AUTLED LC-004-304 Manuel utilisateur

LED DALI Bluethooth Interface - User Manual

Item no: LC-004-304

1. Product Descripton

The DALI Bluetooth module are an interface device between IOS or Android Bluetooth

Low Energy capable mobile devices and DALI lighting systems. Apps are available for the menti-

oned operating systems.The function behind the layouts can be conﬁgured using the DALI-Cock-

pit software tool. It is supplied directly by the DALIline.

3. Description

2. Speciﬁcation

1. Control of DALI systems via mobile devices (Android or iOS mobiel devices)

2. all Bluetooth modules are displayed in the reception are in the app

3. conﬁgurable up to 32 layouts

4. 5 predeﬁned standard designs such as for switching and dimming, as well as for the control of

color and color temperature

5. Access code by pin-code us possible

6. Conﬁguration of DALI Bluetooth module via DALI Cockpit and DALI USB Interface

7. freely positionable keys can be assigned functions

8. Ability to send DALI commands or command sequences to individual addresses (1-64), groups

(1-16) , and broadcast

9. Muli master operation, several modules can be installed per DALI circuit

10. The supply of the module is carried out directly via the DALI Line

Power Supply via DALI-Bus

typ. current consumption 4mA

Layout selectable

Output DALI

max. wire cross section 1,5 mm2

Dimensions (L x W x H) in mm 59 x 33 x 15 mm

weight 13g

4. Dimensions

5. User Manual

5.1. Function

The DALI Bluetooth module are an interface device between IOS or Android Bluetooth

Low Energy capable mobile devices and DALI lighting systems. Apps are available for the menti-

oned operating systems.

With the help of the App the DALI-system can be controlled using several layouts, but there can

be connected only one mobile device at the same time.

The function behind the layouts can be conﬁgured using the DALI-Cockpit software tool. For a

module up to 32 layouts and a maximum of 12 buttons per layout are supported (ﬁrmware 4.0

and higher). Furthermore 5 standard designs are availabe. They can be used either as

predeﬁned or customized.

5.2. DALI-Touch App

The „DALI Touch“-App is available for IOS and android and can be downloaded from:

AppStore: https://itunes.apple.com/us/app/dalitouch/id994496429?ls=1&mt=8

Google Play: https://play.google.com/store/apps/details?id=com.lunatone.dalitouch

After app installation has been ﬁnished and the Bluetooth-module has been connected to

the DALI line (see chapter 4 - installation), the app is already connected to the module. In the

“app-overview” all Bluetooth modules located within the range are shown with their currently

“active layout” (see ﬁgure 1).

If one of the modules is selected in the “app-overview”, the layout comes up (ﬁgure 2) and the

DALI circuit can already be controlled by the functions deﬁned in the layout.

On the right bottom of the layout the layout number is shown. If any changes on the function are

required, then this number indicates the layout which has to be adapted in the DALI-Cockpit.

The pics used for the different layouts are managed in the “layout-library”. It can be accessed

via the ”Manage Layouts“ in the main menu (“app overview”). In “Standard-Layouts“ (ﬁgure 3)

the predeﬁned layouts (number 1-5) are listed whereas in the „Customized-Layouts“ (ﬁgure 4)

for each number from 100-255 (range for customized layouts) a pic from the memory of your

mobile device can be assigned. Already assigned pics can at any time be removed, changed or

assigned to another layout by changing the number (ﬁgure 5 and ﬁgure 6).

Finally the used pics can be sent per email e.g. for using exactly the same pic in the

DALI-Cockpit conﬁg tool when conﬁguring the corresponding layout.

Menu - > Manage Layouts

layout number

1: „app-overview“ located modules 2: „active layout“

Manage Layouts:

add a pic as

customized layout

3: „layout-library“ - standard 4: „layout-library“ - customized

5: Customized Layout 100 6: Edit option

additional hints:

7: searching for connection 8: coordinates of lasst pressing action

Layout 100 added:

9: unknown layout (no pic assigned) 10: layout menu

The search for a bluetooth connection is indicated by the symbol shown in ﬁgure 7.

After a pressing action the coordinates at which the action has been located is shown (in% rela-

tive to the screen size) for about 3 seconds on the bottom right (see ﬁgure 8). This information is

quiet helpful for the deﬁnition of button coordinates in the DALI-Cockpit.

If the case occurs that a layout gets active, for which no pic has been assigned (like it is the case

with layout 101 in ﬁgure 9), a big question mark will indicate this behaviour. The pic can then be

assigned to Layout 101 either via “Manage Layouts” as already mentioned above or using menu

function ”Set User Image“ (see layout menu ﬁgure 10).

The difference between these methods is as follows: The app has one “layout-library” in use,

that means that each Bluetooth module that connects to the app uses the same layout-library

and as a result the same pics for the same layout numbers. In difference a “User image” is

only assigned to the currently active layout of the connected device, the pic deﬁned in the layout

manager is overruled in this case.

Besides the deﬁnition of a user image the panel name can be set as well as the proximitiy notﬁ-

cation can be enabled/disabled in the layout menu (see ﬁgure 10).

5.3. DALI-Cockpit - Layout Conﬁguration

The DALI Cockpit is the conﬁguration tool for DALI systems and it is available as free

download. Please check that you have the last recent version in use, otherwise it cannot ensure

that all functions and devices are supported (for DALI BT-modules please use DALI-Cockpit

Version 1.25 and higher).

With the help of the DALI-Cockpit DALI control gear and control devices can be addressed and

conﬁgured. All devices that are connected to the DALI-line and have been addressed are listed in

the component tree (ﬁgure 11).

11: Component-Tree

DALI Touch BT module

DALI Bluetooth module

Selecting a device in the component tree will open the corresponding conﬁguration site.

5.3.1. General Settings

The conﬁguration site of the DALI Bluetooth modules is separated in tabs, one for each layout

and a general settings tab.

On the left there general functions like the info-ﬁeld about the number of layouts and the but-

tons for adding/removing layouts and assigning/removing pics to layouts are located. The touch-

panel-type offers an additional button for calibration of the physical touchpanel (see ﬁgure 12).

The header, marked as device info, provides information about the device (like manufacturer,

article number, serial number and ﬁrmware version).

device info:

type, manufacturer, etc.

ﬁrmware version

update function

Add Layout:

Standard layout

Empty layout

Copy of already existing layouts

General Settings:

pincode (access protection)

proximity event

power-up behaviour

touchpanel LED

General Settings:

Enable PIN: access protection by a 4 digit pin code. Once activated the app of a connected mobile

device will ask for a valid pin.

proximity event: the proximity function offers the possibility to set a predeﬁned action if a mobile

device comes into the range of the bluetooth connection (e.g. for automatic switch on the light).

The proximity function has to be enabled on the mobile device as well (function is supported up

from Bluetooth version 1.0 and ﬁrmware version 4.3).

power-up: behaviour after a power brake has occured

5.3.2. Layout Settings

Once a layout is selected addional options are available in the menu on the left. The selected

layout can be deleted and the image that should be used for the layout can be selected. This

is useful for deﬁning the coordinates of the buttons. The buttons deﬁned in the layout can be

superimposed or supressed dependent on the „Show button hints“ checkbox.

13: DALI Bluetooth Module

Hint: A Start-Layout (DALI Bluetooth, „Use at StartUp“) must be available at any time.

This layout cannot be deleted. If the currently active layout has been deleted accidentally, a pow-

er cycle restarts the module in a deﬁned state using the startup-layout as active layout.

Layout Number:

The number of the layout can be changed in the ﬁeld „Edit Layout Number“ (100…255), the num-

ber is used by the module to tell the app which layout (pic) should be shown.

Furthermore the layout numbers are used for the link-function. Assigning a link to another

layout to a button offers the possibility to switch between several layouts and generate menu

structures and so on.

Buttons:

Each layout supports up to 12 buttons. The position of each button is deﬁned by its coordinates,

in detail by its centre as well as its width and height. The coordinates are entered in % relative to

the layout size (0/0 is top left, 100/100 is bottom right – see ﬁgure 8 and ﬁgure 15).

The coordinates shown in the app when touching the layout are very helpful for deﬁning the

centre of a button.

If the checkbox „Show button hints“ is selected, the areas of the deﬁned buttons will be

superimposed to the background pic. The currently active button is highlighted.

Button areas may overlap, in this case the button with the higher number has higher priority

(like in ﬁg 15 at which button 7 has higher priority than button 6).

Visualisation of Buttons Power Up Layout Number (App)

Button Coordinates (Centre,

Width, Height)

Add /

Remove

Button

Tabs for

Buttons

15: Layout Page Settings

Function:

Each button a function can be assigned to. As function 2 different types are available:

· a link to another layout, this allows switching between different layouts and thus offers the

generation of structures with submenus and so on

Function: Link

selectable only if

other layouts are

available

16: Link-Function

· a DALI command, this option includes several possibilities to send DALI commands on the

DALI-line

Detailed DALI Settings:

Effective range

Switching function

DALI command

DALI-Function:

Adress(es) +

Commands

17: DALI-Function

5.4. Installation

The DALI-Bluetooth module is connected directly to the DALI-line. It is supplied directly by the

DALI line. The connection to the DALI-line is polarity-free.

The DALI Touch BT can be mounted on a wallbox, the DALI Bluetooth module can be inserted

inside. Connecting wire cross section is 1,5mm2 (Interface only type).

The DALI-Bluetooth modules are mutlimaster capable, that means that several modules can be

connected to the same DALI-line.

The DALI-Bluetooth module does not use a DALI address, hence all 64 addresses can be used

for control gear..

5.5. Firmwareupdate

Please ensure that you are using the last recent DALI-Cockpit version.

Update Procedure:

1. Connect the DALI-Bluetooth Modul to the DALI-line. Connect your computer with the DALI-

Cockpit to the DALI-line using a DALI-USB or DALI RS232 interface.

2. Open the DALI-Cockpit and address the devices. Select the device in the component tree

Table des matières

Autres manuels AUTLED Équipement d'enregistrement

AUTLED

AUTLED LC-012-004 Manuel utilisateur

AUTLED

AUTLED LC-004-000 Manuel utilisateur

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien