5
Precautions
• Contact your dealer for installation.
Skill and experience are required for installation to
avoid risk of fire, electric shock, injury and damage.
• Do not insert objects.
• If water or metallic items are inserted inside, there
is a risk of fire or electric shock.
Unplug all cables and contact your dealer.
• Do not disassemble and modify.
There is a risk of fire or electric shock.
• Stop using the product immediately if any abnormality
is detected.
There is a risk of fire if you continue to use the product
after smoke or odor is detected.
Unplug all cables and contact your dealer.
• Avoid placing the product in unstable positions to pre-
vent falling or injury.
• Be sure to hold the plug while pulling the power cable.
The cable may be damaged and there is a risk of fire
or electric shock.
• Dust off the power plug of power cable periodically.
If dust accumulates, insulation failure caused by
humidity occurs and there is a risk of fire.
Unplug the power plug and wipe it with a dry cloth.
• Insert the power plug of power cable completely.
There is a risk of electric shock or overheating if the
insertion is incomplete.
Do not use a damaged or loosened plug and AC
outlet.
• Do not use the product beyond the rated value of the
AC outlet or wired devices.
Do not use voltage of more than 100 V AC – 240 V
AC.
Multiple circuit wiring exceeding the rated value may
result in overheating and fire.
• Do not use the power cable or the AC adaptor in a
way that may cause damage (modifying, placing near
heat, bending excessively, twisting, stretching, weigh-
ing down or bundling). There is a risk of electric shock,
short-circuit or fire when using damaged power cable
or AC adaptor. Contact your dealer.
• To avoid electric shock, do not handle the power plug
or power cable with wet hands.
• Avoid placing containers of liquid such as water near
the product.
If liquid spills onto the product, it may cause fire or an
electric shock.
Unplug all cables and contact your dealer.
• Do not install or wire during lightning/electrical storms.
There is a risk of fire or electric shock.
• Fix the mounting screw firmly to prevent falling or
or injury.
Contact your dealer for installation.
• Use the specified Switch-mode power supply (herein-
after, AC adaptor).
There is a risk of electric shock if any unspecified AC
adaptor is used.
Make sure to use the supplied AC adaptor.
• Be sure to turn off the power of this product before
installation.
There is a risk of electric shock.
• Do not place the product in humid or dusty locations.
There is a risk of fire or electric shock.
• Power supply: 100 V AC – 240 V AC. (Using supplied
AC adaptor)
Do not use the same AC outlet with high-powered
products (such as copy machine or air conditioner).
• Operating temperature (including AC adaptor):
0 °C to +40 °C {+32 °F to + 104 °F}.
If the product is used in temperature out of this
range, internal parts may be badly affected, and
malfunctions may occur.
• Condensation:
There is a high risk of condensation when humidity is
high or when the product is transferred from low to
high temperature. When condensation occurs, wait for
around 1-2 hours, and after confirming the condensa-
tion has disappeared, turn on power.
•
Unplug the power plug of AC adaptor when out of use
for long periods of time.
• Microphone:
Match the channel of the microphone and the product
in use.
Keep the distance of each microphone more than
50 cm {19-11/16 inches}.
• Noise:
The noise produced from electrical devices such as a
lighting fixture or plasma display when turned “ON” or
"OFF" may cause loud noise from the product.
Keep the infrared wireless devices and coaxial cables
away from the source of noise (high-powered products
such as copy machine or air conditioner and their
power cables) in order to reduce noise.
• Keep this product away from dripping or splashing
water.
• Avoid placing receptacles that contain liquids, such as
vases, on the product.
•
•
•
•
After discontinuing use of the product, it should be
removed to prevent it from dropping.
Product care
Unplug the power plug of AC adaptor before cleaning
the product, otherwise injuries may result.
Wipe with a dry soft cloth.
Do not clean with volatile liquids such as benzine
and thinner. When using a chemical cloth for cleaning,
observe the precautions provided with that product.
