Axis Camera Station Guide de configuration rapide
1
Please note that AXIS does not take any responsibility for how this configuration
may affect your system. If the modification fails or if you get other unexpected
results, you may have to restore the factory default settings as described in the
User’s manual.
HOW TO
Integration Guide AXIS Camera
Station and AXIS A8004-VE
Created: May 11, 2015
Last updated: May 11, 2015
HOW TO –Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS A8004-VE
Rev: 1.1, Last updated: 13/05/2015 2
Rev: 1.1
Introduction
The following document highlights how to add a door station to Axis Camera
Station and then complete further configurations that can be made to meet an
operator’s need:
The document explains how to:
Add a door station to Axis Camera Station.
Play an audible alert on the client PC when a call from the door station
is being made.
Create an alarm alert associated with the call (creates alarm log and
pop up).
To bring the door station video to the front view.
This following configuration has been tested with the following products and
firmware:
AXIS A8004-VE, firmware 5.65.1 and Axis Camera Station 4.2.
Step 1 –Adding a door station
Add the door station as you would a camera:
1) “Configuration”/ “Add/Edit Cameras”/ “Add”
2) Select the door station when it is found by the search to add the device to the system. Once
the door station is added give it a name the operator can relate to.
The door station should be available in the live view. When you put the mouse on the screen you will
get an “Open Door”button appear.
If you press the button on the door station the incoming call buttons will appear. You can then answer
or decline the call.
HOW TO –Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS A8004-VE
Rev: 1.1, Last updated: 13/05/2015 3
Step 2 –Configure an audible alert on the client PC
To configure an alarm sound to alert the operator that there is an incoming call.
1) Select the configuration tab (top right corner)
2) Select Options/Customize
3) Select Notifications and select “Beep” or “Sound file”. Useful alarm .wavs can be
found on the internet.
Note: Use this when configuring any alarm on Axis Camera Station to trigger and audible
alert on the operators PC and not just an event in the alarm box.
The next step is to create an event trigger from the door station to trigger the audible alert.
HOW TO –Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS A8004-VE
Rev: 1.1, Last updated: 13/05/2015 4
Step 3 –Create a trigger associated to the call
Configure an event trigger associated to the call:
1) Select “Configuration”/ “Event Configuration”/ (you will see the default record and
door open rules created by the door station and any others already configured in the
system). Select “New” and then select “Add”.
2) In the add trigger window select “Device Event”. Select the “A8004-VE in the device
list (This will be the name given to the device). In the Event pull down, select “State”
in the Call selection. Then in the filter selection select “Calling”. Press Next.
HOW TO –Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS A8004-VE
Rev: 1.1, Last updated: 13/05/2015 5
Step 4 –Create actions associated to the trigger
You can now create actions associated with the trigger. The following describes how the call
will trigger the audible alert and log it with the alarm list.
1) Add the action “Raise Alarm” – Give it a description like “Call from Main Entrance”.
You can also put a description or extra text such as “Check ID”.
2) You can also add a procedure (tick the box and upload txt file.). This can contain
additional information such as who to contact if there is an issue.
An optional action would be to bring the video of the door station to the front. This is optional
as this could interrupt the operators viewing of a live security event, so should be discussed
when configuring.
3) Add another action “Live View”, select the door station in the View and tick the bring
application to the front. Press “Next”.
4) Configure Schedule if needed.
5) Name the Rule “Door Station Actions” or similar and press finish.
When the push button is pressed, the following should occur:
An audible alert will play on the operator PC.
A door alert will be in the alarm log.
The door station video will come to the front view.
HOW TO –Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS A8004-VE
Rev: 1.1, Last updated: 13/05/2015 6
Step 5 –Record the audio and video from the door station
You can record the audio from the door station as well as the video. Note that only the audio
from the door station will be recorded, the audio from the Axis Camera Station client will not
be recorded.
Before enabling please check that you are adhering to local codes of practice.
1) Select the “Video & Audio” configuration setting and select (double click or edit) the
door entry station.
2) Select the “Live view and recording” button if you wish to record the audio from the
door station.
Autres manuels pour Camera Station
7
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Axis Caméra IP
Axis
Axis Q1635 Manuel utilisateur
Axis
Axis Q3505-V Manuel utilisateur
Axis
Axis M3007-PV Manuel utilisateur
Axis
Axis AXIS P1353-E Manuel utilisateur
Axis
Axis AXIS P3304 Manuel utilisateur
Axis
Axis Q1932-E Manuel utilisateur
Axis
Axis P1428-E Manuel utilisateur
Axis
Axis Network Camera AXIS 221 Manuel utilisateur
Axis
Axis FHD410 Manuel utilisateur
Axis
Axis P5512 Manuel utilisateur
Axis
Axis P5534 Outdoor T95A00 Kit Manuel utilisateur
Axis
Axis M1103 Manuel utilisateur
Axis
Axis M1114 Manuel utilisateur
Axis
Axis AXIS 206 Manuel utilisateur
Axis
Axis P3346-V Manuel utilisateur
Axis
Axis XP40-Q1942 Manuel utilisateur
Axis
Axis DROP CEILING P5522-E Manuel utilisateur
Axis
Axis M1104 Manuel utilisateur
Axis
Axis P5534-E Manuel utilisateur
Axis
Axis AXIS P3224-LVE Mk II Manuel utilisateur
