Audio Control M4800 Manuel utilisateur

Audio Control

M4800

M6400

D4600

Crestron Driver User Guide

Audio Control M6400 / M4800 / D4600

Crestron Driver User Guide

Contents

Introduction............................................................................................................... 2

Diagram .................................................................................................................... 3

Module Definitions ...................................................................................................... 4

Audio Control M6400 / M4800 / D4600

Crestron Driver User Guide

Introduction

This driver has been designed to provide two-way control of AudioControl M4800, M6400

and D4600 network amplifiers, via TCP/IP.

The package includes a demonstration file in smw format to aid with integration into a

Crestron project. Additionally, touch panel designs have been created, these can be used

for demonstration purposes and for compatibility testing.

This Crestron module will work on both Series 2 and 3 processors and has been tested with

firmware version 0.1.16_NCB RA.

There are four modules included in the package:

Comms

This module has three purposes:

•Sending and receiving commands to/from the amplifier

•Routing feedback to the other modules

•Assigning zones to groups

Zone Analogue

This driver handles source selection, volume, power, EQ and feedback for a specified

analogue zone. There will be one instance of this driver per analogue zone.

Zone Digital

This driver handles the source selection and power control for a specified digital zone. There

will be one instance of this driver per digital zone.

Group

This driver handles source selection, volume, power, EQ and feedback for a specified group

of zones. There will be one instance of this driver per group.

Audio Control M6400 / M4800 / D4600

Crestron Driver User Guide

Diagram

AudioControl

ZoneAnalogue

AudioControl

ZoneDigital

AudioControl

Group

AudioControl

Comms

Crestron

TCP/IP Client

Audio Control M6400 / M4800 / D4600

Crestron Driver User Guide

Module Definitions

AudioControl_{Model} _Comms_VX_XX.umc

The central module handling all communications between Crestron and the amplifier. This

module will require a "TCP/IP Client" device to be configured in the SIMPL Windows

program, with the IP address of the amplifier defined, and the port defined as “23”.

Signal Name

Type

Description

CommsConnected

Input

Signal FROM TCP/IP Client 'Connect-F'.

CommsRx

Signal FROM TCP/IP Client 'RX$'.

ZoneCommsTx

Signal FROM Zone modules

GroupCommsTx

Signal FROM Group modules

SetZone[x]_ToGroup1

Adding and removing a zone to a group*

SetZone[x]_ToGroup2

SetZone[x]_ToGroup3

SetZone[x]_ToGroup4

Poll Interval

PARAMETER

Time interval between polling attempts. Polling

will keep the module feedback in sync with the

amplifier when changes are made to the device

locally. (The default is 30 seconds. If 0 seconds is

set, polling is disabled).

CommsConnected

OUTPUT

Signal TO TCP/IP Client 'Connect'.

CommsTx

OUTPUT

Signal TO TCP/IP Client 'TX$'.

Zone1CommsTx –

Zone10CommsTx

OUTPUT

Signal TO one or more

AudioControl_ZoneAnalogue.umc modules.

1 to 8

Signal TO one or more

AudioControl_ZoneDigital.umc modules.

9 and 10

Group1CommsTx –

Group 10CommsTx

OUTPUT

Signal TO one or more AudioControl_Group.umc

modules.

Zone[x]_ToGroup1

OUTPUT

Feedback indicating which zones are in Gwhich

groups.

Zone[x]_ToGroup2

Zone[x]_ToGroup3

Zone[x]_ToGroup4

*AudioControl supports 4 groups; these groups can contain any number of zones. A zone

can only be associated to one group at any one time. If you set the zone to a group when

the zone is already associated to another group, then the zone will be removed from its

current group and added to the new group.

SetZone[x]_ToGroup[x] works like a toggle button –pulse it to add the zone to the group.

Audio Control M6400 / M4800 / D4600

Crestron Driver User Guide

AudioControl ZoneAnalogue_VX_XX.umc

Signal Name

Type

Description

ZoneCommsRX

INPUT

Signal FROM

AudioControl_{Module}_Comms.umc This signal

must match the Zone parameter. Example: If

'Zone3CommsTx' is connected, Zone must be set

to 'Zone 3'.

VolumeUp

INPUT

Pulse to nudge volume up by 1 value. Hold to

ramp volume up.

VolumeDown

INPUT

Pulse to nudge volume down by 1 value. Hold to

ramp volume down.

Mute

INPUT

Pulse to mute zone.

Unmute

INPUT

Pulse to unmute zone.

Pulse to toggle current mute state.

Pulse to nudge Bass up by 1 value. Hold to ramp

Bass up.

Pulse to nudge Bass down by 1 value. Hold to

ramp Bass down.

MuteToggle

INPUT

BassUp

INPUT

BassDown

INPUT

TrebleUp

INPUT

Pulse to nudge Treble up by 1 value. Hold to

ramp Treble up.

TrebleDown

INPUT

Pulse to nudge Treble down by 1 value. Hold to

ramp Treble down.

PowerOn

INPUT

Enable zone output.

PowerOff

INPUT

Disable zone output.

LoudnessOn

INPUT

Enable zone loudness setting. This will override

zone Bass/Treble settings.

LoudnessOff

INPUT

Disable zone loudness setting. This will override

zone Bass/Treble settings.

SourceSelect

INPUT

Select the zone source. Valid range 1d to 15d.

1. Analogue Channel 1-2

2. Analogue Channel 3-4

3. Analogue Channel 5-6

4. Analogue Channel 7-8

5. Analogue Channel 9-10

6. Analogue Channel 11-12

7. Analogue Channel 13-14

8. Analogue Channel 15-16

9. Digital A

10. Digital B

11. Digital C (M4800 only)

12. Digital D (M4800 only)

13. Bus A (D4600 only)

14. Bus B (D4600 only)

15. Local (D4600 groups only)

VolumeSet

INPUT

Set the zone volume level. Valid range 0d to

100d.

BassSet

INPUT

Set the zone bass level. Valid range 0d (-10) to

20d (+10). A value of 10d is equivalent to 0

cut/boost or flat response.

TrebleSet

INPUT

Set the zone treble level. Valid range 0d (-10) to

Audio Control M6400 / M4800 / D4600

Crestron Driver User Guide

20d (+10). A value of 10d is equivalent to 0

cut/boost or flat response.

Zone

PARAMETER

The zone that this module is controlling. This

must match ZoneCommsRx.

PowerIsOn

OUTPUT

Indicates zone is enabled.

PowerIsOff

OUTPUT

Indicates zone is disabled.

IsMuted

OUTPUT

Indicates zone is muted.

IsUnmuted

OUTPUT

Indicates zone is unmuted.

LoudnessIsOn

OUTPUT

Indicates zone loudness is enabled.

LoudnessIsOff

OUTPUT

Indicates zone loudness is disabled.

CurrentSource

OUTPUT

Indicates currently selected source. (see

SourceSelect for value range).

CurrentVolume

OUTPUT

Indicates currently set volume. (see VolumeSet

for value range).

CurrentBass

OUTPUT

Indicates currently set bass. (see BassSet for

value range).

CurrentTreble

OUTPUT

Indicates currently set treble. (see TrebleSet for

value range).

CurrentSource

OUTPUT

Indicates currently selected source. (see

SourceSelect for value range).

AudioControl_ ZoneDigital _VX_XX.umc

Signal Name

Type

Description

ZoneCommsRX

INPUT

Signal FROM AudioControl_{Model}_Comms.umc

(Zone1CommsTx - Zone8CommsTx). This signal

must match the Zone parameter. Example: If

'Zone3CommsTx' is connected, Zone must be set

to 'Zone 3'.

PowerOn

INPUT

Enable zone output.

PowerOff

INPUT

Disable zone output.

Zone

PARAMETER

The zone that this module is controlling. This

must match ZoneCommsRx.

PowerIsOn

OUTPUT

Indicates zone is enabled.

PowerIsOff

OUTPUT

Indicates zone is disabled.

CurrentSource

OUTPUT

Indicates currently selected source. (see

SourceSelect for value range).

AudioControl Group VX_XX.umc

Signal Name

Type

Description

GroupCommsRx

INPUT

Signal FROM AudioControl_M6400_Comms.umc

(Zone1CommsTx - Zone8CommsTx). This signal

must match the Zone parameter. Example: If

'Zone3CommsTx' is connected, Zone must be set

to 'Zone 3'.

VolumeUp

INPUT

Pulse to nudge volume up by 1 value. Hold to

ramp volume up.

VolumeDown

INPUT

Pulse to nudge volume down by 1 value. Hold to

ramp volume down.

Audio Control M6400 / M4800 / D4600

Crestron Driver User Guide

Mute

INPUT

Pulse to mute zone.

Unmute

INPUT

Pulse to unmute zone.

Pulse to toggle current mute state.

Pulse to nudge Bass up by 1 value. Hold to ramp

Bass up.

Pulse to nudge Bass down by 1 value. Hold to

ramp Bass down.

MuteToggle

INPUT

BassUp

INPUT

BassDown

INPUT

TrebleUp

INPUT

Pulse to nudge Treble up by 1 value. Hold to

ramp Treble up.

TrebleDown

INPUT

Pulse to nudge Treble down by 1 value. Hold to

ramp Treble down.

PowerOn

INPUT

Enable zone output.

PowerOff

INPUT

Disable zone output.

LoudnessOn

INPUT

Enable zone loudness setting. This will override

zone Bass/Treble settings.

LoudnessOff

INPUT

Disable zone loudness setting. This will override

zone Bass/Treble settings.

SourceSelect

INPUT

Select the zone source. Valid range 1d to 10d.

1. Analogue Channel 1-2

2. Analogue Channel 3-4

3. Analogue Channel 5-6

4. Analogue Channel 7-8

5. Analogue Channel 9-10

6. Analogue Channel 11-12

7. Analogue Channel 13-14

8. Analogue Channel 15-16

9. Digital A

10. Digital B

11. Digital C (M4800 only)

12. Digital D (M4800 only)

13. Bus A (D4600 only)

14. Bus B (D4600 only)

15. Local (D4600 groups only)

VolumeSet

INPUT

Set the zone volume level. Valid range 0d to

100d.

BassSet

INPUT

Set the zone bass level. Valid range 0d (-10) to

20d (+10). A value of 10d is equivalent to 0

cut/boost or flat response.

TrebleSet

INPUT

Set the zone treble level. Valid range 0d (-10) to

20d (+10). A value of 10d is equivalent to 0

cut/boost or flat response.

Zone

PARAMETER

The zone that this module is controlling. This

must match ZoneCommsRx.

GroupCommsRx

OUTPUT

PowerIsOn

OUTPUT

Indicates zone is enabled.

PowerIsOff

OUTPUT

Indicates zone is disabled.

IsMuted

OUTPUT

Indicates zone is muted.

IsUnmuted

OUTPUT

Indicates zone is unmuted.

LoudnessIsOn

OUTPUT

Indicates zone loudness is enabled.

LoudnessIsOff

OUTPUT

Indicates zone loudness is disabled.

CurrentSource

OUTPUT

Indicates currently selected source. (see

Audio Control M6400 / M4800 / D4600

Crestron Driver User Guide

SourceSelect for value range).

CurrentVolume

OUTPUT

Indicates currently set volume. (see VolumeSet

for value range).

CurrentBass

OUTPUT

Indicates currently set bass. (see BassSet for

value range).

CurrentTreble

OUTPUT

Indicates currently set treble. (see TrebleSet for

value range).

CurrentSource

OUTPUT

Indicates currently selected source. (see

SourceSelect for value range).

Audio Control M6400 / M4800 / D4600

Crestron Driver User Guide

Grouping

When setting up groups, there is an option to lock the groups on the zone configuration

page:

It is recommended that you do not use this feature. If a group is locked and the group

volume +/- buttons are pressed, the device will only change the volume for the first zone in

the group. If a group is locked and the zone volume +/- buttons are pressed, the device will

change the volume for all grouped zones but will only feed back that the zone pressed has

changed.

Consequently, best practice for using this driver’s grouping feature are as follows:

If zones are grouped:

Only expose the group commands to the user (volume, bass, treble, switch, etc.) and do not

lock the groups.

If zones are not grouped:

Only expose the zone commands to the user for those specific zones.

Ce manuel convient aux modèles suivants

Autres manuels Audio Control Amplificateur

Audio Control

Audio Control SAVOY G4 Manuel utilisateur

Audio Control

Audio Control Savoy G3 Instructions de montage

Audio Control

Audio Control SAVOY Manuel utilisateur

Audio Control

Audio Control ACX-300.1 Manuel utilisateur

Audio Control

Audio Control FOUR.1i Manuel utilisateur

Audio Control

Audio Control ACX-600.6 Manuel utilisateur

Audio Control

Audio Control Architect 100 Instructions de montage

Audio Control

Audio Control ACX-600.1 Manuel utilisateur

Audio Control

Audio Control Avalon G4 Manuel utilisateur

Audio Control

Audio Control LC-1.800 Manuel utilisateur

Audio Control

Audio Control MP-200 Manuel utilisateur

Audio Control

Audio Control Architect 560 Manuel utilisateur

Audio Control

Audio Control LC-4.800 Manuel utilisateur

Audio Control

Audio Control Bijou 600 Manuel utilisateur

Audio Control

Audio Control Rialto 400 Manuel utilisateur

Audio Control

Audio Control ACM-1.300 Manuel utilisateur

Audio Control

Audio Control 960 961 Instructions de montage

Audio Control

Audio Control The Director M6800 Manuel utilisateur

Audio Control

Audio Control The Director D4400 Instructions de montage

Audio Control

Audio Control D-4.800 Manuel utilisateur

Audio Control

Audio Control ESP-3 Guide de démarrage rapide

Audio Control

Audio Control Architect 1160 Instructions de montage

Audio Control

Audio Control Director D3200 Manuel utilisateur

Audio Control

Audio Control Maestro M8 Manuel utilisateur

Manuels Amplificateur populaires d'autres marques

ASTRO

ASTRO HVO V40 P Manuel utilisateur

Marantz

Marantz SUPERSCOPE BLA-545 Instructions de montage

NAD

NAD CI980 Manuel utilisateur

Technics

Technics SE-CH770 Manuel utilisateur

Harman Kardon

Harman Kardon HK6300 Manuel utilisateur

NAD

NAD T975 Manuel utilisateur

McIntosh

McIntosh MA6850 Manuel utilisateur

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuel utilisateur

Viatron

Viatron Autrix Manuel utilisateur

GME

GME GA9800 Manuel utilisateur

Atlas

Atlas CP700 Manuel utilisateur

Roland

Roland KC-1000 Manuel utilisateur

Pyle

Pyle PFMRA350BW Manuel utilisateur

Advantage

Advantage S-250 Manuel utilisateur

IRT Electronics

IRT Electronics DVA-3007 Manuel utilisateur

Dimavery

Dimavery BA-100 Series Manuel utilisateur

Sony

Sony XM-S400D Manuel utilisateur

Schertler

Schertler ROY X Manuel utilisateur