Avenview HBT-C6POE-EX Manuel utilisateur
VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES
Control Your Video
HDBaseT HDMI CAT5/6/7 Repeater with
IR /RS-232/LAN/ POE up to 300m
© 2013Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Model #: HBT-C6POE-EX
Military Residential
Medical Aviation
Education Industrial
Corporate House Of Worship
www.avenview.com
Product Application & Market Sectors
www.avenview.com Page
3
TABLE OF CONTENTS
1. GETTING STARTED ..........................................................................................................................1
1.1 IMPORTANT SAFEGUARDS..............................................................................................................1
1.2 SAFETY INSTRUCTIONS ..................................................................................................................1
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) ........................... 2
2. INTRODUCTION ..............................................................................................................................3
2.1 PACKAGE CONTENTS .....................................................................................................................4
2.2 BEFORE INSTALLATION...................................................................................................................5
2.3 CABLE SPECIFICATIONS ..................................................................................................................5
3. APPLICATION DIGRAM ....................................................................................................................6
4. PANEL DESCRIPTION.......................................................................................................................7
4.1 INPUT PANEL (HBT-C6POE-EX) Front.....................................................................................7
4.2 INPUT PANEL (HBT-C6POE-EX) Rear......................................................................................7
5. IR CABLE DEFINITION.....................................................................................................................8
6. INSTALLATION (HBT-C6POE-EX with HBT-C6POE-SET)..............................................................9
7. GENERAL TROUBLESHOOTING...................................................................................................10
8. SPECIFICATIONS .............................................................................................................................11
www.avenview.com Page
1
SECTION 1: GETTING STARTED
1.1 IMPORTANT SAFEGUARDS
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
•Any product, on which the serial number has been defaced, modified or removed.
•Damage, deterioration or malfunction resulting from:
•Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•Repair or attempted repair by anyone not authorized by us.
•Any damage of the product due to shipment.
•Removal or installation of the product.
•Causes external to the product, such as electric power fluctuation or failure.
•Use of supplies or parts not meeting our specifications.
•Normal wear and tear.
•Any other causes which does not relate to a product defect.
•Removal, installation, and set-up service charges.
1.2 SAFETY INSTRUCTIONS
The HBT-C6POE-EX HDBaseT HDMI CAT5/6/7 Repeater set has been tested for conformance to safety regulations and
requirements, and has been certified for international use. However, like all electronic equipments, the HBT-C6POE-EX
should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the
risk of damage to the unit.
!Do not dismantle the housing or modify the module.
!Dismantling the housing or modifying the module may result in electrical shock or burn.
!Refer all servicing to qualified service personnel.
!Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards
!Keep the module away from liquids.
!Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
!Have the module checked by a qualified service engineer before using it again.
!Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
1. GETTING STARTED
www.avenview.com Page
2
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols Description
ONLY USE THE PROVIDED POWER CABLE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE
ELECTRICAL PARTS. THIS MAY RESULT IN ELECTRICAL
SHOCK OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL
VOID THE WARRANTY AND CONTINUED USE OF THE
PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A
SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT.
www.avenview.com Page
3
2. INTRODUCTION
Avenview HBT-C6POE-EX HDBaseT™ Repeater simply allows HDBaseT systems to be both extended and cascaded.
Supports the highest quality of uncompressed HD video up to 4K×2K (Ultra HD), also 8 channels of uncompressed multi-
channel audio. Built in data functions - RS-232 and IR control systems, this unit also supports PoE and Ethernet. HDBaseT
5Play™ convergence over a single CAT5e/6/7 cable.
Video Signals: 4K2K@30 (Ultra HD), 3D, 8/10/12 Deep Color, and Full HD 1080p@60 Hz/36-bit color depth.
Audio signals: Lossless Multi-channel audio formats (DTS-HD Master Audio, Dolby TrueHD).
Data Signals: Bi-Directional IR signals 30 KHz to 50 KHz over CAT5/6.
The HBT-C6POE-EX includes one (1) unit: Repeating unit (EX) HBT-C6POE-EX with one (1) UTP output port which allows
the user to extend video and audio up an extra 100m (330ft). The HBT-C6POE-EX also allows extends bi- directional IR
control of the source connected to the HBT-C6POE-S TX from the users IR remote control at the monitor side. Compatible
with HBT-C6POE-SET and HBT-C6PLT-SET
The bonus features with this device it can be powered by the 24V from the TX PoE (Power over the CATx cable to the RX)
also extends Internet (100Mbps Ethernet service when connected to a Router at the TX). These features has been added to
this unit to give the installer and user a complete solution with the new trends in online streaming, network connected devices
and new demand in Smart TV, Ultra HD monitors and content.
- Input: HDMI with 3D & 4Kx2K, 1080p,HDCP and DVI compliant
- Video bandwidth: From 300MHz / 9 Gbps
- Pc resolutions: Up to VGA to WUXGA
- HD resolutions: Up to 4Kx2K (3840x2160@30Hz and 4096x2160@24Hz)1080p (1920x1080@60Hz)
- Audio supported: LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
- Audio transmission: (32-192kHz sample rate)
- Supports: CEC bypass
- Distance: Extra 100 meters connected with HBT-C6POE-SET through CAT6e/6a/7 cables =200m
(300m with additional Repeater unit) Cascading HDBaseT Matrixes
- Ethernet transmission: Rate up to 100Mbps
- Uncompressed video: 1080p, 60 Hz, 36-bit
- Service: USB for Manufacturer USE ONLY
- 3D support: Follow by Display / TV’s EDID
- 5Play™ convergence: HDMI, LAN, PoE & Bi Directional Control (IR & RS-232)
NOTE
Note: The PoE function is ativated with a powered TX to this repeater so it requires no external power supply connection.
When the repeater power supply connection is used, the power from the transmitter unit can be used to power a receiver
unit connected to the repeater, but that receiver has to be PoE-enabled and compatible with both the Tx and the repeater.
Features:
www.avenview.com Page
4
2.1 PACKAGE CONTENTS
Before you start the installation of the converter, please check the package contents.
1HBT-C6POE-EX
POWER ADAPTER (24V/1.25A DC) X1
USER’S MANUAL X 1
3
2
www.avenview.com Page
5
2.2 BEFORE INSTALLATION
•Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
•Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
•Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.
•Do not twist or pull by force ends of the UTP Cable. It can cause malfunction.
2.3 CABLE SPECIFICATIONS
To achieve best results we highly recommend the use of a high quality 26 or 24 AWG HDMI cable with the below
specifications to maintain signal integrity and distances when using our SPLIHD42K.
Features
• Length: 5m (16ft) to 15m (50ft)
• Bandwidth: 10.2 Gbps data transfer rate
• Supports Resolution: Up to 3840x2160 @ 24Hz and 4096x2160 @ 24Hz, 1080p @ 24Hz / 50/60Hz/3D
• Conductor gauge: 26 / 24 AWG
• Deep Color
• 3D Capable
• CEC
• Ethernet Channel
• Audio Return Channel
• Connector 1: HDMI (Type A) Male
• Connector 2: HDMI (Type A) Male
www.avenview.com Page
6
3. APPLICATION DIGRAM
www.avenview.com Page
7
4. PANEL DESCRIPTION
4.1 INPUT PANEL (HBT-C6POE-EX) Front
1. MODE LED:Yellow LED will flash when
the unit is powered or when an active
receiver is connected
2. CAT5e/6 OUT: Connects to the receiver unit with a
single CAT5e/6/7 cable (up to 100m)
3. LINK LED: Green LED will illuminate when output is connected to an active receiver. The LED will
flash if there is a problem with the connection.
4.2 INPUT PANEL (HBT-C6POE-EX) Rear
1.CAT5e/6 IN: Connect to the transmitter unit
with a single CAT5e/6/7 cable (up to 100m)
2.POWER LED: Blue LED illuminates when the unit is
powered by a power supply or a PoE transmitter
3.POWER:Connect Power adapter 24V DC
included in the package
123
123
Table des matières
Autres manuels Avenview Répétiteur
