5Apex Minirail mounting system
Installation Manual
1
1.1
1.2
1.3
The main purpose of this installation manual is to provide instructions and detailed procedures
for installing and maintaining Autarco’ pitched trapezoidal roof mounting systems based on
minirails, for buildings up to 20m in height.
Safety symbols
DANGER! A danger symbol indicates a hazardous situation, which if not avoided, will result in
death or serious injury.
WARNING! Indicates a hazardous situation which, if not avoided, can result in serious injury.
ATTENTION! Attention statements are used to indicate where a part of the process or equipment
has a special requirement. Attention statements should be followed at all times.
Target audience
This manual is intended for qualified personnel only, who install an Autarco solar PV solution
with Minirail mounting systems. Before any further action, the installer must first read all safety
regulations and be aware of the potential danger to operate high-voltage devices such as PV
modules.
ATTENTION! Qualified personnel means a person with valid license from the local authority for:
- Installing electrical equipment and PV power systems (up to 1000 V)
- Applying all applicable installation codes and using personal protective equipment (PPE)
- Analyzing and reducing the hazards involved in performing electrical work
Mounting rail models covered
The Minirail is installed on corrugated (trapezoid) roofs using one of the following Autarco
mounting plates:
+ M2.AR6TRL395 – For Portrait mounting
+ M2.R5CRXL150 – For Landscape mounting
Further information on the types of roof mounting hooks are available online at
www.autarco.com/downloads/
Introduction
