Autoenterprise Single Manuel utilisateur
«Single»
Instruction manual
INSTRUCTION MANUAL «SINGLE»
2
© Copyright
This documentation with all illustrations is the intellectual property of Autoenterprise. All
documentation is provided to the user for personal use only. This documentation may not
be reproduced or provided to others without our written permission. Any violation of the
law will be prosecuted.
Autoenterprise cannot be held liable for any direct or indirect damages
resulting from the use or operation of the electrical circuits of the
equipment or software described herein. The appliance should only be
before using the product. In addition, Autoenterprise reserves the right to
change any product described here without prior notice.
INSTRUCTION MANUAL «SINGLE»
3
TABLE OF CONTENTS
1. Introduction..........................................................................................4
2. Key information.......................................................................................4
2.1 Information about the manual..........................................................................4
2.2 Warning signs.................................................................................................4
2.3 Liability and warranty......................................................................................5
2.4 Disposal information .......................................................................................6
2.5 Manufacturer’s label........................................................................................6
3. Application area, station specications ..........................................................6
3.1 Application area..............................................................................................7
3.4 General electrical safety information................................................................9
4. Dimensions,connectivity..........................................................................10
4.1 Charger’s dimensions and parameters...............................................................10
4.2 Transportation...............................................................................................12
4.3 Installation....................................................................................................13
4.4 Storage.........................................................................................................14
5. Maintenance..........................................................................................15
INSTRUCTION MANUAL «SINGLE»
4
1. INTRODUCTION
SINGLE – is a high quality charging station (hereinafter referred to as «the complex»), which
the modern components combined with the microcontroller signal processing technology,
This, together with the software and accessible interfaces, provides a exible and productive
solution for electric vehicle charging that meets the highest quality standards.
The product is designed to control and convert the energy consumed from a three-phase
battery.
The product is equipped with an intelligent microcontroller control system and
communication devices that allow for the exchange of information with the electric vehicle
and set the value of the charge current and voltage, according to the needs of the electric
vehicle in real time.
2. KEY INFORMATION
2.1 INFORMATION ABOUT THE MANUAL
This manual describes how to operate the charger properly and safely. Be sure to follow
the safety instructions given here, as well as any local safety regulations and general safety
instructions.
Before you put the charger into use, make sure that the instructions, the «Safety» paragraph
in particular, have been read through and understood completely. This manual is an integral
part of the station and and should therefore be kept in its immediate vicinity.
2.2 WARNING SYMBOLS
Important safety instructions in this manual are marked with symbols. These safety
instructions must be strictly adhered to. Always pay attention to them and follow the safety
instructions to avoid accidents, personal injury or material damage.
WARNING!
This symbol indicates instructions that must be followed to avoid injury,
trauma or death.
INSTRUCTION MANUAL «SINGLE»
5
WARNING!
This symbol indicates instructions which, if not followed, may result in
material damage, functional faults and/or machine breakdowns.
WARNING!
Danger - electrical current
This symbol alerts you to potentially dangerous situations involving
electric current. Failure to follow the safety instructions increases the risk
of serious injury or death. Caution should be exercised, especially during
maintenance and repairs.
ATTENTION!
This symbol indicates tips and information that should be adhered to in
2.3 LIABILITY AND WARRANTY
operating instructions have been carefully compiled to the current state of the art at the
time of publication. We are not liable for errors, missing information or any subsequent
damages or consequential damages.
Strict adherence to the safety procedures described in these operating instructions and
special care when using the equipment are essential to prevent and reduce the likelihood of
injury or damage to the equipment. The manufacturer is not responsible for damage and/or
malfunctions caused by non-compliance with the instructions in this manual.
Additionally, the manufacturer will not be liable for any personal injury or material damage,
or loss of business information resulting from the use of the equipment described in this
manual.
Any software included in this equipment must only be used for the purposes for which it has
been provided to the User by the Autoenterprise for which it is strictly prohibited to make
any changes, conversions or copies (except for any necessary backups).
AutoEnterprise reserves the right to update any information, illustrations, sheets,
prior notice.
INSTRUCTION MANUAL «SINGLE»
6
2.4 DISPOSAL INFORMATION
Do not dispose of the charging complex together with household
waste!
Electronic devices must be disposed of in accordance with the local
directives for the disposal of electronic and electrical waste. If you have
any further questions, please contact your supplier.
Use suitable tools if you need to disassemble the system. All individual parts must be sorted
by different types of material and disposed of in accordance with the regional guidelines for
the disposal of electronic and electrical waste.
2.5 MANUFACTURER’S LABEL
The marking on the charging complex is located on the GSM modem inside the complex on
the side of the control panel (side 1) and consists of alphabetic and digital symbols (example:
M123456).
This information is important for setting up, troubleshooting and ordering
spare parts for the station.
INSTRUCTION MANUAL «SINGLE»
7
3. APPLICATION AREA, STATION SPECIFICATIONS
3.1 APPLICATION AREA
The charger is designed exclusively for charging electric vehicles.
For information about the materials, please contact Autoenterprise sales
representative or contact the Autoenterprise technical support team
The following sections should also be followed as part of the intended use:
•Only charge compatible electric vehicles.
•Failure to follow the instructions for use, maintenance and repair described in these
operating instructions excludes any liability on the part of the manufacturer in the event of a
defect.
•The system must only be operated, maintained and repaired by personnel familiar with the
intended use and hazards!
•Carry out maintenance and repairs in accordance with the specifications in these operating
instructions.
•The unit may only be operated with equipment and spare parts supplied or listed in the
spare parts and consumables lists.
•Using of the system in other areas is contrary to its intended purpose. The manufacturer is
not responsible for any damage to the equipment resulting from such use. The user is solely
responsible for any damage resulting from improper use of the system.
INSTRUCTION MANUAL «SINGLE»
8
Type of installation Wall mount / Pedestal mount (optional)
Online device monitoring Yes
Current adjustment Yes
Possibility to manage rates of the station Yes
Single body version Yes
Digital display to indicate the amount of
electricity consumed Yes
User interface management Menu functions are managed via the mobile
app
Enclosure material Steel with anticorrosive coating
Mechanical protection IK10
Case protection class IP65
Power cable entry from below Yes
Weight, kg 12
Ambient temperature -50°C to +50°C
3.2 CHARGING STATION FEATURES
The gear control system is powered from the mains via an additional circuit breaker.
The time of initial readiness of the charging station after switching on the voltage is not
more than 1 minute.
The charging station is designed for continuous operation.
Switching the operation modes of the charger is carried out under the control of a
communication microcontroller providing communication with the car.
3.3 EQUIPMENT MODIFICATIONS
It is strictly forbidden to change, modify or alter the machine in any way without the explicit
consent of the manufacturer.
All signs, stickers and pictograms attached to the machine must be visible, legible and cannot
be removed. Signs, labels or pictograms that have become damaged or illegible must be
replaced immediately. Please contact AutoEnterprise to coordinate such questions.
INSTRUCTION MANUAL «SINGLE»
9
3.4 GENERAL ELECTRICAL SAFETY INFORMATION
Follow the safety instructions to avoid injury and material damage when working with the
device.
Failure to follow these instructions can result in injury and damage to or
destruction of the product.
Ignoring the safety recommendations and instructions in this manual will relieve
the manufacturer and his authorized representatives of all liability and claims.
the input circuits with external disconnecting devices and unplugging the charger from the
electric vehicle. Please note that if there is any voltage is present at the mains input or at the
other terminals of the product, life-threatening voltages may also be present due to internal
connections.
INSTRUCTION MANUAL «SINGLE»
10
4. DIMENSIONS, CONNECTIVITY
4.1 CHARGER’S DIMENSIONS AND PARAMETERS
The charging station is structurally designed for wall mounting and has the following
control and management bodies:
• The charging station in the casing
• The «Type 1» connector or «Type 2» connector - 1 pc.
• Information display - 1 pc
Autres manuels pour Single
1
Table des matières
Autres manuels Autoenterprise Accessoires automobiles
