Avipas AV-1361 Manuel utilisateur
Model: AV-1361
HD IPVideo Conference Camera
User Manual
V1.1
Please Read this User Manual throughout before using.
www.avipas.com
1
Attentions
Electric Safety
Installation and operation must accord with electric safety standard.
Caution to transport
Avoid stress, vibration and soakage in transport, storage and installation.
Polarity of power supply
The power supply of the product is ±12V, the max electrical current is 2A .Polarity of the power supply
drawing.
Careful of installation
Never move the camera by seizing the camera head. Don’t rotate camera head by hand; otherwise,
mechanical trouble will occur.
This series item must put on the smooth desk or platform, and it cannot be installed slant ways.
If the camera is installed on TV or computer, the base can be fixed by four double-sided adhesive trays.
Don’t apply in corrosive liquid, gas or solid environment to avoid the cover which is made up of organic
material.
To make sure no obstacle in rotation range.
Never power on before installation is completed.
Don’t disassemble discretionarily.
We are not responsible for any unauthorized modification or dismantling.
Attention
Electromagnetic filed under certain rate may affect camera image!
2
Warranty
Thank you for your interest in the products ofAVIPAS Inc.
This Limited Warranty applies to HD Conference Camera purchased from AVIPAS Inc.
This Limited Warranty covers any defects in material under normal use during the Warranty Period.
During the Warranty Period, AVIPAS Inc. will repair or replace, at no charge and products that proves
defective because of improper material, under normal use and maintenance.
The Warranty Period for HD Conference Camera purchased from AVIPAS Inc. is Two year from the date
of purchase.
This Limited Warranty does not cover any problem that is caused by:
Conditions, malfunctions or damage not resulting from defects in material
To obtain warranty service, you must first contact us to determine the problem and the most
appropriate solution for you.
Contact Details:
AViPAS Inc.
Address: 4300 Stevens Creek Blvd. Suite 230
San Jose, CA 95129
Phone:
1-844-228-4727
Fax:
(408) 228-8438
Email:
info@avipas.com
Website: http://www.avipas.com
3
Content
1. Fast Installation.........................................................................................................................................................4
1.1 Camera Interface Explanation ........................................................................................................................4
1.2 Power on Initial Configuration.......................................................................................................................4
1.3 Video output....................................................................................................................................................4
1.4 BRACKET MOUNTING...............................................................................................................................5
2.Product overview.......................................................................................................................................................8
2.1 Product introduction .......................................................................................................................................8
2.2 Main Features ...............................................................................................................................................10
2.3 Technical specification..................................................................................................................................11
2.4 Interface instruction......................................................................................................................................12
3. Application Instruction ...........................................................................................................................................16
3.1 Video Output.................................................................................................................................................16
3.2 Remote controller .........................................................................................................................................17
3.3 MENU SETTING.........................................................................................................................................19
4.Network Connection................................................................................................................................................26
4.1 Connecting Mode..........................................................................................................................................26
4.2 IE Log In.......................................................................................................................................................29
5.Serial Communication Control................................................................................................................................37
5.1 VISCA protocol list ......................................................................................................................................37
5.2,Pelco-D protocol command list ....................................................................................................................43
5.3 Pelco-P protocol command list.....................................................................................................................44
6. Camera Maintenance and Troubleshooting ............................................................................................................45
6.1 Camera Maintenance....................................................................................................................................45
6.2 Troubleshooting............................................................................................................................................45
4
1. Fast Installation
1.1 Camera Interface Explanation
Figure 1.1 AV-1361 series
1. Camera lens
2. Camera base
3. Remote Controller Receiver light
4. Bottom DIP switch
5. Tripod screw hole
6. Installation Orientation Hole
7. Rotary Switch: Video format select
8. RS232 control interface (input )
9. RS232 control interface (output )
10. RS485 input (left +,right-)
11. Audio Input interface
12. HD-SDI interface
13. DVI-I interface(including HDMI signal)
14. 10/100M Network interface
15. DC12V Input Power Supply Socket
1.2 Power on Initial Configuration
1) Power on: connect DC12V power supply adapter with NO.15 showed in Figure1.1 .
2) initial configuration: Power on with power indicator light on and remote control receiver light
blinking,camera head moves from bottom left to the bottom,and then go to the HOME position
(intermediate position of both horizontal and vertical ),while the camera module stretches. When remote
control receiver light stops blinking,the self-checking is finished.
Note: If you set preset 0,when Power on initial configuration is completed,the camera automatically
moves to the preset 0 position.
1.3 Video output
AV-1361’s video outputs: LAN,DVI (HDMI) and 3G-SDI.
1) Video output from LAN.
a. Network cable connection port: AV-1361-No.14 in Figure1.1.
b. Webpage Login: open your browser and enter 192.168.5.163 in the address bar (factory default);
press Enter to enter into the login page; click on the “player is not installed,please download and
install!" and follow the installation steps for installation. Then enter the user name admin and
password admin (factory default); press Enter to enter into the preview page,users can carry out PTZ
5
control,video recording,playback,configuration and other operations.
2) DVI(HDMI) video output
a. DVI video cable connection: AV-1361 refer to No.13 in Figure1.1.
c. Connect the camera and the monitor via DVI video cable; video output is available after camera initial
configuration.
3) 3G-SDI video output
a. 3G-SDI video cable connection: AV-1361 refer to No.12 in Figure1.1.
b. Connect the camera and the monitor via 3G-SDI video cable; video output is available after camera
initial configuration.
1.4 BRACKET MOUNTING
1) Bracket installation steps
6
2) Upside-down installation steps
7
8
2.Product overview
2.1 Product introduction
2.1.1 Product model
Model NO.: AV-1361.
Model NO.X—XXX—XXX—XX
IR ---IR remote controller
WR---wireless remote controller
AV-1361---standard interface(optional 5G wifi function)
20x optical zoom lens
S---1080P60 downward compatibility
M---1080P30downward compatibility
Please refer to corresponding features in this manual.
5Gwifi is optional for AV-1361.
2.1.2 Dimension
9
Figure 2.2 AV 1361 Camera dimension
2.1.3 Accessory
When you unpack,check that all the supplied accessories are included:
Model NO.
AV-1361
Accessory
Standard
Power adapter 1piece
RS232 cable 1piece
User manual 1piece
Double-side glue shim 4pcs
Warranty card 1piece
Optional
IR Remote controller 1piece
Wireless controller 1piece
Cascade Cable 1piece
Wall mounting bracket
Upside-down mounting bracket
Autres manuels pour AV-1361
1
Table des matières
Autres manuels Avipas Caméra IP
Avipas
Avipas AV-1360 Manuel utilisateur
Avipas
Avipas AV-1563 Manuel utilisateur
Avipas
Avipas AV-1080 Manuel utilisateur
Avipas
Avipas AV-1360 Manuel utilisateur
Avipas
Avipas AV-1160 Manuel utilisateur
Avipas
Avipas SWIT-AV-1362 Manuel utilisateur
Avipas
Avipas AV-1250 Manuel utilisateur
Avipas
Avipas AV-1330 Manuel utilisateur
Avipas
Avipas AV-105 Manuel utilisateur
Avipas
Avipas AV-1560 Manuel utilisateur
