・Safety Precautions
When a connector is removed during installation, testing, or servicing, or
when an energized fiber is broken, a risk of ocular exposure to optical
energy that may be potentially hazardous occurs, depending on the laser
output power.
The primary hazards of exposure to laser radiation from an optical-fiber
communication system are:
•Damage to the eye by accidental exposure to a beam emitted by a
laser source.
•Damage to the eye from viewing a connector attached to abroken
fiber or an energized fiber.
Connect & Log In the Device
1. Connecting to media converter console port
2. Login with default account and password.
Username / Password: admin / none
TELNET/SSH & Change IP Address
1. PC connect to media converter Ethernet port
2. Key-in the default IP address 192.0.2.1 under Telnet/SSH tool.
3. Login with default account and password.
Username / Password: admin / none
・Management
・LED Indication
www.avcomm.us
AVCOMM
Ethernet Interface Connecting (Fiber, SFP)
For a 1000 Mbps fiber port available, please use the mini-GBIC SFP.
These accept plug in fiber transceivers that typically have an LC style
connector. They are available with multimode, single mode, long-haul or
special-application transceivers.
Ethernet Interface Connecting (RJ45 Ethernet)
Connecting the Ethernet interface via RJ45:
•To connect to aPC, use a straight-through or a cross-over Ethernet
cable.
•To connect the media converter to an Ethernet device, use UTP
(Unshielded Twisted Pair) or STP (Shielded Twisted Pair) Ethernet
cables.
The pin assignment of RJ-45 connector is shown in the following figure
and table.
Pin Assignment
1,2 T/RxA+,T/RxA-
3,6 T/RxB+,T/RxB-
4,5 T/RxC+,T/RxC-
7,8 T/RxD+,T/RxD-
Console Connection
The Console port is for local management by
using a terminal emulator or a computer with
terminal emulation software.
•DB9 connector connect to computer COM port
•Baud rate: 9600bps
To connect the host PC to the console port, a RJ45 (male) connector-to-
RS232 DB9 (female) connector cable is required.The RJ45 connector of
the cable is connected to the CID port of media converter; the DB9
connector of the cable is connected to the PC COM port. The pin
assignment of the console cable is shownbelow:
LED Description Indicator/
Color Condition
PWR On Green Power is supplied.
Off No power is supplied.
OAM On Red Remote device alarm is
detected
Off Remote Alarm State
release.
Alarm On Red Lights during rebooting
or device has alarm
state.
Off Alarm State release.
Management
Port Link/Act
On Green Ethernet is link up.
Flashing Green Frames are
transmitted/received.
Off Ethernet is link down.
Management
Port Speed
On Green Link up at 1000Mbps.
Off Link up at 10/100Mbps.
Port1 Link/Act
On Green Ethernet is link up.
Flashing Green Frames are
transmitted/received.
Off Ethernet is link down.
Port1 SPEED On Green Link up at 1000Mbps.
Off Link up at 10/100Mbps.
Port2
Link/Act
On Green Ethernet is link up.
Flashing Green Ethernet link up and
trafficisdetected.
Off Ethernet is link down.
PoE (For 6003GX-
POE Only)
On Green PoE power is running in
normal way.
On Amber PoE abnormal event is
detected.
Off No PoE power supply. AVCOMM reserves the right to make changes to this QIG or to the
product hardware at any time without notice. It is the user’s
responsibility to determine whether there have been any such
updates or amendments herein.
Defects, malfunctions, or failures of the warranted Product(s) caused
by damage resulting from unforeseeable incidents (such as lightings,
floods, fire, etc.), environmental and atmospheric disturbances, other
external forces such as power line disturbances and surge, host
computer malfunction and virus, incorrect power input, or incorrect
cabling, incorrect grounding and damages caused by misuse, abuse
and unauthorized alteration or repair are not warranted.
・Disclaimer
・Support
At AVCOMM, you can use the online service forms to request the
support.The submitted forms are stored in server for AVCOMM
team member to assign tasks and monitor the status of your
service. Please feel free to write to info@avcomm.us if you
encounter any problems.
・Warranty
5-year Global warranties are available for AVCOMM products
assuring our customers that the products shall remain free from
defects in workmanship or materials and conform in all material
respects to AVCOMM specifications, or Purchaser’s supplied and
accepted specifications. The warranty is limited to the repair and/or
replacement, at AVCOMM’sole discretion, of the defective product
during its warranty period. The customer must obtain a Return
Merchandise Authorization (RMA) approval code prior to returning
the defective Product to AVCOMM for service. The customer agrees
to prepay shipping charges, to use the original shipping container or
equivalent, and to ensure the Product or assume the risk of loss or
damage in transit. Repaired or replaced products are warranted for
ninety (90) days from the date of repair or replacement, or for the
remainder of the original product's warranty period, whichever is
longer.
・Interface
