Axis 233D Manuel utilisateur

ENGLISH FRANCAIS DEUTSCH ESPAÑOL

ITALIANO

AXIS 233D

Network Dome Camera

Installation Guide

AXIS 233D Installation Guide Page 3

ENGLISH

AXIS 233D

Installation Guide

This installation guide provides instructions for installing the AXIS 233D Network Dome

Camera on your network. For all other aspects of using the product, please see the User’s

Manual, available on the CD included in this package, or from www.axis.com/techsup

Installation steps

1. Check the package contents against the list

below.

2. Install the hardware. See page 4.

3. Assign an IP address. See page 10.

4. Set the password. See page 13.

Package contents

Before you begin:

If the AXIS 233D is to be mounted in a position where it is difficult to access, it is

recommended that you set the IP address and get the camera up and running before

completing the hardware installation.

Dimensions

HxWxD = 209x170x170 mm (8.23”x6.69”x6.69”)

Weight = 2.5kg (5.5lbs) excluding power supply

Item Models/variants/notes

Network dome camera AXIS 233D

Indoor Power Supply with

power cable

Europe

Australia

USA/Japan

Korea

Terminal block connectors 3 (8-pin) connector blocks for connecting external devices to the I/O terminal

connectors

Mounting kit Hard Ceiling Mount for Indoor Use

Drop Ceiling Mount for Indoor Use

CD AXIS Network Video Product CD, including product documentation, installa-

tion tools and other software

Printed Materials AXIS 233D Installation Guide (this document)

Axis Warranty Document

Important!

This product must be used in

compliance with local laws

and regulations.

Page 4 AXIS 233D Installation Guide

Install the Hardware

Place dome bubble on camera

1. Place dome bubble on the camera

unit.

2. Place O-ring and black ring with

coordinates over dome. Turn black

ring till it comes into the slots.

3. Different screws are used for

fastening the black ring depending

on which ceiling mount is being

installed:

• Hard Ceiling Mount:

3 recessed screws

• Drop Ceiling Mount:

3 M3x10 screws.

4. Tighten screws to hold ring and

dome securely, do not tighten screws

completely. Follow instructions for

your chosen camera mounting.

Note:

Do not use the camera's dome bubble

if it is to be installed in a protective

housing as the use of two dome bub-

bles will reduce image quality and

cause image blurring.

Dome

bubble

O-ring

Black

ring

Camera

unit

The camera’s serial number (S/N) is on

this label. You will need this number to

with this product. Put it in a safe place

for future reference.

set the camera’s IP address.

There is an additional label included

Top view

Restart

Control

Status

button

(black)

button

(red)

LED

AXIS 233D Installation Guide Page 5

ENGLISH

Hard Ceiling Mount - package contents

Hard Ceiling Mount

1 Hard ceiling bracket

1 Decoration ring

4 plugs

4 ST4.2 screws

2 M3x10 screws

4 M4x10 screws

3 Recessed screws

Attach bracket to ceiling using

4 ST4.2 screws and plugs.

Insert 2 M4 screws in

each side of base

Attach safety wire to bracket and

base of dome using M4 screw & nut

Page 6 AXIS 233D Installation Guide

Follow these instructions to mount the dome camera:

1. Secure the bracket to the ceiling with four ST4.2 screws and plugs. (Fig. A)

2. Attach one end of the safety wire to the bracket and the other end to the AXIS 233D

using an M4 screw and nut. (Fig. B)

3. Insert four M4 screws (2 screws on each side) partially into the camera base.(Fig. C)

4. Insert the AXIS 233D into the bracket and tighten the captive screw allowing you to

free your hands to tighten the four screws in the screw slots (two on each side) on the

AXIS 233D.(Fig. D)

5. Connect the network cable.

6. Connect the power cable to the

connection block (see Power

connections, on page 9)

7. Slide the decoration ring on to the

AXIS 233D and lock into place by

tightening two M3 screws into the

bracket. Take care to place the side

with the open slot over the

connection blocks for cables.(Fig. E)

8. The hardware installation is now

complete, proceed to Assign an IP

address, on page 10 to install the

AXIS 233D on your network.

Insert network camera

into ceiling bracket

Slide on decoration ring

Captive screw

Slot for cables

AXIS 233D Installation Guide Page 7

ENGLISH

Drop Ceiling Mount - package contents

Drop Ceiling Mount

1 Inner bracket

1 Outer bracket 1 Decoration ring

5 M3x10 screws

4 M3x60 screws

Attach ceiling mount brackets

with 4 long M3 screws.

Attach safety wire

Inner mounting ring

Outer mounting ring

with an M4 screw & nut

M3 screws

(long)

Page 8 AXIS 233D Installation Guide

Referring to the image for Drop Ceiling Mount, follow these instructions to mount the dome

camera:

1. Locate the position in the ceiling for a 190mm hole to be cut. A template is included

to aid in marking the mounting hole.

2. Cut the hole in the ceiling according to the markings.

3. Insert the inner mounting ring in the ceiling with the screw guides pointing

down.(Fig. A)

4. With four long M3 screws, attach inner mounting ring to the outer mounting ring.

5. Attach the safety wire to something structurally strong in the ceiling and to the base

of the camera using an M4 screw and nut.(Fig. B)

6. Through the hole in the ceiling connect the Ethernet cable and the power cable to

the connection block (see Power connections, on page 9).

7. Push the dome body up into the installed bracket taking care to align the screw holes

in body (see step 3, on page 4) with the mounting bracket’s screw slots. Tighten

screws to lock camera into the bracket.

8. Slip the decoration ring over the dome aligning screw holes with screw slots in

bracket. Use 2 M3 screws to fasten the decoration ring.(Fig. C)

9. The hardware installation is now complete, proceed to Assign an IP address, on page

10 to install the AXIS 233D on your network.

Attach decorative ring

with 2 M3 screws

AXIS 233D Installation Guide Page 9

ENGLISH

Power connections

Power can be supplied to the camera by the following methods:

• Connect the supplied indoor power adapter to the power connector block and

attach it to the camera casing. Note that this indoor power adapter provides

power for the camera only.

• Connect an outdoor power supply to the power connector block and attach it to

the camera casing. For information on available outdoor power supplies, please

visit the Support pages at http://www.axis.com/techsup/

The power connector block supports both AC and DC input power.

!IMPORTANT! - When using a DC power supply (included with this product), it is

very important that it is connected correctly to the power block. Make sure the

wire labeled with “+” is connected to pin 2 and the remaining wire GND to pin 3.

With an AC power supply either wire can be connected to pin 1 or 2.

Page 10 AXIS 233D Installation Guide

Assign an IP address

Most networks today have a DHCP server that automatically assigns IP addresses to

connected devices. If your network does not have a DHCP server the AXIS 233D will use

192.168.0.90 as the default IP address.

If you would like to assign a static IP address the recommended method in Windows is either

AXIS IP Utility or AXIS Camera Management. Depending on the number of cameras you

wish to install, use the method that best suits your purpose.

Both of these free applications are available on the Axis Network Video Product CD supplied

with this product, or they can be downloaded from www.axis.com/techsup

Notes:

• If assigning the IP address fails, check that there is no firewall blocking the operation.

• For other methods of assigning or discovering the IP address of the AXIS 233D, e.g. in other operating

systems, see page 15.

Method Recommended for Operating system

AXIS IP Utility

See page 11

Single camera

Small installations

Windows

AXIS Camera Management

See page 12

Multiple cameras

Large installations

Installation on a different subnet

Windows 2000

Windows XP Pro

Windows 2003 Server

Autres manuels pour 233D

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Axis Caméra de sécurité

Axis

Axis NETZWERK-KAMERA 2110 Manuel utilisateur

Axis

Axis Q3819-PVE Manuel utilisateur

Axis

Axis 211M Manuel utilisateur

Axis

Axis M3203 Manuel utilisateur

Axis

Axis AXIS 214 PTZ Manuel utilisateur

Axis

Axis M1114 Manuel utilisateur

Axis

Axis W101 Manuel utilisateur

Axis

Axis M1033-W Manuel utilisateur

Axis

Axis AXIS M1054 Manuel utilisateur

Axis

Axis Q35-VE Series Manuel utilisateur

Axis

Axis Q86 Series Manuel utilisateur

Axis

Axis Q1765-LE PT Manuel utilisateur

Axis

Axis Q8685-E Manuel utilisateur

Axis

Axis Q3527-LVE Manuel utilisateur

Axis

Axis M5000 Manuel utilisateur

Axis

Axis P3343 Manuel utilisateur

Axis

Axis 01050-001 Manuel utilisateur

Axis

Axis P5532-E PTZ Manuel utilisateur

Axis

Axis P1311 Manuel utilisateur

Axis

Axis Fixed Dome Network Camera AXIS P3301 Manuel utilisateur

Axis

Axis M1145 Manuel utilisateur

Axis

Axis P1214 Manuel utilisateur

Axis

Axis Q36 Series Manuel utilisateur

Axis

Axis Q6000-E Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur

Lumens

Lumens VC-A50PNW Manuel utilisateur