AVProConnect AC-SW62-UHD Manuel utilisateur
AC-SW62-UHD
AVProConnect
3518 N Casco Avenue ~ Sioux Falls, SD 57104
1-877-886-5112 ~ 605-274-6055
support@avproconnect.com
AC-SW62-UHD
6x2 Classroom/Conference Room Multi-
format Matrix w/ HDBaseT Input and Output
1
Introduction
AVProConnect’s AC-SW62-UHD (aka EasyStreet) is a robust multi-format matrix switch
designed for small offices, classrooms and conference rooms. This 6x2 matrix is
designed to be an ALL-IN-ONE solution for the active office allowing for multiple input
types, including HDMI (x3), VGA, DisplayPort. In addition to the local inputs, it has a
HDBaseT input that is compatible with the AC-EX100WPP-UHD so you can use a Wall
Plate Transmitter from anywhere in the room, or a separate room all together!
AC-SW62-UHD
Key benefits of using AC-SW62-UHD:
1) ULTRA HIGH DEFINITION: This unit supports 4K resolutions for today's
modern office. As displays get larger and PC's output more 4K content, 4K is ever
more necessary in this environment. Utilizing high resolution allows the user to
share higher quality marketing and draft images and makes presentations sharper
and view-able for larger audiences.
2) DISTANCE: By using AC-EX100WPP-UHD-T, the transmission distance for HD
1080P is 100 meters (330ft) & 4K is up to 70 meters (230ft) into the matrix! You
can additionally go 70M (230ft) on 1080P, 40M (131ft) on 4K from the HDBaseT
output to a display.
3) AUTO SENSING: This matrix is designed to be a "Set it & forget it" piece of
hardware. When the user plugs in their device (BYOD), the matrix automatically
senses the signal and makes it active. If more than one inputs are in use, there is
a simple button on the front to toggle inputs for each output.
4) CONTROL: Simple front panel control, IR and RS232 control is available.
5) POWER: The EasyStreet is capable of powering both the HDBaseT input
device or transmitter (AC-EX100WPP-UHD or AC-EX100-UHD-T) as well as the
HDBaseT receiver (AC-EX70-UHD-R). This eliminates unnecessary power supplies
and cleans up the installation dramatically.
6) MULTI-FORMAT: The Multi-format design allows you to leave this "in-room"
matrix comfortable without having to supply a plethora of adapters. You have
input options for VGA, DisplayPort, and 3x HDMI. In addition if you use the AC-
EX100-WPP Transmitter, you have another HDMI and VGA input.
2
Applications:
•The efficient user interface makes it an ideal "leave in room" device for
conference rooms that the end user can control simply.
•Conference/huddle room configurations where many sources types can be used,
DisplayPort, HDMI and VGA
•HDBaseT In and Out for large auditorium type scenarios.
•Lecture halls and instructor led classrooms where the instructor can have total
control of remote and local inputs
•Auto sensing, so the end user has ZERO configuration
•In-Home media rooms with one or two displays and a need for multiple, fast
switching , inputs
•Anywhere where a reliable, simple to use switch is necessary.
3
AC-SW62-UHD
Ports, Indicators & Basic Functions:
MINI USB
(Firmware)
Output
Status
Active Input
(Top is HDBaseT, Bottom HDMI) Input toggle buttons
L/R Audio Extraction
(PCM ONLY)
Relay Switch
Control
RS232
(Matrix)
RS232
(HDBaseT)
IR
(To/From
HDBT) Power
VGA & Audio
Input
HDBaseT
Input
HDMI
Inputs (x3)
HDMI and HDBaseT
Outputs (Matrix-able)
DisplayPort
Input
6x2 Classroom/Conference Room Multi-format Matrix w/
HDBaseT Input and Output
■Features
•3x HDMI 2.0 Inputs
•DispayPort & VGA Inputs
•HDBaseT Input (w/ PoE for Wall Plate Transmitter)
•HDMI & HDBaseT Matrix Outputs
•4K 30 4:4:4, 4K60 4:2:0 (HDMI input Only)
•HDR 4:2:2 12 Bit Support (HDMI input Only)
•DCI 2K, 1080P, 1920x1080x60 (VGA Support)
•4K 30 4:4:4, 4K60 4:2:0 (DisplayPort)
•HDCP 2.2 & Earlier Supported
•100M (330ft) 0n 1080P, Up to 70m (230ft) on 4K (Cat6a) In
•70M (230ft) On 1080P, 40M (131ft) on 4K (Cat6a) Out
•PoE provider for AC-EX100WPP-UHD-T Wall Plate Tx
•PoE Provider for AV-EX70-UHD-R Receiver
•Fast Switching
•Plug & Play auto input sensing
•Simple “One-touch” front panel controls
•Analog audio extraction
•RS232 & IR Control
•RS232 & IR pass through to HDBaseT Rx
•Compatible with HDBaseT displays, projectors, AVR's
•Designed for the conference/classroom room so your customer can
focus on their meetings, not their video system.
•Supports uncompressed PCM 2- Ch., 5.1, 7.1, Dolby Digital, DTS,
Dolby TrueHD, DTS HD-Master Audio, Atmos.
4
AC-SW62-UHD
■What's Included
•AC-SW62-UHD (Matrix)
•IR Emitter
•IR Receiver
•Mounting Ears
•4 ~ 3-pin terminal plugs
•1 ~ 5-pin terminal plug
•48v Power Supply
•Operating Instructions
Notice
AVProConnect reserves all the right to make changes in the hardware,
packaging and any accompanying documentation without prior written notice.
Warning
To reduce the risk of fire, electric shock or product damage:
Basic
1. Do not expose this device to
rain, moisture, dripping or
splashing and ensure that no
objects filled with liquids are
placed on or near the devices.
6. Clean this device with
a dry cloth only.
2. Do not install or place this unit
in a bookcase, built-in cabinet or
in another confined space.
Ensure the unit is well ventilated.
3. To prevent risk of electric
shock or fire hazard due to
overheating, do not obstruct
the unit’s ventilation openings
with newspapers, tablecloths,
curtains, and similar items.
4. Do not install near any heat
sources such as radiators, heat
registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
5. Do not place sources of naked
flames, such as lighted candles,
on the unit.
7. Unplug this device
during lightning storms or
when unused for long
periods of time.
8. Protect the power cord
from being walked on or
pinched particularly at
plugs.
9. Only use attachments /
accessories specified by
the manufacturer.
10. Refer all servicing to
qualified service
personnel.
5
AC-SW62-UHD
6
AC-SW62-UHD
■Specifications
7
AC-SW62-UHD
Basic Installation:
Basic Control Using Front Panel:
1. Plug in the display(s) or sink devices
2. Plug in the sources
3. Plug in the power supply to the AC-SW62-UHD
4. Power on the Sources and Display(s)
This will ensure proper EDID application across the device.
The unit is designed to be left in a room if needed so a end user can easily
change sources as pictured below:
This light indicates an
active link between the AC-
SW62-UHD and the
display(s)/sink. The light
will illuminate RED when a
connection (Hot Plug) is
present.
Use the bottom button to
toggle through inputs for
the HDMI Output
These lights indicate which
input is currently active.
The top row is the
HDBaseT Output, the
bottom row is the HDMI
Output. The active input
will illuminate RED on the
active input
Use the top button to
toggle through inputs for
the HDBaseT Output
Note on "Auto": When "Auto" is selected the device
goes into Automatic Switching Mode -See the next
page for details
The unit has an Auto-Config on boot up and reception of new sources and
displays to maximize plug and play installation:
8
AC-SW62-UHD
■Auto-Switching Logic
When the AC-SW62-UHD is in "Auto" mode the logic is to switch to the most
recently plugged in device based on a Hot Plug Event. You can have either the
HDMI, HDBaseT or both be set to "Auto" mode. See examples:
1. When a new source device (like a PC) is plugged into the AC-SW62-UHD
automatically switches to that input.
2. When an active source device is disconnected, the AC-SW62-UHD is
automatically switched back to the last source plugged in before it (so
long as it is still active). It will continue to backtrack until it finds an
active source. If no active source is found it will stop searching after one
cycle.
3. You can use the HDBaseT Input with worrying about the auto sensing.
It will work exactly as described. Meaning, a source device needs to be
plugged into the HDbaseT Transmitter for the AC-SW62-UHD to
automatically switch to it. It WILL NOT switch to it just because the
HDBaseT link it active.
Make sure this light is selected for Auto-Switching to be
enabled. You can have it active on only HDBaseT, Only
HDMI or BOTH.
9
AC-SW62-UHD
■PoE & HDBaseT (In/Out)
The AC-SW62-UHD has a HDBaseT Input and an HDBaseT Output. The
distance for HDBaseT is 70M (230ft) using UTP/STP Cat cable. PoE works as
described below.
Press and hold this button for 5 seconds to toggle PoE for
the HDBaseT INPUT. All LEDs will flash if successful.
HDBaseT Input:
•By default the PoE on the HDBaseT Input is set to OFF. This allows the
device to be compatible with any HDBaseT Transmitter of ANY brand as
long as the Transmitter can be powered.
•You can enable ieee PoE to be sent upstream to a HDBaseT Transmitter
that can be powered this way. This is an ideal feature when using the
AC-EX100WPP-UHD HDMI and VGA auto switching HDBaseT Transmitter.
•You can enable PoE buy simply pressing and holding the "HDMI" button
on the front panel for 5 seconds or sending a RS232 command (on
command list pg.11) - All LEDs flash indicating success.
HDBaseT Output:
•The HDBaseT Output is designed to power the AC-EX70-UHD-R HDBaseT
Receiver (Recommended).
•You can use ANY HDBaseT receiver, but we recommend using ones that
can be powered as power standards vary.
10
AC-SW62-UHD
•RS-232 Configuration
The AC-SW62-UHD Has two distinct RS232 Ports:
1. HDBT - This is for transmitting RS232 signals from the matrix to the
remote HDBaseT Receiver.
2. RS232-CTL - This is for send signals to the AC-SW62-UHD for
controlling the device - The Command List can be found on the next page.
For convenience there is a notepad version of the Command List on
www.avproconnect.com.
Table des matières
Autres manuels AVProConnect Commutateur matriciel
AVProConnect
AVProConnect AC-MX44-UHD Manuel utilisateur
AVProConnect
AVProConnect AC-MX1616-AUHD Manuel utilisateur
AVProConnect
AVProConnect AC-MX44-UHD Manuel utilisateur
AVProConnect
AVProConnect AVP-AC-MX44-AUHD-HDBT Manuel utilisateur
AVProConnect
AVProConnect AC-MX88-UHD Manuel utilisateur
AVProConnect
AVProConnect AC-MX44-AUHD-HDBT Manuel utilisateur
AVProConnect
AVProConnect AC-MX88-SUHD Manuel utilisateur
AVProConnect
AVProConnect AC-MX88-AUHD Manuel utilisateur
AVProConnect
AVProConnect AC-MX42-AUHD Manuel utilisateur
