Avanzini DRAGO P1 Fiche technique
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Instruction manual,
use and maintenance
AVANZINI BRUCIATORI s.r.l.
Via G. Battistini, 11
43122 - Parma (PR) - Italy
tel. +39 0521 271344
fax +39 0521 775862
BURNER DRAGO P1
CONTENTS
Instructions, use and maintenance manual
Page 2
Drago P1
FOREWORD
All rights reserved. No part of this instruction manual can be reproduced or transmitted with any electronic or
mechanical means, including photocopies, recording or any other storage and data retrieval system, for any
purpose other than the exclusive personal use of the purchaser, without the express written consent of the
Manufacturer.
The Manufacturer is by no means liable for the consequences of incorrect operations performed by the user.
EDITOR'S NOTE
This documentation is expressly addressed to technicians. Therefore, information that can be easily retrieved by
reading these texts and analysing the drawings may not be explained further.
The Editor is by no means liable for any information and data provided in this manual: all information included
herein has been supplied, controlled and approved by the Manufacturer/Agent during review.
The Editor shall by no means be held responsible for the consequences resulting from the user’s misuse of the
system.
GENERAL REMARKS
Any operational and maintenance instructions, as well as the recommendations described herein, shall be
complied with.
To achieve the best results the Manufacturer recommends performing regular cleaning and maintenance
operations so as to maintain the equipment in the best conditions.
The personnel responsible for the system must be adequately trained on its use and maintenance. They must
also comply with the operating procedures and safety standards indicated in this manual.
In any case, note that the writing company is always available for any clarications or additional information.
INDEX OF THE REVISIONS
REV. NOTES AT
PUBLICATION No. OF LAST PAGE DATE
00 94 05/2019
01
02
03
COPYRIGHT
© 2019
AVANZINI BRUCIATORI s.r.l.
CONTENTS
Instructions, use and maintenance manual
Drago P1
Page 3
TABLE OF CONTENTS
CONTENTS
Instructions, use and maintenance manual
Page 4
Drago P1
TABLE OF CONTENTS
1. IDENTIFICATION OF THE MACHINE ...................................................9
1.1. MANUFACTURER IDENTIFICATION ............................................................................... 9
1.2. MODEL IDENTIFICATION ................................................................................................. 9
1.3. IDENTIFICATION PLATE................................................................................................. 10
1.4. DECLARATION OF CONFORMITY (COPY) .................................................................. 11
1.5. REFERENCE DIRECTIVES............................................................................................. 12
2. GENERAL PRELIMINARY INFORMATION ........................................13
2.1. MANUFACTURER IDENTIFICATION ............................................................................. 13
2.2. SUPPLY AND PRESERVATION ...................................................................................... 13
2.3. UPDATES .......................................................................................................................... 13
2.4. LANGUAGE....................................................................................................................... 14
2.5. MANUAL PAGE STRUCTURE......................................................................................... 15
2.6. OPERATOR QUALIFICATIONS ...................................................................................... 16
2.7. SYMBOLS USED IN THE MANUAL................................................................................ 18
2.8. TERMINOLOGY USED .................................................................................................... 19
2.9. SAFETY PICTOGRAMS................................................................................................... 20
2.10. PERSONAL PROTECTIVE EQUIPMENT....................................................................... 21
2.11. WARRANTY ...................................................................................................................... 22
3. SAFETIES...............................................................................................23
3.1. SAFETY DEVICES ........................................................................................................... 23
3.2. NOISE ................................................................................................................................ 24
3.3. VIBRATIONS..................................................................................................................... 24
3.4. ELECTROMAGNETIC COMPATIBILITY ........................................................................ 24
3.5. RESIDUAL RISKS ............................................................................................................ 24
CONTENTS
Instructions, use and maintenance manual
Drago P1
Page 5
4. DESCRIPTION OF THE MACHINE......................................................27
4.1. INTENDED USE (CORRECT) ......................................................................................... 28
4.1.1. REASONABLY FORESEEABLE IMPROPER USE....................................................................................28
4.2. OBLIGATIONS AND PROHIBITIONS ............................................................................. 29
4.2.1. USER OBLIGATIONS...................................................................................................................................29
4.2.2. OPERATOR OBLIGATIONS.........................................................................................................................29
4.2.3. PROHIBITIONS FOR THE OPERATORS...................................................................................................30
4.3. TECHNICAL DATA............................................................................................................ 31
4.4. MAIN COMPONENTS ...................................................................................................... 32
4.5. WORK CYCLE .................................................................................................................. 34
5. TRANSPORT AND INSTALLATION ....................................................35
5.1. INTRODUCTION............................................................................................................... 35
5.2. PACKAGING ..................................................................................................................... 36
5.3. TRANSPORT AND HANDLING ....................................................................................... 37
5.3.1. INFORMATION ABOUT TRANSPORT AND HANDLING ..........................................................................37
5.3.2. TABLE OF UNITS AND OF WEIGHTS........................................................................................................38
5.4. ARRANGEMENTS TO BE MADE BY THE CUSTOMER............................................... 38
5.5. INSTALLATION ENVIRONMENT .................................................................................... 38
5.5.1. INSTALLATION SITE....................................................................................................................................39
5.5.2. OVEN INSTALLED INDOORS .....................................................................................................................39
5.5.3. OVEN INSTALLED OUTDOORS, WITH OVEN LOADING DOOR IN A SEPARATE ROOM..................40
5.5.4. OVEN INSTALLED OUTDOORS.................................................................................................................41
5.6. OPERATIONS ON OVEN INSTALLATIONS................................................................... 42
5.6.1. HOLE IN THE COOKING TOP.....................................................................................................................42
5.6.2. POSITION FOR TEMPERATURE MEASUREMENT .................................................................................43
5.6.3. HOLE FOR THE TEMPERATURE PROBE.................................................................................................44
5.6.4. FLUE ..............................................................................................................................................................45
5.7. INSTALLING THE BURNER ............................................................................................ 46
5.7.1. FIXING THE FLANGE WITH SLEEVE........................................................................................................46
5.7.2. VERIFY POSITIONING OF THE ELECTRODE .........................................................................................47
CONTENTS
Instructions, use and maintenance manual
Page 6
Drago P1
5.7.3. SECURING THE BURNER ..........................................................................................................................48
5.7.4. SECURING THE CONTROL PANEL WITH KNOB.....................................................................................49
5.7.5. POSITIONING THE TEMPERATURE PROBE - OPTIONAL ....................................................................50
5.8. CONNECTIONS................................................................................................................ 52
5.8.1. GAS PIPE CONNECTION FROM THE BURNER TO THE CONTROL PANEL .......................................54
5.8.2. THERMOCOUPLE CONNECTION FROM THE BURNER TO THE CONTROL PANEL.........................56
5.8.3. COPPER PIPE (PILOT FLAME) CONNECTION FROM THE BURNER TO THE CONTROL PANEL ...58
5.8.4. IGNITION ELECTRODE CONNECTION FROM THE CONTROL PANEL TO THE BURNER................60
5.9. CONNECTIONS................................................................................................................ 62
5.9.1. GAS PIPE CONNECTION FROM THE CONTROL PANEL TO THE DISTRIBUTION SYSTEM............65
5.10. DISMANTLING AND WASTE DISPOSAL....................................................................... 67
6. HOW TO USE .........................................................................................69
6.1. CONTROL PANEL WITH KNOB DRAGO P1.................................................................. 70
6.2. FIRST IGNITION AND ADJUSTMENT............................................................................ 71
6.2.1. FIRST IGNITION WITH THE CONTROLS OF THE CONTROL PANEL...................................................72
6.2.2. HIGH FLAME ADJUSTMENT ......................................................................................................................73
6.2.3. LOW FLAME ADJUSTMENT .......................................................................................................................75
6.2.4. FLAME AIR ADJUSTMENT..........................................................................................................................77
6.2.5. SWITCH-OFF WHILE MAINTAINING THE PILOT FLAME .......................................................................78
6.2.6. SWITCHING OFF THE BURNER ................................................................................................................78
7. MAINTENANCE .....................................................................................79
7.1. INTRODUCTION............................................................................................................... 79
7.2. SAFETY WARNINGS ....................................................................................................... 80
7.3. ROUTINE MAINTENANCE .............................................................................................. 81
7.3.1. ROUTINE MAINTENANCE TABLE..............................................................................................................81
7.3.2. MACHINE CLEANING ..................................................................................................................................82
7.4. SPECIAL MAINTENANCE ............................................................................................... 83
7.5. BURNER GAS CONVERSION ........................................................................................ 84
7.5.1. NOZZLE COMPOSITION ...........................................................................................................................84
7.5.2. NOZZLE REPLACEMENT............................................................................................................................85
CONTENTS
Instructions, use and maintenance manual
Drago P1
Page 7
7.5.3. PILOT FLAME AIR ADJUSTMENT..............................................................................................................87
7.5.4. REPLACEMENT SWITCH-ON BATTERY...................................................................................................88
8. TROUBLESHOOTING...........................................................................89
8.1. INTRODUCTION............................................................................................................... 89
8.2. MANUFACTURER’S ADVICE.......................................................................................... 92
9. ATTACHMENTS .....................................................................................93
9.1. TECHNICAL DATA SHEET .............................................................................................. 93
CONTENTS
Instructions, use and maintenance manual
Page 8
Drago P1
PAGE INTENTIONALLY LEFT BLANK
CHAPTER 1
Instructions, use and maintenance manual
Drago P1
Page 9
1. IDENTIFICATION OF THE MACHINE
1.1. MANUFACTURER IDENTIFICATION
Any request for information or assistance must be sent to:
MANUFACTURER:
AVANZINI BRUCIATORI s.r.l.
Via G. Battistini, 11
43122 Parma (PR) - ITALY
Tel. (+39) 0521-271344 Fax (+39) 0521-775862
email: [email protected]
Website address: www.avanzinibruciatori.it
1.2. MODEL IDENTIFICATION
MACHINE: ON
MODEL: Drago P1
SERIAL NUMBER:
CUSTOMER:
This manual contains condential information and drawings, property of AVANZINI BRUCIATORI s.r.l.
It is forbidden to even partially reproduce the manual without the written authorisation of AVANZINI BRUCIATORI s.r.l.
CHAPTER 1
Instructions, use and maintenance manual
Page 10
Drago P1
1.3. IDENTIFICATION PLATE
For machine identication purposes, a special identication plate was axed to the machine; the identication
data indicated on this plate must be reported to AVANZINI BRUCIATORI s.r.l. every time a service call is
requested or when ordering spare parts:
POS. ELEMENT
1 Model
2 Serial number
3Type of gas
4 Year of manufacture
5 Gas category
6Countries
7Gas pressure
8Power supply
9Electrical power
10 Thermal power
11 CE marking
12 Manufacturer Data
21 3
12
4 10
5
6
11
7
8
9
CAUTION!
IT IS STRICTLY PROHIBITED to remove the identication plate and/or replace it with other
plates. Should the plate be damaged, detached or the manufacturer's seal be removed for
accidental reasons, the customer must inform the Manufacturer.
Autres manuels pour DRAGO P1
1
Table des matières
Autres manuels Avanzini Brûleur
