AVS RM70CQUAD / RM90CQUAD
The AVS RM70CQUAD/RM90CQUAD can display up to 4 cameras in a split screen, either any channel full screen, 2/3/4-way split.
The channels can be switched manually using the buttons on the front panel or by remote or can be controlled by each channel’s input wire
e.g. connect the blue wire to the left turn indicator trigger wire and mount camera 3 on the left side of the vehicle. When the left indicator
turns on the monitor will display the left side camera. Do not connect any input control wire to permanent power as this will lock the
display to that channel and may damage the monitor.
Appropriately fused +12/24v switched ignition on supply
Good earth source e.g. vehicle body/chassis
Switches display to CH2 REVERSE
Reverse signal/vehicle reverse light wire (+12/24v)
Switches display to CH1/FORWARD
Forward camera switch (+12/24v)
Switches display to CH3/LEFT
Left turn indicator or switch (+12/24v)
Switches display to CH4/RIGHT
Right turn indicator or switch (+12/24v)
CH2 (REV) 4 pin
connector
CH2 camera input & power 12v out
4 pin camera cable. Monitor will switch to display this input when a
signal is detected on GREEN wire.
CH1 (FWD) 4 pin
connector
CH1 camera input & power 12v out
4 pin camera cable. Monitor will switch to display this input when a
signal is detected on BROWN wire.
CH3 camera input & power 12v out
4 pin camera cable. Monitor will switch to display this input when a
signal is detected on BLUE wire.
CH4 camera input & power 12v out
4 pin camera cable. Monitor will switch to display this input when a
signal is detected on GREY wire.
Switch between – full screen – dual screen – 3 way split even – 3 way split left – 3 way split right – 4 way
split left & right – 4 way split ¼screen
MENU (RM70CQUAD access
through remote only)
MENU –push to enter menu and scroll through functions. See options below
Manually switch to CH1 camera or adjust left
Manually switch to CH2 camera or adjust right
Manually switch to CH3 camera or adjust down
Manually switch to CH4 camera or adjust up
Adjust brightness/contrast/colour/tint/reset
Camera 1 – 4 mirror option – ON>/OFF<
Language/RU (rotation) rotates monitor display for upside down mounting (RM70CQUAD only)
Cam 1-4 delay (default 3 sec, adjustable 0-10 sec). Adjusts time display holds on channel after signal
removed from green, brown, blue or black wire.
