AudioCodes C450HD Manuel utilisateur

AudioCodes C450HD IP Phone for Microsoft® Teams™

Quick Guide

Page | 1

1. Before Installing

Congratulations on purchasing your AudioCodes C450HD for Microsoft Teams IP Phone!

Before installing your phone, make sure the following items are included in the shipped box:

C450HD IP Phone

AC power adapter (optional)

Cat 5e Ethernet cable

Handset

Handset cord

Desktop stand

Wall mount

2. Physical Description

VOICEMAIL Key

HOLD Key

Alphanumerical

Keypad

Headset Key

Navigation Control

CONTACTS Key

REDIAL

Key

TRANSFER Key

Mute Key

Volume Keys

MENU Key

Speakerphone Key

Touch Screen

Microphone

Back Key

Page | 2

3. Cabling the Phone

Warning: Prior to connecting power, refer to the Compliancy and Regulatory Information

document at https://www.audiocodes.com/library/technical-documents.

To cable the phone:

1. [Refer to the illustration below] Connect the short, straight end of the phone cord to the

handset and the longer straight end of the cord to the handset jack on the phone.

2. (Optional) Connect a headset to the RJ-9 headset port , or to one of the two USB ports .

3. Connect the RJ-45 LAN port to your LAN network (LAN port or LAN switch/router) with a

CAT5 / 5e Ethernet cable.

4. Connect the RJ-45 PC port to a computer with a CAT5 / 5e straight-through Ethernet cable.

5. Connect the connector tip of the AC power adapter to the phone's DC 12V power socket and

connect the two-prong AC adapter directly to the electrical wall outlet. When the phone powers

up, all the LEDs momentarily light up.

Page | 3

4. Mounting the Phone on a Desktop or Wall

Desktop: Slide the L-shaped stand's short or long edge slots onto these rails.

Wall: Slide the wall mount fitting onto these rails.

Desk Mount

Page | 4

Wall Mount

To mount the phone on a wall:

1. Using the mounting plate's two screw holes as a template, mark the locations on the wall where

you want to mount the phone. The horizontal distance between the screw holes is 4 7/8 inches

(123.8 mm).

2. Drill a hole in the wall at the two marked locations.

3. Insert an anchor (not supplied) in each hole for the 3.9mm screws.

4. Insert two screws (not supplied) into the two masonary anchors. It's recommended to use tapp

3.9 x 32mm (DIN 7981 C) self-tapping pan Phillips-head screws.

5. Leave about 3/16 inch or 5 mm between the screw head and the wall.

6. On the rear of the phone, detach the base used for desktop mounting.

Page | 5

7. Hang the plate on the screws.

8. Attach the phone to the plate.

Note: Wall mounting is not supported when the Expansion Module is attached to the

IP Phone.

Page | 6

5. Signing in

To sign in with your username and password:

1. After connecting to the network, touch the Sign In button.

2. Enter your username (e.g., [email protected]).

3. Enter your password (the same as your Microsoft Exchange password).

To sign in from another device:

1. Touch the Sign In button, and then select the Sign in from another device option.

2. In the Web browser, navigate to https://microsoft.com/devicelogin.

3. In the Microsoft Web page, enter the code shown on the C450HD screen, and then complete

the process by entering your username and password.

Page | 7

To sign out: Swipe right, touch Settings, and then select the Sign Out option and confirm.

6. Changing your Presence Status

To change your presence status: Swipe right, touch the current presence status, and then select

the status you require.

Page | 8

7. Basic Phone Operations

For basic phone operations, refer to Microsoft documentation, and AudioCodes

C450HD IP Phone for Microsoft Teams User's and Administrator's Manual.

8. Connecting to a Router via Wi-Fi

Note: This section is applicable only to models with Wi-Fi functionality.

The phone can connect to an Access Point via Wi-Fi. The Wi-Fi interface can be used to make VoIP calls

over Wi-Fi, when the phone is installed in an environment free of LAN/cables.

To connect to Wi-Fi:

1. Navigate to the Settings menu.

2. Select the Wi-Fi option.

Page | 9

9. Enabling or Disabling Wi-Fi

To enable Wi-Fi:

1. Turn Wi-Fi on by moving the switch in the upper right corner, to the On position (Wi-Fi is

disabled by default).

2. After enabling Wi-Fi, "Searching for Wi-Fi networks…" is displayed. The phone then displays the

available Wi-Fi Access Points. Select the desired Wi-Fi Access Point (network).

3. Enter the Wi-Fi password if needed, and then tap Connect.

4. When connected to the Access Point, "Connected" is displayed:

Page | 10

10. Configuring Bluetooth

Note: This section is applicable only to models with Bluetooth functionality.

The Bluetooth interface is used to connect the phone to a wireless headset or speaker.

To pair and connect a remote Bluetooth device:

1. Press the phone’s MENU hard key to access the 'Settings' menu.

2. In the Settings screen, select the Bluetooth option, and then in the Bluetooth screen, move the

switch to On to start Bluetooth scanning.

Autres manuels pour C450HD

Table des matières

Autres manuels AudioCodes Téléphone IP

AudioCodes

AudioCodes C450HD Manuel de service

AudioCodes

AudioCodes C448HD Manuel utilisateur

AudioCodes

AudioCodes C470HD Manuel utilisateur

AudioCodes

AudioCodes 405HD Manuel d'utilisation et d'entretien

AudioCodes

AudioCodes C455HD Series Manuel utilisateur

AudioCodes

AudioCodes 420HD Manuel d'utilisation et d'entretien

AudioCodes

AudioCodes Device Duo Instructions d'installation et d'utilisation

AudioCodes

AudioCodes C435HD Manuel utilisateur

AudioCodes

AudioCodes 300HD Series Manuel utilisateur

AudioCodes

AudioCodes 310HD Manuel d'utilisation et d'entretien

AudioCodes

AudioCodes Huddle Room Solution Manuel utilisateur

AudioCodes

AudioCodes 405 Manuel utilisateur

AudioCodes

AudioCodes 420HD Manuel d'utilisation et d'entretien

AudioCodes

AudioCodes 440HD Manuel utilisateur

AudioCodes

AudioCodes C455HD Series Manuel utilisateur

AudioCodes

AudioCodes 420HD Manuel utilisateur

AudioCodes

AudioCodes 420HD Comment utiliser

AudioCodes

AudioCodes 445HD Manuel utilisateur

AudioCodes

AudioCodes 400HD Series Manuel d'utilisation et d'entretien

AudioCodes

AudioCodes 445HD Manuel utilisateur

AudioCodes

AudioCodes 450HD Manuel utilisateur

AudioCodes

AudioCodes 400HD Series Manuel utilisateur

AudioCodes

AudioCodes C450HD Manuel utilisateur

AudioCodes

AudioCodes 450HD Manuel utilisateur

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Polycom

Polycom Polycom VVX 600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Cisco

Cisco SPA-500 Series Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur