels / Displays

Introduction

V6 9

3 Introduction

Special care must be taken when installing the Panel PCs / Dis-

plays ADH 12XX / AHD 11XX to avoid damaging these devices.

Prior to installation, panel cutouts must be sawed, and holes must

be drilled for the bolts. The corresponding dimension drawings can

be found in Chapter 4 of this document.

It is imperative to observe the devices’ installation depths. More

detailed instructions for installation locations, installation depths,

and installation angles can be found in the corresponding operation

manual, available from the manufacturer (if it is not present).

TIP!

These installation instructions outline and further ex-

plain the installation of a 19 inch panel PC / display.

However, all steps are also fully valid for installing 15

inch displays.

The mounting frame, included in the delivery, ensures an equal

distribution of force when tightening the fixture nuts. Therefore, do

not install these devices without the mounting frame.

CAUTION!

If the fixture nuts are tightened without using the

mounting frame, the devices may be irreparably

damaged!

Furthermore, the mounting frame serves as a template for marking

the cutout and the drill holes for the mounting bolts.

AHD 12XX / AHD 11XX PC Panels / Displays

Introduction

10 V6

3.1 Required Tools

The following tools are required for installing the panel PCs / dis-

plays:

- jigsaw (saw blade for corresponding panel material, e.g.

wood or metal)

- drill, 5 mm bit (bit according to panel material)

- spirit level (for ensuring levelness of the installation location)

- torque wrench (for torque 3 Nm)

- file, if needed

- counter bore, if needed

3.1.1 Hardware AHD 1219 X / AHD 1119 X

The following hardware pieces (included in the delivery) are re-

quired for installing panel PCs / displays:

- mounting frame (454 x 384 mm; 10 drill holes), used as a tem-

plate for panel cutout and drill holes

- 10 x spring washer M4

- 10 x washer M4

- 10 x hexagonal nut M4

3.1.2 Hardware AHD 1215 X / AHD 1115 X

The following hardware pieces (included in the delivery) are re-

quired for installing panel PCs / displays:

- mounting frame (384 x 324 mm; 8 drill holes), used as tem-

plate for panel cutout and drill holes

- 8 x spring washer M4

- 8 x washer M4

- 8 x hexagonal nut M4

Ce manuel convient aux modèles suivants

Table des matières

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation