Avenview SW-DVI-2X4 Manuel utilisateur

www.avenview.com

2 In 4 Out DVI Matrix Switch

User’s Guide

Models

SW-DVI-2X4

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations

or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to

specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual

property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes

no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied

warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly

prohibited.

www.avenview.com

Table of Contents

Section 1: Getting Started...................................................................................................................... 3

1.1 Important Safeguards ............................................................................................................ 3

1.2 Safety Instructions ................................................................................................................. 3

1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4

1.4 Introduction ........................................................................................................................... 4

1.5 Features ................................................................................................................................. 4

1.6 Package Contents................................................................................................................... 5

1.7 Before Installation.................................................................................................................. 5

1.8 Panel Description................................................................................................................... 6

1.9 DIP Switch .............................................................................................................................. 7

1.10 IR Remote Control.................................................................................................................. 8

Section 2: Installation............................................................................................................................. 8

Section 3: Specifications......................................................................................................................... 9

www.avenview.com

Section 1: Getting Started

1.1 Important Safeguards

Please read all of these instructions carefully before you use the device. Save this manual for future

reference.

What the warranty does not cover

Any product, on which the serial number has been defaced, modified or removed.

Damage, deterioration or malfunction resulting from:

Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized

product modification, or failure to follow instructions supplied with the product.

Repair or attempted repair by anyone not authorized by us.

Any damage of the product due to shipment.

Removal or installation of the product.

Causes external to the product, such as electric power fluctuation or failure.

Use of supplies or parts not meeting our specifications.

Normal wear and tear.

Any other causes which does not relate to a product defect.

Removal, installation, and set-up service charges.

1.2 Safety Instructions

The SW-DVI-2X4 DVI Matrix has been tested for conformance to safety regulations and requirements, and has

been certified for international use. However, like all electronic equipments, the SW-DVI-2X4 should be used

with care. Please read and follow the safety instructions to protect yourself from possible injury and to

minimize the risk of damage to the unit.

Do not dismantle the housing or modify the module.

Dismantling the housing or modifying the module may result in electrical shock or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing housing may expose you to

dangerous voltage or other hazards

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid

falls or spills on to the housing, unplug the module immediately.

Have the module checked by a qualified service engineer before using it again.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before

cleaning.

www.avenview.com

1.3 Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this

equipment.

1.4 Introduction

The SW-DVI-2X4 allows you to switch between two DVI sources and four DVI displays independently with

compact pattern generator functionality. Any input can be switched into any output through a remote control.

To simplify the switching process, SW-DVI-2X4 comes with an IR remote control. If you don’t have an IR

remote control nearby, SW-DVI-2X4 can also be configured by two DIP switches (one rotary switch and one

DIP switch). Furthermore, the SW-DVI-2X4 is designed to regenerates every signal carried to itself so that

every signal sent out from the SW-DVI-2X4 is as crystal clear as the original.

1.5 Features

-Pixel Rate up to 165MHz.

-Maintains highest resolution digital video with no loss of quality

-Configured by IR remote control with OSD display.

-Embedded Pattern Generator.

-Supports EDID learning. The SW-DVI-2X4 can get the EDID information for the output device and pass

it to the input equipment.

-DIP switch configuration. Without IR remote control, the switcher can also be configured by the DIP

switch and the rotary switch.

-Can be cascaded more than two tiers. The signal carried to the SW-DVI-2X4 will be decoded and

encoded.

-Compact size.

www.avenview.com

1.6 Package Contents

Before you start the installation of the converter, please check the package contents.

-SW-DVI-2X4 x 1

-DVI Y Cable x 3

-IR Remote Control x 1

-Power Adapter (+5VDC) x 1

-User’s Manual x 1

1.7 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause an

injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high

humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used then it

may cause a fire.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com

1.8 Panel Description

FRONT PANEL

1. DVI Output Connector 1

2. DVI Output Connector 2

REAR PANEL

3. 5V DC Power

4. DVI Input Connector

5. DIP Switch

6. EDID LED Indicator

7. Power Indicator

8. IR Receiver

www.avenview.com

1.9 DIP Switch

When remote control is not available, the SW-DVI-2X4 can be configured by DIP Switch:

-DIP Switch 1 should always be set to ON

-When you need to configure the SW-DVI-2X4 by DIP switch, set the DIP Switch 2 at ON. Set it to OFF

only when you need to control the device with provided remote control

DIP Switch

3 ON

3 OFF

4 ON

Output 4

Output 3

4 OFF

Output 2

Output 1

Rotary switch allows you to select an Input Source or a test pattern.

Rotary Switch

Function

Source 1

Source 2

Pattern 1

Pattern 2

Reserved

Pattern 4

Pattern 5

Reserved

www.avenview.com

1.10 IR Remote Control

-Press “Menu” to launch OSD and use arrow buttons to select options in the OSD menu.

-Right arrow button allows you to confirm your selection

-Press “Menu” again to exit the OSD menu

Note: Only four arrow buttons and the menu buttons are currently active.

Section 2: Installation

Follow these instructions for installation of SW-DVI-2X4:

1. Connect DVI Y Cable to DVI Input

2. Connect DVI Y Cable to DVI Output 2 and DVI Output 3

3. Connect source 1 and source 2 to the Y Cable that is plugged in to DVI Input

4. Connect display 1 and display 2 to the Y Cable that is plugged in to DVI Output 1

5. Connect display 3 and display 4 to the Y Cable that is plugged in to DVI Output 2

6. Turn the source and output displays ON

7. Plug in power to SW-DVI-2X4

www.avenview.com

Section 3: Specifications

Item

Description

Model

SW-DVI-2X4 (DVI Matrix Switch)

Supported Input / Output

DVI

Video Bandwidth

1.65 Gbps

Resolutions

1080p60, WUXGA (1920x1200@60)

Input

1 x DVI

Output

2 x DVI

DVI Connector

DVI-I 29 pin female (digital only)

Input Selection

IR Remote

Dimensions

5.1” x 4.3” x 1” (L x W x H)

Weight

2 lbs

Power Supply

5V 4A DC

Power Consumption

10 Watts (max)

Operating Temperature

0~40°C [32~104°F]

Storage Temperature

-20~60°C [-4~140°F]

Relative Humidity

20~90% RH [no condensation]

www.avenview.com

Disclaimer

While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the

operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of

Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of

anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the

Avenview hardware, software, or other products and documentation provided herein.

Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,

function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties

regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and

non-infringement.

Table des matières

Autres manuels Avenview Commutateur matriciel

Avenview

Avenview SW-HDM-2X2 Manuel utilisateur

Avenview

Avenview SW-HDM3D-C6-8X8E Manuel utilisateur

Avenview

Avenview SW-HDM3D-C6-4X4E Manuel utilisateur

Avenview

Avenview SW-VGA-5X5 Manuel utilisateur

Avenview

Avenview SW-HDMI-C5-4X4 Manuel utilisateur

Avenview

Avenview DVI-SPLITPRO-4K Manuel utilisateur

Avenview

Avenview SW-HBT-C6IRLT-4X4E Manuel utilisateur

Avenview

Avenview HDMI-C5SW-R Manuel utilisateur

Avenview

Avenview SW-VGA-5X5 Manuel utilisateur

Avenview

Avenview SW-HBT4K-C6-8X8E Manuel utilisateur

Avenview

Avenview HDM-C6MXIP-SET Manuel utilisateur

Avenview

Avenview SW-HDM3D-C6-8X8E Manuel utilisateur

Avenview

Avenview HDM3D-C5SW-R Manuel utilisateur

Avenview

Avenview SW-DVI-16X16 Manuel utilisateur

Avenview

Avenview HDM-SWITCHPRO-VW4 Manuel utilisateur

Avenview

Avenview HDM-C6MX/WIP-SET Manuel d'installation et d'exploitation

Avenview

Avenview SW-HDM2-T4K-4X4 Manuel utilisateur

Avenview

Avenview SW-HBT-C6IRLT-8X8E Manuel d'utilisation et d'entretien

Avenview

Avenview SW-VGA-5X5 Manuel utilisateur

Avenview

Avenview SW-DVI-4X2 Manuel utilisateur

Avenview

Avenview SW-HBT-C6POE-16X16E Manuel utilisateur

Manuels Commutateur matriciel populaires d'autres marques

Broadcast Tools

Broadcast Tools SS 8.2 Manuel utilisateur

Altimium

Altimium MATF32 Manuel utilisateur

ALFAtron

ALFAtron ALF-MUK44N Manuel utilisateur

Monoprice

Monoprice Blackbird 15377 Manuel utilisateur

Kramer

Kramer XL 3216VS Manuel utilisateur

PTN

PTN FMX12 Manuel utilisateur

CYP

CYP nT15GX01 Manuel utilisateur

Kramer

Kramer VP-2x2 Manuel utilisateur

Kramer

Kramer Sierra Video 6432V5xl Manuel utilisateur

TESmart

TESmart HMA0402A40 Manuel utilisateur

Octava

Octava HD4XSTPMX Manuel utilisateur

Intelix

Intelix FLX-88 Mode d'emploi

Kramer

Kramer LASSEN XL 3232S Manuel utilisateur

Roland

Roland XS-1HD Manuel utilisateur

Kramer

Kramer VS-66HDCPxl Manuel utilisateur

Atlona

Atlona AT-HDMI-22M Manuel utilisateur

Link

Link HD8X8 Manuel utilisateur

AMX

AMX AVS-OP-2020-117 Instructions et recettes