3
1 -
SAFETY
Wiring
Check whether your heater and power cord are
damaged before operating your appliance. If yes, do
not plug your heater and contact with authorized
technical service.
Check whether there is any crack, disjoint or scratch
on the heating tube. If any, do not plug your heater
and contact with authorized technical service.
Caution! Do not use your heater together with
another appliance connected to the same supply line
or connected to the same breaker.
Use your heater with a properly earthed plug.
The earthed plug must be outside heating area and
hot surface.
The power cord must not be left on or around the
frame of your heater.
Unplug your appliance when you won’t operate it for
a long term or will conduct cleaning
or maintenance.
Installation and operation
Heater is not to be recessed
Do not touch the heater during operation. Burn or
scald injury could result. The casing and components
are extremely hot during operation.
The heater must be installed at level on a flat, stable
surface, rigid enough to withstand safely the weight
of the heater and not covered by any flexible
material, such as carpets, plastic or fabric.
Do not cover your heater and do not hang any
clothing over the heater or do not place any clothing
on or near the heater.
Do not stick anything into the protective grid.
Do not use the heater without the aluminium guard
in place.
To prevent a possible fire, do not block air intakes or
exhaust in any manner.
Do not make use of your heater to light up cigarette
or similar materials.
The appliance is not
intended for use by children or other persons
without assistance or supervision if their physical,
sensory or mental capabilities prevent them from
using it safely.
Do not use gasoline or other flammable vapors or
liquids, including aerosol cans, in the vicinity of this
heater while it is operating.
Do not insert or allow foreign objects to enter any of
the heater openings. Electrical shock could result.
Keep combustible materials, such as furniture,
pillows, bedding, papers, clothes, curtains, etc. at
least 6 feet (0.9m) from the front of the heater and
keep them away from side and rear.
