Audio Note CDT Six Manuel technique

CDT Six / Force

CD TRANSPORT

OWNER’S INFORMATION

! IMPORTANT SAFETY INFORMATION !

HUMIDITY: DO NOT STORE OR OPERATE THIS UNIT IN AREAS OF HIGH HUMIDITY, OR IN CLOSE

PROXIMITY TO WATER/DAMPINESS. DO NOT EXPOSE THE UNIT TO LIQUID.

EARTHING: THIS PRODUCT MUST BE EARTHED –ENSURE THAT THE MAINS SUPPLY CABLE IS

EARTHED.

SHOCK: INTERNAL OPERATING VOLTAGES ARE LETHAL! DO NOT REMOVE THE TOP COVER. DO

NOT ATTEMPT TO REPLACE THE FUSE WITHOUT DISCONNECTING THE UNIT FROM THE MAINS

SUPPLY.

SAFETY COMPONENTS: INTERNAL FUSES AND OTHER SAFETY COMPONENTS ARE LOCATED

INSIDE THIS UNIT IN ACCORDANCE WITH BS 60065 REQUIREMENTS.

IN THE EVENT OF SAFETY COMPONENT FAILURE, THEY MUST BE REPLACED WITH THE SAME

PART TYPES ONLY. SUCH REPLACEMENT MUST BE CARRIED OUT BY A QUALIFIED SERVICE

TECHNICIAN.

PRECAUTION

Never touch the power cord with wet hands.

Always pull the power cord out by the plug, not by the cord.

Never expose the system to rain, moisture, excessive heat and magnetism.

Never let an inexperienced person repair or reassemble the unit.

Never put anything, especially metal, into the unit.

Never place excessive weight on the unit.

Always remove compact disc and CD clamp out of the unit before carrying or

transportation.

POWER REQUIREMENTS

Power requirements for electrical equipment differ from area to area. Please ensure

that your unit meets the power requirements in your area. The power requirement for your

transport is marked on the serial number plate on the rear panel.

If you are in doubt, please contact your dealer before plugging the unit into the mains!

CE DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product is in conformity with the following

standards or standardized documents:

BS EN 60065 in accordance with the regulations 73/23/EEC, 89/336/EEC (from 1st January 1997).

CE 94

Peter Qvortrup

Director

Audio Note (UK) Limited

25 Montefiore Road,

Hove,

East Sussex

BN3 1RD

United Kingdom

Tel: +44 (0)1273 220 511

Fax: +44 (0)1273 731 498

WARRANTY AND SERVICING

Audio Note warrants this product free from defects in materials and workmanship for 2 years

from original date of purchase from an appointed Audio Note dealer. The valves are warranted

for 3 months. In the event that your Audio Note product requires servicing, please contact your

Audio Note dealer. If the equipment needs to be shipped, please use the original packaging and

include a copy of the sales purchase, with a note, explaining in as much detail as possible, the

problems that you are experiencing with the unit.

Any modification not authorized by Audio Note will invalidate this warranty.

If you require technical support, new valves or have any questions, please direct them to your

Audio Note dealer first or contact us directly.

Customer Support:

Audio Note (UK) Limited,

25 Montefiore Road

Hove, East Sussex,

BN3 1RD,

United Kingdom

Tel: +44 (0)1273 220511

Fax: +44 (0)1273 731498

Email: [email protected]

CLASS 1 LASER PRODUCT

This product contains a low power laser device. To ensure continued safety, do not

remove any covers or attempt to gain access to the inside of the product. Refer servicing to

qualified personnel.

Make Your Contribution to Protect the Environment

Used batteries with the ISO symbol for recycling, as well as small accumulators

(rechargeable batteries), mini-batteries (cells) and starter batteries should not be thrown into

the dustbin. Please leave them at an appropriate depot.

This equipment conforms to No. 62/499/EEC, 87/308/EEC standard.

TABLE OF CONTENTS

1 PRECAUTIONS

3 UNPACKING & INSTALLATION

4 CONNECTION

5 OPERATIONS

7 PROGRAMMING

8 TROUBLESHOOTING GUIDE

SPECIFICATIONS

GENERAL

Congratulations

on your purchase of the Audio Note

CDT Six

CD transport with an external

power supply

CDT Six Force

Audio Note is highly critical of the digital medium as presented by compact disc; we

sincerely hope that you too will find this transport breaks free from the 'digital mould' that we

are all so accustomed to, and so open a new window on your CD collection.

Please read over this manual carefully in order to obtain the best possible performance

and longevity from your transport.

UNPACKING & INSTALLATION

1.) Please take care when unpacking both units of the

CDT Six

. As both units are very

heavy, an extra pair of hands would be welcome! We recommend that you store the packing

materials in case the unit requires shipping at a later date.

2.) Next, select a suitable location for units, for example, a dry and dust-free area which

is not exposed to direct sunlight. Place both units on level flat surface free from vibration.

3.) Please remove 2 transit screws and the plastic plate, located on the top of the CD

loading area of the

CDT Six

and marked with yellow washers, to release the sprung sub-

chassis.

Connections:

Digital output connector on the back of

CDT Six

unit provide a digital output for

connection to your DAC via your digital interconnect with RCA connectors. Your dealer can

advise on suitable type and quality of cable eg: - Audio Note digital SOOTTO is an excellent

choice.

Power inputs: please use the 3 supplied power cables to connect the CD transport unit

to the power outputs of the

CDT Six Force

power supply unit:

Mains connector on the back of the

CDT Six Force

: An IEC power connector is available

for connection to the mains using the supplied mains cable. For further improvement is sound,

we recommend to use Audio Note SOGON mains cable.

Mains switch is located on the back of the

CDT Six Force

just above the mains socket

and turns both units ON / OFF.

The transport's sonic performance will start to improve as the internal parts 'bed' in.

The transport requires about 400-600 hours of operation before the bedding in process is

complete.

LOADING THE DISC

Please open the sliding disc cover on the top of the

CDT Six

. Put the disc on the spindle

and secure it with the supplied disc clamp. Close the disc cover.

OPERATIONS

VIA BUTTONS LOCATED ON THE FRONT PANEL

PLAY/PAUSE Press this button to play a disc.

Pressing this button again will pause playback.

Press the button again to resume playback.

STOP Press this button to stop playback.

SKIP ( ) Press these buttons to go to the previous or the next track.

DISPLAY Press this button to change the intensity of display or to turn it on/off.

VIA REMOTE CONTROL

The batteries for the remote control handset for the

CDT Six

are not

included. Please purchase them (high quality AA bateries is

recommended) and fit into the handset before operating the remote

control. Please ensure that the batteries are inserted correctly.

PLAY/PAUSE ( ►▐▐ ) - Press this button to play a disc. Pressing this

button again will pause playback. Press the button again to resume

playback.

STOP ( ■) - Press this button to stop playback.

SKIP ( ) - Press these buttons to go to the previous or the next

track.

SEARCH ( ) - Press these buttons to cue or review a track.

To reverse (review) a track, hold down the SEARCH button. To

cue (fast forward) a track, hold down the SEARCH button.

MEMORY - Use the Memory button for programming and reviewing

programs.

IMPORTANT INFORMATION

Compact disc transports have built-in error compensation circuits to correct minor

manufacturing defects on a disc. In some cases, defects on the disc, which are too large

for the error compensation circuits to handle, may cause the CD player to skip some

tracks during playback. If this problem occurs, play a new disc, normal playback of the

new disc indicates that the previous disc is damaged in some way. However, if the

problem continues, it is best to have the unit serviced.

PROGRAMMING

You may select a number of tracks and store them in the memory in the desired

sequence. The transport will then play back only your selection of tracks in the selected

order.

1 Press the MEMORY button. 'MEMORY' will appear on the display.

2 Press the CD SKIP or numbered buttons - To select the desired track to be stored.

3 Press the MEMORY button - The track is now stored in the memory.

Repeat steps 2 and 3 to complete programming.

4 Press PLAY to listen to the programmed tracks.

5 Press STOP once to stop playback.

6 Press STOP second time to clear programming.

A maximum of 32 tracks may be stored.

A particular track in your selection may be replaced with a new one if the original

selection was made in error. Simply store the new track in the program number to be

replaced.

NOTE: Programming may not be made during playback.

TIME button. Press this button to see the elapsing or remaining time of the CD

(Play mode only). Press the TIME button and select the desired TIME DISPLAY for CD

playback.

Each time this button is pressed, selection is as follows:

"EACH REMAIN" the elapsed playing time for the current track

"TOTAL" the total elapsed playing time

"TOTAL REMAIN" the remaining playing time for the current track

REPEAT button. Press this button to listen to the music repeatedly. Press once to

repeat the entire disc. Press twice to repeat the track being played.

RANDOM button. Press this button for random order (shuffle) playback.

NUMBERED buttons. A particular track may be selected for playback by using these

buttons. Example:

To play track No. 3, press the button “3” once.

To play track No. 14, press the buttons “1” and “4”.

To play track No. 20, press the buttons “2” and “0”.

DISPLAY button. Press this button to change the intensity of display or to turn it

on/off.

Press the DISPLAY button once to reduce the intensity of the display. Press the

DISPLAY button twice to turn the display off. To turn the display on again, please press

DISPLAY button once again.

TROUBLESHOOTING GUIDE

Refer to the relevant sections in the manual for remedy suggestions.

SYMPTOM CHECK POINT

No sound from the CD player. CD input is not selected on the amplifier.

Playback does not start. The disc cover is not fully closed.

The disc is dirty or scratched.

The disc is upside down.

The player is in the PAUSE mode.

Moisture condensation has caused the unit to

operate incorrectly.

" NO DISC" appears. There is no disc loaded or the disc is loaded

incorrectly.

The disc clamp is not in place.

Playback does not start from The player is in the PROGRAM or RANDOM mode.

the first track. Press the STOP (■) button to cancel the program

mode or RANDOM button to cancel random mode.

SPECIFICATIONS

Optical pick-up: 3 beam laser

Semi-conductor laser: 780 nm

Power source: AC 100-120V/220-240V 50/60 Hz

Fuse: 220/240V 4 x 800 mA Slow blow (T type)

100/120V 4 x 1.6 A Slow blow (T type)

Dimensions

CDT Six

: 445 (W) x 160 (H) x 428 (D) mm

(incl. connectors)

Dimensions

CDT Six Force

: 445 (W) x 160 (H) x 428 (D) mm

(incl. connectors)

Weight

CDT Six

: 36 kg

Weight

CDT Six Force

: 23 kg

Max. power consumption: 60W

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Audio Note Lecteur CD

Audio Note

Audio Note CDT Zero/II Manuel technique

Audio Note

Audio Note CD Zero Manuel technique

Audio Note

Audio Note CD 3.1x/II Manuel technique

Audio Note

Audio Note CD 4.1x Manuel technique

Audio Note

Audio Note CDT One/II Manuel technique

Audio Note

Audio Note CD 1.1x Manuel technique

Audio Note

Audio Note CD 4.1x Manuel technique

Audio Note

Audio Note CDT-Six / Force Mode d’emploi

Audio Note

Audio Note CDT One/II Manuel technique

Audio Note

Audio Note CD 2.1x/II Manuel technique

Audio Note

Audio Note CD 1.1x Manuel technique

Audio Note

Audio Note CD 2.1x/II Manuel technique

Audio Note

Audio Note CD2.1x Manuel technique

Audio Note

Audio Note CDT Two/II Manuel technique

Audio Note

Audio Note CD3.1x Manuel technique

Audio Note

Audio Note AN-CD1 Manuel technique

Audio Note

Audio Note CDT - Two Manuel technique

Audio Note

Audio Note CDT Three Mode d’emploi

Audio Note

Audio Note CDT Five Manuel technique

Audio Note

Audio Note CDT ZERO Transport Manuel technique

Audio Note

Audio Note CDT Zero/II Manuel technique

Audio Note

Audio Note CD Zero Manuel technique

Manuels Lecteur CD populaires d'autres marques

RCA

RCA RP-7923 Manuel utilisateur

Pioneer

Pioneer DEH-P3550MP XM Manuel utilisateur

Philips

Philips AZ1207 Manuel utilisateur

Philips

Philips CD582 Manuel utilisateur

Philips

Philips AZ 6821 Manuel utilisateur

Lasonic

Lasonic MSU-2020 Manuel utilisateur

THOMSON

THOMSON RCD150 Manuel utilisateur

Denon

Denon DCD-1420 Manuel utilisateur

Panasonic

Panasonic SJ-MR100 Manuel utilisateur

Onkyo

Onkyo DX-7210 Manuel utilisateur

Sony

Sony MZ-R3 Manuel utilisateur

Denon

Denon DVM-4800 Manuel utilisateur

JBL

JBL MR-32 Manuel utilisateur

RCA

RCA RCD152 Manuel utilisateur

Technics

Technics SL-PS770A Manuel utilisateur

Clarion

Clarion compact disc Manuel utilisateur

Sony

Sony MZ-M10 Manuel utilisateur

Philips

Philips Expanium AZ 1538 Manuel utilisateur