Avaya 1616 Instructions d'utilisation

Page 1

Avaya IP Office Essential

Setting Up a 1616 H323 IP Phone

Telquest Tech Suppo t

Before you can do anything with the 1616 IP Phone, you must have the following information:

The correct License(s) are installed in the SU.

The Extension and User for the 1616 IP phone have been created in the SU.

The LAN Port on the SU is programed and connected correctly.

The Public IP Address of the Avaya IP Office Telephone System ( SU).

The Local IP Address you want to assign to the 1616 phone.

The Local IP Address of the Router/Gateway that the 1616 phone is connected to.

The Local Subnet Mask of the Router/Gateway that the 1616 phone is connected to.

The Extension Number to be assigned to the 1616 phone.

The Password assigned to the 1616 phone.

These are basic and general instructions. Your needs may be different.

I suggest that you read over these instructions first.

Watch the LCD on the 1616 phone closely... This happens fast...

Apply power to the phone by its power transformer or by POE via the network cable.

The Avaya 1616 phone will not pull an IP Add ess via a local DHCP.

It equi es ce tain Options to be set in the DHCP Se ve fo this to wo k.

Just be p epa ed assign it a Static IP Add ess.

On older 1616 phones:

When you see "* to p og am" on the screen, p ess the * (STAR) button on the dial.

On newer 1616 phones:

When you see "* to p og am" on the screen, enter 27238# on the dial

If you miss it, just unplug the phone, wait 10 seconds, then plug it back in and try again.

Page 2

The LCD will say:

Ente PROCPSWD:

#=OK (Note: Avaya changed this area on the newer 1616 phones, you may not need to dial 27238)

Dial 27238 and then press the # (POUND) button on the dial.

The LCD will say:

Phone=0.0.0.0

New=

Enter the IP Address you want the 1616 phone to use on the network that it is plugged into.

Press the # button when done...

The LCD will say:

CallSv=0.0.0.0

New=

Enter the IP Address of the IP Office telephone system. ( SU) OR

If this is a Non-VPN Remote Phone, then enter the Public IP Address that the SU is connected to.

Press the # button when done...

The LCD will say:

Route =0.0.0.0

New=

Enter the IP Address of the Router/Gateway on the network that the 1616 phone is plugged into.

Press the # button when done...

The LCD will say:

Mask=0.0.0.0

New=

Enter the Subnet Mask of the LAN that the 1616 phone is plugged into.

Press the # button when done...

The LCD will say:

FileSv=0.0.0.0

New=

Enter the IP Address of the IP Office telephone system. ( SU) OR

If this is a Non-VPN Remote Phone, then enter the Public IP Address that the SU is connected to.

Press the # button when done...

The LCD will say:

802.1Q=auto

*=change #=ok

Press the # button...

Page 3

The LCD will say:

VLAN ID=0

New=

If you are using a VLAN, enter the VLAN Number.

Press the # button when done...

The LCD will say:

Save new values?

*=no #=yes

Press the # button...

The LCD will say:

New values being saved

The LCD will say:

Resta ting

When you see "* to p og am" on the screen, don't do anything... Just wait...

The phone will esta t seve al times... Don't touch it......

When it says "Saving to flash" it is almost done...

After several restarts......

The LCD will say:

Ente Extension

Ext=

Enter the extension number to be used by the phone.

Press the O button under the LCD

The LCD will say:

Ente the Passwo d

Enter the password for the extension

Press O again

The phone should come start working shortly.

Note:

You may need to place the IP Address of the 1616 phone in the DMZ area of the Router.

Autres manuels pour 1616

Table des matières

Autres manuels Avaya Téléphone IP

Avaya

Avaya 9620 Deskphone Edition Manuel utilisateur

Avaya

Avaya 9640G Manuel utilisateur

Avaya

Avaya DC-Net 4621 SW Manuel utilisateur

Avaya

Avaya one-X 9611G Manuel utilisateur

Avaya

Avaya IP Office 9508 Manuel utilisateur

Avaya

Avaya 9620 Deskphone Edition Manuel utilisateur

Avaya

Avaya 5620 Manuel utilisateur

Avaya

Avaya 1150E Manuel utilisateur

Avaya

Avaya 3730 Manuel utilisateur

Avaya

Avaya one-X 9621G Manuel utilisateur

Avaya

Avaya IP Softphone Manuel utilisateur

Avaya

Avaya 9620 Deskphone Edition Manuel utilisateur

Avaya

Avaya one-X Quick Edition Manuel utilisateur

Avaya

Avaya NULL one-X Manuel utilisateur

Avaya

Avaya IP OFFICE 2420 Manuel utilisateur

Avaya

Avaya IP Office (R3.0) 5620SW + EU24 Manuel utilisateur

Avaya

Avaya IP OFFICE 2410 Manuel utilisateur

Avaya

Avaya IP Office 4601 Manuel utilisateur

Avaya

Avaya 3735 Manuel utilisateur

Avaya

Avaya IP Office 2402 Manuel utilisateur

Avaya

Avaya 5601 Manuel utilisateur

Avaya

Avaya 1692 IP Manuel utilisateur

Avaya

Avaya T3 Classic Manuel utilisateur

Avaya

Avaya 4620SW Manuel utilisateur

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Polycom

Polycom Polycom VVX 600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Cisco

Cisco SPA-500 Series Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur

Nortel

Nortel i2050 Manuel utilisateur

Fiberme

Fiberme FAP260 Series Manuel utilisateur

Meridian

Meridian M5009 Manuel utilisateur