Automotive Data Solutions FlashLogic FLRSBA Manuel utilisateur

REVISION DATE

20220113

DOCUMENT NUMBER

Patent No. US 8,856,780 CA 2759622

Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certiﬁed Technicians who are

employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior

to beginning installation of an ADS product in a vehicle, it is the Certiﬁed Technician’s responsibility to review the most

current Product Guide, Install Guide and vehicle-speciﬁc notes available in Weblink®. ADS is not responsible for any

damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss

of time, loss of earnings, loss of proﬁt, commercial loss, loss of economic opportunity and the like that may or may not

have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to

suspend any Weblink® account without notice and decline to offer technical support to non-Certiﬁed Technicians, non-

compliant Certiﬁed Technicians or end users.

PRODUCT GUIDE

FLRSBA

Patent No. US 8,856,780 CA 2759622 FLRSBA Product Guide

GETTING STARTED - 1 OF 2

TABLE OF CONTENTS

FLRSBA Product Guide

Module Layout 4

Tach Programming Procedure 5

Module Diagnostics 6-7

Remote Starter Error Codes 8

Alarm Error Codes 9

Module Reset Procedure 10

Installation Checklist 11-12

FLRSBA + CODE ALARM

Compatible Accessories 13-14

Remote Programming Procedure 15

Valet Mode Programming Procedure 16-17

FLRSBA + CRIMESTOPPER

Compatible Accessories 18-19

Remote Programming Procedure 20

Valet Mode Programming Procedure 21

FLRSBA + DIRECTED

Compatible Accessories 22-23

Remote Programming Procedure 24

Valet Mode Programming Procedure 25

WELCOME

Congratulations on the purchase of your FLRSBA

solution. You are now a few simple steps away

from enjoying your new remote starter unit with

enhanced features.

Before starting your installation, please ensure

that your FLRSBA module is programmed with

the correct ﬁrmware for your vehicle and that you

carefully review the install guide.

PAGE 2 OF 45

• 20220113

Patent No. US 8,856,780 CA 2759622 FLRSBA Product Guide

GETTING STARTED - 2 OF 2

NEED HELP?

1 800 225-6074

www.voxxelectronics.com/care/?p=contactus

www.ﬂashlogic.com/support

www.facebook.com/audiovox

TABLE OF CONTENTS

FLRSBA + OMEGALINK

Compatible Accessories 26-27

Remote Programming Procedure 28

Valet Mode Programming Procedure 29

FLRSBA + PRESTIGE

Compatible Accessories 30-31

Remote Programming Procedure 32

Valet Mode Programming Procedure 33-37

FLRSBA + PURSUIT

Compatible Accessories 38-39

Remote Programming Procedure 40

Valet Mode Programming Procedure 41-45

PAGE 3 OF 45

• 20220113

Patent No. US 8,856,780 CA 2759622 FLRSBA Product Guide

MODULE CONNECTORS

M9 (CODE ALARM RF) - 4 PIN RED

M11 (TELEMATIC) - 4 PIN BLUE

PROGRAMMING BUTTON

M7 (PRESTIGE/PURSUIT RF) - 6 PIN BLACK

LED 1 (BYPASS)

LED 2 (RS)

M10 (RF PORT/WEBLINK) - 4 PIN BLACK

M12 (NC) - 4 PIN YELLOW

M13 (ALARM SENSOR) - 4 PIN WHITE

M8 (CODE ALARM RF) - 5 PIN BLACK

MODULE

01 GREEN•BLACK DOT - LOCK (-) OUTPUT

02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT

03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT

04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT

05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT

06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT

07 BROWN•BLACK DOT - SIREN (+) OUTPUT

08 WHITE/PURPLE•BLACK DOT - POC 1 - 2ND UNLOCK OTHER DOORS (-) OUTPUT

09 PURPLE/BLACK•BLACK DOT - POC 2 - RAP SHUTDOWN (-) OUTPUT

10 WHITE/BLACK•BLACK DOT - POC 3 - HORN (-) OUTPUT

11 BROWN/BLACK•BLACK DOT - POC 4 - STARTER KILL (-) OUTPUT

12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT

01 BROWN•SILVER DOT - BRAKE (+) INPUT

02 BLACK/WHITE•SILVER DOT - E-BRAKE (-) INPUT

03 PURPLE•SILVER DOT - DOOR (+) INPUT

04 GREEN•SILVER DOT - DOOR (-) INPUT

05 PURPLE/WHITE•SILVER DOT - TACH (-) INPUT

06 WHITE/BLUE•SILVER DOT - X-TRIGGER (-) INPUT

07 GRAY•SILVER DOT - HOOD (-) INPUT

08 BLUE•SILVER DOT - TRUNK (-) INPUT

09 GRAY/BLACK•SILVER DOT - GLOW PLUG (+) INPUT

10 TAN•SILVER DOT - EXT ALARM SENSOR (-) INPUT

FUNCTIONS DEFINED BY FIRMWARE

M3 - 10 PIN WHITE

M2 - 12 PIN BLACK

M5 - 6 PIN BLUE

M4 - 20 PIN BLACK

M1 - 8 PIN BLACK

M6 - 6 PIN BLACK

AUTOMATIC

TRANSMISSION

CUT LOOP

M1 01 ORANGE - ACCESSORY (+)

01 ORANGE - ACCESSORY (+)

02 RED - POWER (30A)

03 PURPLE - STARTER (+)

04 PINK/WHITE - PROG. RELAY #4 - IGNITION 2 (+) (DEFAULT)

05 PINK - IGNITION (+)

07 RED - POWER (30A)

08 BLACK - GROUND

06 WHITE - PROG. RELAY #5 (10A) - PARKING LIGHTS (+) (DEFAULT)

CONNECTOR PINOUT

MODULE LAYOUT - 1 OF 1

PAGE 4 OF 45

• 20220113

Patent No. US 8,856,780 CA 2759622 FLRSBA Product Guide

ENGINE

START

STOP

OFF ACC ON STARTSTART

START

TACH PROGRAMMING PROCEDURE - 1 OF 1

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming

button. (OR if the remotes are already

programmed to the vehicle, press and hold the

start button of the remote for 2.5 seconds.)

Wait, LED 2 will ﬂash GREEN. (See the Module

Diagnostics page)

Release the brake pedal.

Module Programming Procedure completed.

PAGE 5 OF 45

• 20220113

Patent No. US 8,856,780 CA 2759622 FLRSBA Product Guide

MODULE DIAGNOSTICS - 1 OF 2

MODULE STATUS DURING:

LED 2* LED 1** LED STATUS DIAGNOSTIC

MODULE PROGRAMMING

•Flashing RED Missing/wrong information from ﬁrmware or vehicle.

See ﬁrmware speciﬁc diagnostics, or contact technical support.

•Solid RED Module waiting for more vehicle information. Programming incomplete.

•Flashing GREEN Additional steps required to complete programming. Refer to install guide.

•Solid GREEN then OFF Module programming completed successfully.

oOFF No activity or module already programmed.

•1 RED ﬂash No ﬁrmware on module. Connect to Weblink and ﬂash device.

•2 ORANGE ﬂashes Contact technical support.

•3 ORANGE ﬂashes Module programming not completed.

•4 ORANGE ﬂashes Contact technical support.

•7 ORANGE ﬂashes Contact technical support.

•8 ORANGE ﬂashes Loop not cut. Ensure loop is cut for automatic transmission. Reset and re-learn.

•9 ORANGE ﬂashes Loop not cut. Ensure loop is cut for automatic transmission. Reset and re-learn.

•10 ORANGE ﬂashes Boot loader update failed. Contact technical support.

•11 ORANGE ﬂashes T-harness detection does not match install type selection in Weblink.

TACH PROGRAMMING

•Solid RED Tach learn in progress.

•1 GREEN ﬂash Tach signal programmed in analog.

•2 GREEN ﬂashes Tach signal programmed in data.

•3 RED ﬂashes No tach signal detected

•4 RED ﬂashes System is in valet mode. Turn off valet mode to program tach.

•6 RED ﬂashes Engine sensing set for ‘assumed start’. No tach programming required.

•7 ORANGE ﬂashes Engine sensing not conﬁgured properly. Contact technical support.

* LED 2 (RS) displays generic diagnostic codes speciﬁc to the remote start module. Orange LED ﬂashes may appear red.

** LED 1 (Bypass) displays diagnostic codes speciﬁc to the ﬁrmware loaded on the module.

Visit the programming diagnostics page for more information.

PAGE 6 OF 45

• 20220113

Patent No. US 8,856,780 CA 2759622 FLRSBA Product Guide

MODULE DIAGNOSTICS - 2 OF 2

MODULE STATUS DURING:

LED 2* LED 1** LED STATUS DIAGNOSTIC

REMOTE START SEQUENCE

•Flashing rapid RED Remote start shutdown sequence.

•Flashing slow RED Remote start shutdown error code. Contact technical support.

•Solid RED Remote start crank delay.

•Flashing rapid GREEN Remote start cycle in progress. Working correctly.

•1 GREEN ﬂash Remote start initiated successfully.

•3 GREEN ﬂashes Idle mode cycle in progress.

•4 GREEN ﬂashes Turbo mode cycle in progress.

•Flashing GREEN Remote start cycle in progress. Displays vehicle platform during runtime.

•Rapid GREEN ﬂashing Secure takeover initiated. Waiting to complete takeover after brake press.

TRANSMITTER PROGRAMMING

•Solid RED Remote programming in progress, waiting for remote pairing.

•1 GREEN ﬂash Remote programmed.

•4 RED ﬂashes Shutdown remote starter before attempting remote programming.

•5 RED ﬂashes Engine must be off before attempting remote programming.

•6 RED ﬂashes System must be unlocked/disarmed before attempting remote programming.

•7 RED ﬂashes Module must be learned to the vehicle before attempting remote programming.

* LED 2 (RS) displays generic diagnostic codes speciﬁc to the remote start module. Orange LED ﬂashes may appear red.

** LED 1 (Bypass) displays diagnostic codes speciﬁc to the ﬁrmware loaded on the module.

Visit the programming diagnostics page for more information.

PAGE 7 OF 45

• 20220113

Patent No. US 8,856,780 CA 2759622 FLRSBA Product Guide

REMOTE STARTER ERROR CODES - 1 OF 1

REMOTE STARTER ERROR CODES: NOTES PARKING LIGHT FLASHES DIAGNOSTIC

I WARNING: The following applies only when the parking lights are

connected and supported by the system.

3 + 1 Tach is not programmed OR engine is already running.

3 + 2 Key is in ignition ON position.

3 + 3 Door is open.

II After a remote starter failure, the parking lights will ﬂ ash three [3x]

times followed by the error code. See table.

3 + 4 Trunk is open.

3 + 5 Foot brake is ON.

3 + 6 Hood is open.

3 + 7 Loop is not cut.

3 + 8 No tach detected.

3 + 9 Vehicle movement detected (VSS).

3 + 10 System is in Valet Mode.

3 + 11 CAN communication failure

3 + 12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.

3 + 13 Bypass problem.

3 + 14 Idle mode or takeover is not available on this vehicle.

3 + 15 Overheat protection.

REMOTE STARTER SHUTDOWN ERROR CODES: NOTES PARKING LIGHT FLASHES DIAGNOSTIC

I WARNING: The following applies only when the parking lights are

connected and supported by the system.

4 + 1 Engine tach signal was lost.

4 + 2 Emergency brake signal was lost.

4 + 3 Foot brake ON detected.

II If the engine shuts down after a remote starter sequence

use the query command from a compatible aftermarket

remote to display the shutdown error code. The parking lights will

ﬂash four [4x] times followed by the error code. See table.

4 + 4 Hood open detected.

4 + 5 Tach over rev detected.

4 + 6 Glow plug timeout error.

4 + 7 Vehicle movement detected (VSS).

4 + 8 Check engine light ON.

4 + 9 Low fuel level.

4 + 10 Open door detected.

4 + 11 CAN communication failure during RS sequence.

4 + 12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.

4 + 13 Bypass problem.

4 + 14 Idle mode or takeover is not available on this vehicle.

4 + 15 Overheat protection.

PAGE 8 OF 45

• 20220113

Patent No. US 8,856,780 CA 2759622 FLRSBA Product Guide

ALARM ERROR CODES - 1 OF 1

ALARM ERROR CODES: NOTES PARKING LIGHT FLASHES ANTENNA LED FLASHES DIAGNOSTIC

I WARNING: The following applies only when the parking lights are

connected and supported by the system.

5 + 1 1 Shock sensor triggered

5 + 2 2 Door open

5 + 3 3 Trunk open

II If the alarm has been triggered, the parking lights will ﬂ ash

ﬁ ve [5x] times followed by the alarm activation event.

5 + 4 4 Hood open

5 + 5 5 Zone 2 input triggered

5 + 6 6 Foot brake ON

III The alarm event code is also displayed in a repeating pattern

on the antenna’s LED when the alarm is triggered, until unlock

is received.

5 + 7 7 Ignition ON

5 + 8 8 Motion detected

5 + 9 9 Tilt detected

5 + 10 10 Warn away input triggered

PAGE 9 OF 45

• 20220113

Patent No. US 8,856,780 CA 2759622 FLRSBA Product Guide

MODULE RESET PROCEDURE - 1 OF 1

The following procedure resets the module

programming to the vehicle. It does not reset

any settings conﬁgured online.

Disconnect all connectors from module except

the M1 BLACK 8-pin connector and the M4

BLACK 20-pin connector.

Disconnect the M1 BLACK 8-pin connector

and the M4 BLACK 20-pin connector.

PRESS AND HOLD the module’s programming

button while connecting the M1 BLACK

8-pin connector and the M4 BLACK 20-pin

connector.

Wait, LED 1 will ﬂash RED. RELEASE

programming button.

LED 1 will turn RED for 2 seconds.

Module RESET completed.

Reconnect all connectors.

Repeat programming procedure.

Failure to follow procedure may result with a

DTC or a CHECK ENGINE error message.

PAGE 10 OF 45

• 20220113

Table des matières

Autres manuels Automotive Data Solutions Démarreur à distance

Automotive Data Solutions

Automotive Data Solutions TR2410A Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions TR1150AT Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions iDatastart TR2450A Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions OBTR1151A Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions TR3450A Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions AKX-CH7-2WSS Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions iDatastart TR2450AE Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions TR2450AR Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions OBTR2352A Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions TR2550A Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions iDatastart TR2350ACR Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions TR4450A Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions TR2310A Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions iDatastart TR3450AF Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions TR1150AR Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions iDatastart Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions AKX Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions TR2350AK Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions TR1150A Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions TR2310AC Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions iDatastart TR3450AE Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions TR2350ACT Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions 99997 2450RF Manuel utilisateur

Automotive Data Solutions

Automotive Data Solutions TR2310ACT Manuel utilisateur

Manuels Démarreur à distance populaires d'autres marques

AstroStart

AstroStart 803U Manuel utilisateur

Durite

Durite 0-649-20 Manuel

EINHELL

EINHELL BT-PS 1000 Manuel

Linear

Linear ACCESS AK-21 Caractéristiques techniques

Soundstream

Soundstream TARANTULA RS.2 Manuel utilisateur

Jaycar Electronics

Jaycar Electronics MB3752 Manuel utilisateur

Ultra Start

Ultra Start 72 Series Manuel utilisateur

ADS

ADS FLASHLOGIC FLRSVW1 Manuel utilisateur

Selecta

Selecta JS012 Manuel utilisateur

Black Widow Security

Black Widow Security BW RAS 400 Manuel utilisateur

Vector

Vector Power City DK080706 Supplément

Code Alarm

Code Alarm CA-535 Manuel utilisateur

Ozito

Ozito OJS-800 Manuel utilisateur

Profi-Partner

Profi-Partner 46387 Manuel utilisateur

EZ STARTER

EZ STARTER EZ-45 Manuel utilisateur

Viper

Viper 4204 Manuel utilisateur

Essex Electronics

Essex Electronics KE-1701 Manuel utilisateur

EINHELL

EINHELL EGS 3600 Manuel