Audio Technica ATND1061DAN Manuel utilisateur

ATND1061DAN

Beamforming Array Microphone

User Manual - Main Unit Edition -

English

Table of Contents

Tableof Contents

Safety precautions 4

Battery caution 4

For customers in the USA 4

FCC Notice 4

For customers in Canada 5

ISED statement 5

Installation precautions 6

Maintenance 7

Package contents 8

Part names and functions 10

Microphone 10

ATND1061DAN 10

Indicator lamp 11

IR remote controller 11

How to change presets 12

Installation 13

Hard ceiling installation 13

Surface mounting 13

Flush mounting 18

Grid ceiling installation 24

Surface mounting 24

Flush mounting 30

Installation with VESA mount 38

Removing the microphone 39

Surface mounting 39

Flush mounting 40

Connection procedure 42

System connection examples 42

ATND1061DAN (single cable mode) 42

ATND1061DAN (split mode) 43

ATND1061DAN (connecting multiple units) 44

ATND1061DAN (single cable mode and analog I/O) 45

Connecting Euroblock connectors 45

GPI port 47

Reset button 48

Checking the network mode 48

Network reset 48

Factory reset 49

Digital Microphone Manager 50

Table of Contents

Dante Controller 51

Dante channel list 51

Input (Dante Transmitter) 51

Output (Dante Receiver) 51

Web Remote 52

What is Web Remote? 52

What is Locate? 52

Recommended environment 52

OS for running Web Remote and Locate 52

Recommended web browsers for Web Remote 52

Preparation for Web Remote 53

Connecting the microphone with the control device 53

Setting up Locate 53

Launching Web Remote 54

Launch from Locate 54

Launch by directly specifying the IP address 54

Basic operations on Setting & Maintenance screen 54

General (System Settings) 56

Device Name 56

LED Settings 56

Dimmer Settings 56

Network (System Settings) 56

Network Configuration 56

Dante & Audio Port Settings 57

IP Control & Web Remote Port Settings 57

Allow Discovery 57

IP Control Settings 58

Utilities (System Settings) 58

Firmware Update 58

Reset All Settings to Default 59

Audio (Install Settings) 60

Beam CHs 60

Analog Input 60

Auto Mix CH 61

Analog Output 61

Dante Tx#6 Signal 61

Presets 61

Exporting presets 62

Importing presets 62

Table of Contents

Logging 64

System Info 64

Header 64

Displaying descriptions of errors 65

Presets 65

Saving presets 66

Recalling presets 66

Function List 68

Troubleshooting 73

Dimensions 76

ATND1061DAN 76

Surface mount adapter 77

Flush mount adapter 78

Flush mount cover 79

Tile bridge A 79

Tile bridge B 80

Tile bridge C 80

Assembly diagram of tile bridge for grid ceiling 81

Specifications 82

ATND1061DAN 82

General 82

Microphone 82

Analog audio 82

Other 83

Polar pattern / Frequency response 84

Polar pattern 84

Frequency response 84

Trademarks 85

System diagram 86

Safety precautions

Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure

safety, observe all warnings and cautions while using the product.

The product is intended for commercial use, not for general use.

Disconnect the product from a device if the product begins to malfunction, producing smoke, odor, heat, unwanted

noise or showing other signs of damage. In such a case, contact your local Audio-Technica dealer.

Do not disassemble, modify or attempt to repair the product to avoid electric shock, malfunction or fire.

Do not subject the product to strong impact to avoid electric shock, malfunction or fire.

Do not handle the product with wet hands to avoid electric shock or injury.

Do not allow the product to get wet to avoid electric shock or malfunction.

Do not put foreign matter such as combustible materials, metal, or liquid in the product.

Do not cover the product with a cloth to avoid fire or injury by overheating.

Keep the product out of the reach of small children. The product is not intended for use around children.

Do not place the product near fire to avoid an accident or the product catching fire.

Do not put the product in a location where it is exposed to direct sunlight, near heating devices, or in places with high

temperatures, high humidity, or high concentrations of dust to avoid electric shock, fire, malfunction, etc.

Keep away from a fire to avoid deformation or malfunction.

Do not use chemicals such as benzine, thinner, electrical contact cleaner, etc. to avoid deformation or malfunction.

Battery caution

Keep batteries out of the reach of children.

Observe correct polarity as marked.

Do not expose the battery to excessive heat such as sunshine, fire or the like.

Always consider the environmental issues and follow local regulations when disposing of batteries.

Remove depleted battery immediately.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Do not use rechargeable batteries.

Do not use a leaking battery. If battery leakage occurs, avoid contact with skin. If contact occurs, immediately wash

thoroughly with soap and water.

If battery leakage comes into contact with your eyes, immediately flush with water and seek medical attention.

For customers in the USA

FCC Notice

Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Safety precautions

Caution

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to

operate this equipment.

Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Contact

Responsible Company: Audio-Technica U.S., Inc.

Address: 1221 Commerce Drive, Stow, Ohio 44224, USA

Tel: 330-686-2600

For customers in Canada

ISED statement

CAN ICES-3(B)/NMB-3(B)

Installation precautions

This product should be installed by a professional contractor. When determining the installation location and

method, be sure to consider the applicable laws and ordinances for the area where the product is being installed.

Audio-Technica assumes no responsibility in the event of accidents such as the product dropping due to insufficient

strength of the installation site or improper installation.

When working in an elevated location, be sure to choose a stable location with no loose items on the ground before

working.

Install the product in a location where there is no risk of the product being hit or damaged by the movements of

nearby people or equipment.

Be sure to verify the strength of the installation location. The installation location should generally be able to handle

at least 10 times the weight of the product.

Depending on the structure of the ceiling, vibrations may cause noise to be generated. Appropriate separate

damping measures are recommended.

Be sure to use only the included accessories for installation.

Do not use the included accessories for any purpose other than for use with this product.

Do not install the product in areas with exposure to high levels of oil or smoke, or where solvents or solutions are

volatilized. Such conditions may result in chemical reactions that lead to deterioration or damage of the product’s

plastic parts, which may cause an accident such as the product dropping from the ceiling.

Do not install the product in areas where damage from salt or corrosive gas may occur. Such damage may reduce

the strength of the product and cause an accident such as the product dropping from the ceiling.

Be sure to tighten the screws properly and completely. Failing to do so may result in injury due to an accident such as

the product dropping from the ceiling.

Do not pinch the cables during installation.

Securely attach the seismic cable, zip tie, and safety belt in the specified location.

Attach the seismic cable so that there is as little slack as possible.

If the impact from a fall is applied to the seismic cable, replace the cable with a new one.

Maintenance

When dirty or dusty, wipe clean using a dry, soft cloth.

Do not use benzine, paint thinners, or electrical contact cleaners. Doing so may cause deformation or

malfunction.

Package contents

1 2 3

4 5 6

7 8 9

10 11 12

13 14

1716

Microphone

IR remote controller

Includes a lithium coin battery.

Package contents

Surface mount adapter

Screw (M4 × 50 mm) × 4

Flush mount adapter

Flush mount cover

Screw (M4 × 10 mm) × 12

Hole cover

Nut × 4

Snap bushing × 2

Tile bridge A × 2

Tile bridge B × 2

Tile bridge C × 4

Seismic cable

Zip tie

Safety belt

Euroblock connector × 3

Installation template

Quick Start Guide

Autres manuels pour ATND1061DAN

Table des matières

Autres manuels Audio Technica Microphone

Audio Technica

Audio Technica ES915H Manuel du propriétaire

Audio Technica

Audio Technica MICROLINE AT915AMRX/ML Mode d'emploi

Audio Technica

Audio Technica unipoint U853AU Manuel utilisateur

Audio Technica

Audio Technica ES935H6 Manuel du propriétaire

Audio Technica

Audio Technica OmniPlate AT841a Manuel utilisateur

Audio Technica

Audio Technica UniPlate AT891R Manuel utilisateur

Audio Technica

Audio Technica ATR1300x Manuel utilisateur

Audio Technica

Audio Technica AT8022 Manuel utilisateur

Audio Technica

Audio Technica Engineered Sound AT935AMRx/C Manuel du propriétaire

Audio Technica

Audio Technica ATM350a Series Manuel utilisateur

Audio Technica

Audio Technica AT4053a Manuel utilisateur

Audio Technica

Audio Technica MicroSet BP892 Guide d'installation

Audio Technica

Audio Technica U891RC Manuel du propriétaire

Audio Technica

Audio Technica ATR2500-USB Manuel utilisateur

Audio Technica

Audio Technica ES961RC Manuel du propriétaire

Audio Technica

Audio Technica AT933PM Manuel utilisateur

Audio Technica

Audio Technica ATR4697-USB Manuel utilisateur

Audio Technica

Audio Technica ES933PMH Manuel du propriétaire

Audio Technica

Audio Technica Propoint PRO 44 Manuel utilisateur

Audio Technica

Audio Technica AT2010 Manuel utilisateur

Audio Technica

Audio Technica AT831R Manuel utilisateur

Audio Technica

Audio Technica AT4050 Manuel utilisateur

Audio Technica

Audio Technica unipoint U857AU Manuel utilisateur

Audio Technica

Audio Technica PRO 41 Manuel utilisateur

Manuels Microphone populaires d'autres marques

IK Multimedia

IK Multimedia iRig Stream MIC PRO Manuel utilisateur

DAPAudio

DAPAudio RM-101 Manuel utilisateur

AKG

AKG CHM 21 Manuel utilisateur

Sennheiser

Sennheiser evolution wireless series EM 100 Manuel utilisateur

Sony

Sony C-48 Manuel utilisateur

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Manuel utilisateur

Shure

Shure WH30TQG Manuel utilisateur

auna PRO

auna PRO MIC-900 Manuel utilisateur

AKG

AKG D 3800 Manuel utilisateur

Shure

Shure KSM141 Manuel utilisateur

MAIIN SOUND

MAIIN SOUND IIN style Manuel utilisateur

Earthworks

Earthworks TC25 Manuel utilisateur

Sennheiser

Sennheiser evolution D1 Manuel utilisateur

Alesis

Alesis MicLink Wireless Manuel utilisateur

DSPPA

DSPPA D6234 Manuel utilisateur

Monacor

Monacor IMG STAGELINE ECM-300B Manuel utilisateur

Ansr Audio

Ansr Audio Scan16 Manuel utilisateur

Shure

Shure MXA710 Series Manuel utilisateur