Avico AVIR-X12VAH Manuel utilisateur
x12 ZOOM IR BULLET CAMERA
x12 ZOOM
IR BULLET CAMERA
USER’S MANUAL
■
1/4" Sony Super HAD II CCD (Double scan)
■
x12 Optical Zoom
■
High Resolution 700 TV Lines
■
Day & Night (ICR)
■
Wide Dynamic Range(x512)
■
Digital Noise Reduction(2D+3D)
■
Privacy mask Function
■
On Screen Display
■
Intelligent motion detection
■
Intelligent Object detection
■
Protocol(VISCA, Pelco-D, Pelco-P)
x12 001
Precaution
Components
Do not install the camera in extreme temperature conditions .
To avoid malfunctions, never use the camera close to a gas
or oil leak
Do not Keep the camera face tostrong light directly
Do not disassemble the camera even if troubles happened
Do not drop the camera or subject them to physical shocks.
Do not install the camera under unstable lighting conditions
Do not install or use the camera in an environment where the
humidity is high
Do not expose the camera to rain or spill beverage on it.
WDR / 3D DNR
IR BULLET CAMERA
USER’S MANUAL
WDR/3D DNR IR BULLET CAMERA
WDR/3DDNR
ZeroDefect
HighResolution of 600 TV Lines
SensUp(x512, DSS)
DIS(DigitalImage Stabilization)
PolygonalPrivacy Masking
D.Zoom(x1~x10)
Eclipse
HighSensitivity Day&Night
SCREW
MANUAL
L-WRENCH
WALL MOUNT BRACKET
SUN SHIELD
1. Features
• 1/4" Sony Super HAD II CCD (Double scan)
520K (NTSC)/ 610K(PAL) pixels
• x12 Optical Zoom
Built-in x12 optical zoom lens is highly reliable.
It features auto focus, auto iris, auto D&N, zoom function.
• High Resolution 700 TV Lines
This camera has realized high resolution of more 700 TV lines.
• Day & Night (ICR)
The ICR will automatically engage depending on the ambient light,
allowing the camera to be eective in day&night environment.
• Wide Dynamic Range(x512)
512 times WDR, more eectively than previous models,
by applying an optimum fusion ratio when combining the high speed
shutter used in bright areas and the low speed shutter used in dark areas.
• Digital Noise Reduction(2D+3D)
The DNR technology eliminates noise thus generating a distinct and clear
image. This camera DNR function utilizes both an adaptive 2D lter
reducing noise in the brightness of the image and an adaptive 3D lter
reducing noise caused by movement.
• Privacy mask Function
The privacy zone function makes it possible to make specic areas ofthe
scene from view.
• On Screen Display
This camera supports the OSD function which is used with multi language.
And so, the camera can be controlled by selecting text displayed on the
monitor screen.
• Intelligent motion detection
You can transmits an alert signal when it detects motion of an object on
the screen. This feature is useful when you have to monitor several screens
simultaneously.
• Intelligent Object detection
You can transmits an alert signal when it detects absent of an object on
the screen (or detect appearance of an object on the screen). This feature
is useful when you have to monitor several screens simultaneously.
• Protocol
This camera supports the multi-protocol (VISCA, Pelco-D, Pelco-P)
2. Names and Functions of Parts
②
①SRLEDs
② OSD Menu
③ Sun-Shield
④ Bracket
⑤ Junction Box
Service Video
DOWN / WIDE
RIGHT / FAR
ENTER
LEFT / NEAR
UP / TELE
②
③④
①
⑤
3. Installation & Connection
Wall
Monitor
Power
(Adaptor Plug)
Adaptor
Video Cable
DVR
RS485 +
RS485 -(White)
RS485 +(Orange)
(Option)
RS485 -
PORT2
TX
+
_+
_+
_+
_
RX TX RX
PORT1
DC Power Connecting
4. How to Set up the Function
MAIN MENU
Functions can be setup using 5 buttons on the
camera's rear panel.
[MENU]
[EXIT] [SAVE] [DELT]
FOCUS
EXPOSURE
WHITE BALANCE
IMAGE
INTELLIGENCE
SPECIAL FUNC
DISPLAY
MENU Key : Shows Menu / Select item
TELE(UP)/WIDE(DOWN) : Moves up and down items
NEAR(LEFT)/FAR(RIGHT) : Set data for the selected item
Main Screen OSD
“Title”
①
②
ID:001
!Object!
!Motion! x0001③
The Menu consists of the “Main Menu” and “Sub Menu”.
The main menu is displayed where 7 camera functions can be selected.
To the right of each main menu selection, the sub-menu is displayed
If you want to save the menu, select [SAVE].
If you don’t want to save the menu, select [EXIT] (After select , Power off -> on)
If you want to default the menu, select [DFLT]
Camera title.
Camera ID.
Status of the zoom position.
Alarm message of the Object Detection function
Alarm message of the Motion Detection function
FOCUS
EXPOSURE
[MENU]
[EXIT] [SAVE] [DELT]
FOCUS
EXPOSURE
WHITE BALANCE
IMAGE
INTELLIGENCE
SPECIAL FUNC
DISPLAY
[EXIT][SAVE] [DELT]
[FOCUS]
MODE
DISTANCE
LENS REFRESH
E.ZOOM
AUTO
0.1m
OFF
OFF
· MODE : Select auto focus mode
AUTO, ONE PUSH, MANUAL
· DISTANCE : Select minimum distance in focus between camera and object.
0.1 / 1.3 / 1.8 / 3.0 / 5.0 m ( 36x )
0.1 / 1.0 / 1.5 / 2.5 / 6.0 m ( 22x )
0.1 / 1.0 / 1.3 / 2.0 / 6.0 m (12x )
· LENS REFRESH : Lens origin calibrated automatically.
OFF / ON (1 day ~ 10 days)
· E.ZOOM : Select maximum digital zoom magnification.
OFF / ON (max x2 ~ x19, x21, x23, x25, x28, x32)
[MENU]
[EXIT] [SAVE] [DELT]
FOCUS
EXPOSURE
WHITE BALANCE
IMAGE
INTELLIGENCE
SPECIAL FUNC
DISPLAY
[EXIT] [SAVE] [DELT]
[EXPOSURE]
MODE
AGC
SHUT SPEED
IRIS
DSS
FLICKERLESS
BRIGHTNESS
WDR/BLC
DAY&NIGHT
AUTO
ON
...
...
OFF
OFF
8
OFF
·
MODE : Select exposure mode
AUTO / SHUT.P/ IRIS.P / MANUAL
①SRLEDs
② OSD Menu
③ Sun-Shield
④ Bracket
⑤ Junction Box
·AGC : Select Auto Gain Control
OFF / ON (AUTO, SHUT.P or IRIS.P Mode)
0/2/4/6/8/10/12/14/16/18/20/22/24/26/28/30dB
(MANUAL Mode)
·SHUT SPEED : Can be set in SHUT.P or MANUAL mode.
NTSC : x512, x128, x64, x32, x16, x8, x4, x2, 1/60, 1/90, 1/100, 1/180, 1/250,
1/500, 1/1000, 1/1500, 1/2000, 1/5000, 1/10000, 1/20000, 1/50000, 1/100000 sec
PAL : x512, x128, x64, x32, x16, x8, x4, x2, 1/50, 1/80, 1/120, 1/150, 1/250, 1/500,
1/1000, 1/1500, 1/2000, 1/5000, 1/10000, 1/20000, 1/50000, 1/100000 sec
Slow shutter speed (x2 ~ x512) can be set in MANUAL mode.`
·IRIS : Iris level can be set in IRIS.P mode.
1 ~ 18 steps
·DSS : Select Max DSS (Digital Slow Shutter)
OFF / x2, x4, x8, x16, x32, x64, x128, x512
·FLICKERLESS : Select Flickerless mode
OFF/ ON (remove screen flicker)
·BRIGHTNESS: Adjust brightness level
1 (dark) ~ 15 (bright) steps
·WDR/BLC : Select WDR (Wide Dynamic Range) or BLC (Back Light Compensation)
OFF / WDR / BLC
WDR : Select level
1 ~ 7 steps
BLC : Select area, level, mode
Area(1 ~ 9), Level (low / mid / high) and Auto / manual
·DAY&NIGHT : Select Day&Night
Mode : Select Day&Night mode
DAY / NIGHT / AUTO / EXT
Delay : Adjust the working time of the filter when Day&Night operated.
5/10/15/20/25/30/35/40/45/50/55/60 sec
BURST : When you select BW, you can burst off/on
OFF / ON
EXPOSURE -ALC
[MENU]
[SAVE] [DELT]
FOCUS
EXPOSURE
WHITE BALANCE
IMAGE
INTELLIGENCE
SPECIAL FUNC
DISPLAY
[EXIT][SAVE] [DELT]
[WHITE BALANCE]
MODE
RED GAIN
BLUE GAIN
ATW
...
...
·MODE : Select white balance mode
ATW / ONE-PUSH / INDOOR / OUTDOOR / MANUAL / AUTO
ATW : Automatically adjusts color according to the available lighting.
ONE-PUSH : Color will be automatically adjusted while the SET button is
pressed in the temporary automatic mode.
INDOOR : Set color temperature to be Indoor light.
OUTDOOR : Set color temperature to be Outdoor light.
MANUAL: Color can be corrected when the user increases or decreases
“Red Control" or "Blue Control".
AUTO : Wide color temperature range (more ATW range)
·RED GAIN : Adjust R gain value in Manual Mode (0 ~ 255)
·BLUE GAIN : Adjust B gain value in Manual Mode (0 ~ 255)
WHITE BALANCE SETTING
[MENU]
[EXIT][SAVE] [DELT]
FOCUS
EXPOSURE
WHITE BALANCE
IMAGE
INTELLIGENCE
SPECIAL FUNC
DISPLAY
[EXIT][SAVE] [DELT]
[IMAGE]
DNR
HR
MIRROR
SHARPNESS
EFFECT
FREEZE
AUTO
3
OFF
8
OFF
OFF
·DNR : On screen digital noise reduction
OFF / 1 ~ 10(Select noise reduction level) / Auto(DNR level is adjusted automatically)
·HR : Select High resolution
OFF / ON(1 ~ 7)
·MIRROR : Select a flip mode
IMAGE
[EXIT]
[MENU]
[EXIT][SAVE] [DELT]
FOCUS
EXPOSURE
WHITE BALANCE
IMAGE
INTELLIGENCE
SPECIAL FUNC
DISPLAY
[EXIT]
[INTELLIGENCE]
PRIVACY
MOTION DET
ABSENTDET
OFF
/ V (You can flip the picture vertically on the screen)
/ H (You can flip the picture horizontally on the screen)
/ H&V (You can flip the picture Horizontally & vertically on the screen)
·SHARPNESS : Adjust sharpness level
1 ~ 16 steps
·EFFECT : Select the negative or B/W effect
OFF / NEGATIVE / B/W
·FREEZE : Select real or still mode
OFF / ON
·PRIVACY : Hide an area you want to hide on the screen
MASK# : Select mask area number(1 ~ 16)
MODE : Mask enable or disable (OFF / ON)
MOSAIC TYPE : Mosaic roughness setting(1 ~ 8)
MOSAIC : Mosaic display (OFF/ ON)
COLOR : Select mask color (1 ~ 14)
TRANSPARENCY : Select mask transparency level (0 ~ 3)
POSITION : Adjust the mask position
SIZE : Adjust the mask size
·MOTION DET : When there is movement of the subject in the screen, there will be
an motion detection.
MODE : MD function enable or disable (OFF / ON)
AREA# : Select MD area number(1 ~ 3)
INTELLIGENCE
Table des matières
Autres manuels Avico Caméra de sécurité
Avico
Avico AVIP-HDT4130V Manuel utilisateur
Avico
Avico AL-2WTD66VAH Manuel utilisateur
Avico
Avico AVDIR-HDT70VAHD Manuel utilisateur
Avico
Avico AMH-W320B/ES Manuel utilisateur
Avico
Avico APO-SDI20M-NX20W Manuel utilisateur
Avico
Avico 630TVLD-WDR Manuel utilisateur
Avico
Avico 700TVL X-WDR/3D DNR Manuel utilisateur
Avico
Avico APD-HD80F Manuel utilisateur
Avico
Avico 700TVL X-WDR/3D DNR Manuel utilisateur
