Autobase ATP15 Manuel utilisateur
Just Touch
autobaseTouch
Intelligent
Touch Panel
Computer
ATP15/15P/17/19
User Manual
http://www.autobase.biz
1201, Biz Center, SKnTechno Park, Sangdaewon-dong,
Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Phone : +82.31.776.0800 / Fax : +82.31.776.0802
http://www.autobase.biz
autobaseTouch
ATP15 / ATP17 / ATP19
This user manual and all about copyright of Autobase ATP series panel computer
© Autobase, Inc. All rights reserved
< Notice >
Information in this document is subject to change without prior notice.
Printed, November 26, 2012
Contents
1. ATP Configurations··························································5
1.1 ATP Hardware Specifications ············································ 5
1.2 Part Names and Description·············································· 6
1.3 ATP15 Dimensions and Panel Cut-out································· 7
1.4 ATP15P Dimensions and Panel Cut-out······························· 8
1.5 ATP17 Dimensions and Panel Cut-out································· 9
1.6 ATP19 Dimensions and Panel Cut-out································10
2. Serial Communication Port··············································12
2.1 Serial Communication port ···············································12
2.1.1 RS-232C dedicated port ··········································12
2.2 RS-232C/RS-422 Mode Settings·······································13
2.2.1 RS-232C Mode······················································13
2.2.2 RS-422 Mode ························································14
3. Automated System Recovery···········································16
3.1 System Recovery···························································16
3.1.1 Initialization state recovery ·······································16
3.1.2 Restore point update···············································17
4. Manual System Recovery················································19
4.1 Device Driver Setup························································19
4.1.1 Mainboard chipset driver setup··································19
4.1.2 Audio driver setup···················································23
4.1.3 Graphic driver setup················································26
4.1.4 Touch screen driver setup········································29
4.1.5 Ethernet driver setup···············································32
4.2 Programs for Autobase Touch Pro Pack ·····························34
4.2.1 AutoBase Touch SCADA Program installation··············34
5
1. ATP Configurations
1.1 ATP Hardware Specifications
Models
ATP15 ATP15P ATP17 ATP19
Display 15” XGA
(1024 * 768)
15” XGA
(1024 * 768)
17” SXGA
(1280 * 1024)
19” SXGA
(1280 * 1024)
CPU Intel ATOM N270 1.6GHz (FSB 533/667MHz)
Touch Controller Pen Mount 5-wire USB controller
Mainboard Chipset Intel 945GSE and ICH7-M
Main Memory DDR2 2GB (667MHz/PC5300)
Storage SSD 60GB(Max Read:500MB/s Write:400MB/s)
or HDD 500G(SATA2 7200RPM)
VGA Intel GMA 950 Graphics Dual Channel 128MB(LVDS/Analog)
Serial/Printer Port 3 RS-232C, 1 RS232C/422/485 Option, 1 Printer Port
USB 4 USB Ports
Ethernet Port Dual Gigabit Ethernet (10/100/1000Mbits/s) LAN Ports
Kyeboard/Mouse PS2
CD-ROM -
OS Windows XP Embedded Standard
Utility Rescue (Recovery Tools Included)
Voltage AC 115 ~230V
Power 45W
Weight 5.85 kg 5.91 kg 7.69 kg 8.91 kg
Waterproof X Front X X
Service life of LCD
backlight 40,000h or more
<Table 1-1> AUTOBASE Touch hardware specifications
6
1.2 Part Names and Description
<Figure 1-1> Input/output ports ofATP series
❶AC IN : Power input connector
❷Power ON/OFF : Power On/OFF switch
❸Audio OUT : Stereo speaker output port
❹MIC IN : Microphone input port
❺LAN 1 : 10/100/1000 Base-T Ethernet port
❻LAN 2 : 10/100/1000 Base-T Ethernet port
❼USB : USB 4 ports
❽VGA : External D-SUB VGA monitor output port
❾COM 1 : RS-232C input/output ports
❿COM 2 : RS-232C/422 input/output ports (Factory setting: RS-232C)
⓫Key Board : PS/2 Keyboard port
⓬Mouse : PS/2 PS/2 mouse port
⓭COM 3 : RS-232C input/output port
⓮COM 4 : RS-232C input/output port
7
1.3 ATP15 Dimensions and Panel Cut-out
<Figure 1-2>ATP15 dimensions(unit : mm)
<Figure 1-3>ATP15 panel cut-out dimensions(unit : mm)
8
1.4 ATP15P Dimensions and Panel Cut-out
<Figure 1-4> ATP15P dimensions(unit:mm)
<Figure 1-5>ATP15P panel cut-out dimensions(unit : mm)
9
1.5 ATP17 Dimensions and Panel Cut-out
<Figure 1-6>ATP17 dimensions(unit : mm)
<Figure 1-7> ATP17 panel cut-out dimensions(unit : mm)
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Autobase Écran tactile
Manuels Écran tactile populaires d'autres marques
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manuel utilisateur
YASKAWA
YASKAWA TP 610C Manuel utilisateur
B&R
B&R Power Panel C Series Manuel utilisateur
Beijer Electronics
Beijer Electronics X2 control Manuel utilisateur
AXIOMTEK
AXIOMTEK GOT321W-521 Manuel utilisateur
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manuel utilisateur
