AXEM Technology S-8800 Manuel utilisateur
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
1/27
S-8800, M-2900
User guide
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
2/27
Table des matières
1Historique .......................................................................................Erreur ! Signet non défini.
2S-8600 view.............................................................................................................................5
1-1: Front View............................................................................................................................5
1-2: Back View ............................................................................................................................5
1-3: Side View .............................................................................................................................5
3Reader Configurations .............................................................................................................6
3.1 Initial Use..........................................................................................................................6
3.1.1 Step 1: Powering the Reader .....................................................................................6
3.1.2 Step 2: Connecting Antenna(s) to Reader.................................................................. 6
3.1.3 Step 3: Connecting Data Line to Reader....................................................................7
3.1.4 Step 4: Operating Reader via Demo ..........................................................................8
3.2 Setting RF Parameter ..................................................................................................... 10
3.2.1 Setting RF Output Power ......................................................................................... 10
3.2.2 Setting RF Spectrum ............................................................................................... 11
3.2.3 Antenna Connection Detector .................................................................................. 11
3.2.4Measure RF Port Return Loss ................................................................................. 12
3.3 ISO-18000-6C tag inventory ........................................................................................... 12
3.3.1 Real Time Mode & Buffer Mode............................................................................... 12
3.3.2 Fast Switching Antenna to Inventory Tags ............................................................... 15
3.4 Accessing ISO-18000-6C Tag ........................................................................................ 16
3.4.1 Read tags ................................................................................................................ 16
3.4.2 Write Tags ...............................................................................................................17
3.4.3 Lock Tags ................................................................................................................ 17
3.4.4 Kill Tags...................................................................................................................18
3.4.5 Tag Selection........................................................................................................... 18
3.4.6 Error Display Might Be Returned ............................................................................. 19
3.5 Accessing & Inventorying ISO-18000-6B Tag ................................................................. 20
3.5.1 ISO-18000-6B Tag Inventory ................................................................................... 20
3.5.2 Accessing to ISO-18000-6B Tag.............................................................................. 21
3.6Other Settings.................................................................................................................22
3.6.1 Set DRM Status....................................................................................................... 22
3.6.2 Operating Temperature Monitoring .......................................................................... 23
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
3/27
3.6.3 Set GPIO Level........................................................................................................ 23
3.6.4 Setting Buzzer Status .............................................................................................. 25
3.6.5 Charging The Serial Communication Baud Rate...................................................... 26
4Develop your own RFID Application....................................................................................... 27
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
4/27
1Background
Description
Date
Version
Author
Auditor
First parution
17/05/2019
V1.0
CLO
YDA, ACA
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
5/27
2S-8600 view
1-1: Front View
1-2: Back View
1-3: Side View
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
6/27
3Reader Configurations
3.1 Initial Use
3.1.1 Step 1: Powering the Reader
Plug the power cable in, with the indicator light on and sound of a short beep, reader is ready. As
illustrated below:
3.1.2 Step 2: Connecting Antenna(s) to Reader
Connect the antenna(s) with the antenna port as illustrated below:
Access up to 4 antennas, as illustrated below:
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
7/27
3.1.3
Step 3: Connecting Data Line to Reader
Method NO.1: You can connect the reader to your PC via RS-232 serial port, as illustrated below:
Next, please switch the DIP to the position as illustrated below:
Method NO.2: You can also connect the reader to your PC via TCP/IP, as illustrated below:
Next, please switch the DIP to the position as illustrated below:
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
8/27
DIP Switch：
①：EN, ON Status, EN is low level.
②：GPIO1, ON Status, GPIO1 is low level.
③④：TCP/IP, ON Status is TCP/IP communication.
⑤⑥：Blank.
⑦⑧：RS232, ON Status is RS232 communication.
3.1.4
Step 4: Operating Reader via Demo
Put the UHFDemo.exe, reader.dll, customControl.dll into the same folder, and double-click
UHFDemo.exe to run the software.
1. Open the software and it will shows as below:
2. Please select RS232 as Connection if the reader is connected via RS -232 port. Choose the
corresponding Serial Port and Baudrate(default baudrate is 115200). As illustrated below:
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
9/27
3. Click Connect, if it succeeds, the Operation History will display as below:
If the reader is connected via TCP/IP, please follow those steps:
•Ensure that an Ethernet Card has been installed in the PC.
•Ensure that PC and reader in the same network segment.
1. Default settings when connected via TCP/IP as follows:
•IP addresses: 192.168.0.178
•Net mask: 255.255.255.0
•Port No.: 4001
For more TCP / IP configuration details, please defer to the document supplied:\ tcpip configuration
\ IPORT-1UM.PDF
2. Click Connect, if it is connected successfully, the Operation history will display as below:
AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
10/27
Text communication with the reader:
Click on Get in Firmware Version or in Reader Identifier, the following screen displays:
Now the reader has been connected to PC successfully.
3.2 Setting RF Parameter
After connecting the reader with PC, we need to set some basic RF parameters: RF Output Power
& RF Spectrum. Please select RF Setup as illustrated below:
3.2.1
Setting RF Output Power
RF Output Power is the strength of RF output signal from antenna port whose unit is dBm.
The output power range is 0 - 33dBm. When this setting completes, it will be saved in the reader
automatically even if the power is cut off. Our default output power is 30dBm (1W).
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels AXEM Technology Système RFID
AXEM Technology
AXEM Technology S-8600 Manuel utilisateur
AXEM Technology
AXEM Technology UniSled Manuel utilisateur
AXEM Technology
AXEM Technology AX'Up wire Manuel utilisateur
AXEM Technology
AXEM Technology Atid AT188N Manuel utilisateur
AXEM Technology
AXEM Technology D-10 Series Manuel utilisateur
AXEM Technology
AXEM Technology Atid AT188N Manuel utilisateur
AXEM Technology
AXEM Technology Eagle Manuel utilisateur
