AuthenTrend ATWallet Manuel utilisateur
Quickstart Guide
Check your box
contents
Recovery Sheets
AT.Wallet
USB Docking
USB Cable
E-ink Display
LED #1 #2
Fingerprint Sensor Serial Number
Charge your AT.Wallet first.
Insert your AT.Wallet card into the docking to
connect to the USB port or any adaptor.
Contents
Wallet Creation or Recovery
Transactions
Wallet's Features & Settings
Wallet Setup
-Wallet creation
Download the AT.Wallet app from the
App Store, Google Play or Windows
Scan the QR code directly and the link will take you to
the store page for your OS, very convenient
！
Set up your AT.Wallet with either
Bluetooth or USB
Press the power button to turn on AT.Wallet.
Double-press the power button to start Bluetooth
secure pairing mode. >>> LED#2 is in Cyan!
You can see your AT.Wallet is on the app. Click!
It's much easier to pair your AT.Wallet with your phone
in BLE mode.
1.
2.
3.
x2
Click 'Pairing' on the app.
Check the codes shown on your card and the app
are the same.
Touch the fingerprint sensor to start pairing.
1.
2.
3.
Bluretooth pairing request
481854
Enroll FP
Touch the sensor with a wide range of your finger
around 14-16 times until 100% enrollment.
Enroll your fingerprint
Verify FP
LED#2 shows GREEN when you finish enrollment.
Verify the enrolled fingerprint to log into AT.Wallet app.
1.
2.
Verify the enrolled fingerprint
Pass
Table des matières
Autres manuels AuthenTrend Lecteur de cartes
