AVGear AVG-USB450 Manuel utilisateur
AVG-USB450
Thanks for choosing the AVG-USB450 extender
kit which consists of a transmitter (Tx) and a
receiver (Rx). It serves as a four in one USB
hub and extends USB 2.0 signals up to 50
meters over a Cat5e/6/7 cable.
The transmitter is powered by the computers
USB outlet. The power supply is used at the
remote receiver that’s helps provide sufficient
power to any type of USB device, such as flash
drives, keyboards, mouses, cameras, or
printers, etc.
With its durable metal housing, this high-quality
USB extender provides a fast and flexible
solution for users. In addition, the compact size
enables space-saving installation.
Features
▪High-Speed USB 2.0 compliant, the
transfer data rate is up to 480Mbps.
▪Transmission distance is up to a
maximum of 50m over a CAT5e/6/7
cable.
▪Equipped with 4 USB peripherals to
connect with keyboards, mouse,
cameras and more.
▪The first two USB-A ports provide 5V
1A each, and the other two output
5V 500mA each.
▪Compatible with Windows, IOS and
Linux.
▪Plug and play.
AVG-USB450
PLEASE READ THIS PRODUCT MANUAL CAREFULLY
BEFORE USING THIS PRODUCT.
This manual is only for operation instruction only, and
is not to be used in a maintenance capacity. The
functions described in this version are current as at
June 2021. Any changes of functions and operational
parameters will be updated in future manual versions.
Please refer to your dealer for the latest product
details.
Version 1.0 09/07/21
AVG-USB450
SAFETY OPERATION GUIDE
In order to guarantee the reliable operation of the equipment and safety of the
user, please abide by the following procedures in installation, use and
maintenance:
1. The system must be earthed properly. Please do not use two blade plugs
and ensure the AC power supply ranges from 100v to 240v and from 50Hz
to 60Hz.
2. Do not install the unit in an environment where it will be exposed to extreme
hot or cold temperatures.
3. This unit will generate heat during operation, please ensure that you allow
adequate ventilation to ensure reliable operation.
4. Please disconnect the unit from mains power if it will be left unused for a
long time.
5. Please DO NOT try to open the casing of the equipment, DO NOT attempt to
repair the unit. Opening the unit will void the warranty. There are high
voltage components in the unit and attempting to repair the unit could result
in serious injury.
6. Do not allow the unit to come into contact with any liquid as that could result
in personal injury and product failure.
AVG-USB450
TABLE OF CONTENTS
Introduction..............................................................................................................1
Introduction to the AVG-USB450 ................................................................. 1.1
Features....................................................................................................... 1.2
Package List................ ……………………………………………………………………2
Product Appearance of the AVG-USB450..............................................................3
Front Panel ...................................................................................................3.1
System Connection .................................................................................................4
AVG-USB450
1. Introduction
1.1. Introduction to the AVG-USB450
Thanks for choosing the AVG-USB450 extender kit which consists of a transmitter (Tx)
and a receiver (Rx). It serves as a four in one USB hub and extends USB 2.0 signals
up to 50 meters over a Cat5e/6/7 cable.
The transmitter is powered by the computers USB outlet. The power supply is used at
the remote receiver that’s helps provide sufficient power to any type of USB device,
such as flash drives, keyboards, mouses, cameras, or printers, etc.
1.2. Features
▪High-Speed USB 2.0 compliant, the transfer data rate is up to 480Mbps.
▪Transmission distance is up to a maximum of 50m over a CAT5e/6/7 cable.
▪Equipped with 4 USB peripherals to connect with keyboards, mouse, cameras and
more.
▪The first two USB-A ports provide 5V 1A each, and the other two output 5V 500mA
each.
▪Compatible with Windows, IOS and Linux.
▪Plug and play.
AVG-USB450
2. Package List
▪1x Transmitter (TX)
▪1x Receiver (RX)
▪1x Power Adaptor (DC12V2A)
▪1 x USB-A male to USB-B male Cable (1m)
▪1x User Manual
Note: Please confirm if the product and the accessories are all included, if not, please
contact your dealer.
AVG-USB450
3. Product Appearance of the AVG-USB450
Transmitter Panel Description
No.
Name
Description
①
HOST
Type-B USB port to connect with the computer.
②
Power LED
Illuminates green when the unit is powered on.
③
CATx
RJ45 connector for a CAT5e/6/7 Ethernet cable to connect the
transmitter and the receiver.
Receiver Panel Description
No.
Name
Description
①
USB Ports
Type-A USB ports to connect with keyboards, mouse,
microphone, camera and more.
The first two ports provide 5V 1A each, and the other two output
5V 500mA each.
②
DC 12V
DC barrel connector to connect the AC power adapter.
③
Power LED
Illuminates green when the unit is powered on.
④
CATx
RJ45 connector for a CAT5e/6/7 Ethernet cable to connect the
transmitter and the receiver.
AVG-USB450
4. System Connection
Note 1: This picture is for reference only and may not apply in your installation
application.
Note 2: This transmission distance between TX and RX is affected by the following:
⚫The lengths of USB cables.
⚫The number of USB HUBS cascaded
⚫The type of Ethernet cable.
Table des matières
Autres manuels AVGear Extenseur
AVGear
AVGear AVG-HD300 Manuel utilisateur
AVGear
AVGear AVG-HD220 Manuel utilisateur
AVGear
AVGear AVG-HD50 Manuel utilisateur
AVGear
AVGear AVG-FO200 Manuel utilisateur
AVGear
AVGear AVG-HD320 Manuel utilisateur
AVGear
AVGear AVG-HD100 Manuel utilisateur
AVGear
AVGear AVG-HD200 SETAVG-HD200R Manuel utilisateur
AVGear
AVGear AVG-HD350A Manuel utilisateur
AVGear
AVGear AVG-HD600 Manuel utilisateur
AVGear
AVGear AVG-HD550 Manuel utilisateur
