1. GENERAL INFORMATION
2. UNPACKING YOUR SYSTEM
3. SERVICING
4. PRECAUTIONS
IMPORTANT
ELECTRICAL INFORMATION
MAINS POWER SWITCH
The AUDICA AVR-1 DVD/Receiver includes four system
components in one box - a DVD player, FM/AM radio, surround
sound decoder and 6 channel amplifier. In addition to theAVR-1
you will need a TV and a speaker system with between two and
sixchannels.Afull sixchannelspeaker systemisrecommended
todeliverthemostrealisticsurround-soundexperience.
Care must be taken whilst unpacking your system that no part is
damaged or lost. For an inventory of what should be supplied
with the system, please refer to system specifications on page
16. Retain packaging materials so the system can be re-packed
andshippedifnecessary.
Donotattempttoservicethisproductyourselfasopeningcovers
or panels may expose you to dangerous voltages or other
hazards.Referallservicingtoqualifiedpersonnel.
Where replacement parts are required be sure the service
technicianhasusedreplacementssupplied bythe manufacturer
or have the same characteristics as the original part. Use of
unsuitable parts could cause fire, electrical shock or other
hazardsandmayvoidanywarrantyorguarantee.
The technician must perform any safety checks to test the
performanceofanyrepairs.
Readtheseinstructions.
Keeptheseinstructions.
Heedallwarnings.
Followallinstructions.
Donotusethisapparatusnearwater.
Cleanonlywithaslightlydampcloth.
Donotblockanyventilationopenings.
Installinaccordancewiththemanufacturer'sinstructions.
Do not install or operate near any heat sources such as
radiators,stoves,orotherapparatusthatproduceheat.
Unplug this apparatus during lightning storms or when
unusedforlongperiodsoftime.
Referallservicingtoqualifiedservicepersonnel.Servicingis
requiredwhen theapparatushasbeendamaged inanyway,
such as the power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
notoperatenormally,orhasbeendropped.
Warning: To reduce the risk of fire or electrical shock, do not
exposethisproducttorainormoisture.Theproductmustnot
be exposed to dripping and splashing and no object filled
withliquidssuchasavaseofflowersshouldbeplacedonthe
product.
Nonakedflamesources suchas candles shouldbe placed
ontheproduct.
Caution: Changes or modifications not expressly approved by
the manufacturer could void the user's authority to operate this
device.
Caution: Usage of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardousexposure.
These labels tell you that the unit contains a Laser component.
Donotstareatthelaserlens.
This equipment has been tested and found to comply with the
limits for a Class B digital device pursuant to part 15 of the FCC
rules.Theselimitsaredesigned toprovide reasonableprotection
against harmful radiation in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communication. However, this is no guarantee that interference
will not occur in a particular installation. If this equipment does
causeharmfulinterference toradioor televisionreception,which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of the
followingmeasures:
Reorientorrelocatethereceivingantenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
fromthattowhichthereceiverisconnected.
Consultthe dealeroranexperiencedradio/TV technicianfor
help.
Mains Supply: The mains operating voltage of this unit is on the
ratingplateontherear.IntheUKthisis230/240V.
The AVR-1 is supplied with a power cord terminated with a UK
approvedmainsplug fittedwitha 3Afuse. If
The AVR-1 does not have a power
switch. If you need to switch off the mains power to the AVR-1,
remove the mains plug from the wall outlet. For this reason,
ensure that the mains plug remains easily accessible when
installingtheAVR-1.
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
thefuseneeds tobe
replaced, an ASTA or BSI approved BS1362 fuse rated at 3A
must be used. If you need to change
themainsplug,remove the fuseand
dispose of this plug safely
immediately after cutting it from the
cord.
Manufactured under license from Dolby Laboratories. “Dolby”,
“Pro-logic" and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license from Dolby Laboratories. Dolby,
and the double-D symbol are trademarks of Dolby Laboratories.
Additionally, softwareproductsrunning onacomputer mustalso
be marked with: Confidential unpublished works. Copyright
1992-2002DolbyLaboratories.Allrightsreserved.
Thisproductincorporatescopyrightprotectiontechnologythatis
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection
technologymustbeauthorizedby MacrovisionCorporation, and
is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reserve
engineeringordisassemblyisprohibited.
Dolby 5.1ch
DTS
copyright protection
Important Safety Information
3A FUSE
BS 1362
BROWN
(Live)
BLUE
(Neutral)
4
Class II construction double insulated. This
productmustnotbeconnectedtoearth.
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK)
This symbol indicates that dangerous
voltage constituting a risk of electric
This symbol indicates that there are
important operating and maintenance
instructions in the literature
