Aucma MetaFridge CFD-50 Manuel utilisateur

Rev. 20170523

MetaFridgeTM CFD-50

User’s Manual

All material that is labeled with ⚠may affect either product safety or user’s safety and should be handled with

caution.

⚠Please read the manual carefully before use

Keep the manual in a safe place for future reference

For safety purposes, please remove all package materials before use.

Contents

1Product Description ................................................................................................................. 3

2CFD-50 Description: ................................................................................................................. 4

3Transport and Handling Instructions ........................................................................................ 6

4Installation............................................................................................................................... 7

4.1 Preparation....................................................................................................................... 7

4.2 Positioning the CFD-50...................................................................................................... 7

4.3 Filling Instructions............................................................................................................. 8

4.4 Cooldown ....................................................................................................................... 10

5Use of the CFD-50 .................................................................................................................. 11

5.1 Temperature Display and Status LED............................................................................... 11

5.2 30 DTR (Daily Temperature Record) Display.................................................................... 12

5.3 Alarms ............................................................................................................................ 16

5.4 USB Download and 30 DTR reports ................................................................................. 16

6Maintenance.......................................................................................................................... 17

6.1 Daily maintenance tasks ................................................................................................. 17

6.2 Annual maintenance tasks .............................................................................................. 17

6.3 Cautions during maintenance: ........................................................................................ 17

7Safety Precautions ................................................................................................................. 18

8Troubleshooting..................................................................................................................... 19

9CFD-50 Parts and equipment list ............................................................................................ 21

10 CFD-50 Specification........................................................................................................... 21

11 CFD-50 Disposal and Recycle Guideline .............................................................................. 21

12 Warranty............................................................................................................................ 22

1Product Description

The MetaFridgeTM CFD-50 is a WHO PQS certified vaccine refrigerator that maintains a temperature between 2-8 °C

with multi-day holdover during extended power outages. It includes integrated power protection, a display showing

30 days of temperature and alarm history, onboard logging of temperature and diagnostic data, and it supports

remote monitoring of performance data.

CFD-50 standard features:

50-liter storage compartment

Integrated power management system defending against voltage spikes and brown-outs

Integrated voltage stabilization to utilize a wide range of input voltages (110 - 230 VAC)

Normal operation in a minimal mains grid access environment (maintains temperatures with as little as 3

hours of power a day on average)

120 hours of holdover at constant ambient temperature of 43 °C (192 hours at constant ambient

temperature of 25 °C)

Integrated 30-day temperature record (DTR) display and downloadable temperature history

Integrated plastic base prevents corrosion from damp floor

Remote temperature monitoring feature is available upon request

2CFD-50 Description:

○

A Vaccine chamber

○

B Vaccine chamber door

○

C Vaccine chamber door gaskets

○

D 30-DTR display

○

E Temperature display

○

F Water tank lid latch

○

G Water tank lid

○

H Electronics enclosure

○

I USB port

○

J Condenser guards

○

K Vaccine chamber door latch

○

L Lifting handles

○

M Integrated plastic base

○

N Ventilation cover

○

O Condensation drain channel

○

P External condenser

○

Q Thermal safety shut-off

(mechanical thermostat)

○

R Water tank lid hinge

3Transport and Handling Instructions

a. Leave the CFD-50 in its protective packaging as long as possible to protect from damage

Cutouts in the cardboard allow access to the manufacturer’s label for inspection and to the handles

for lifting without removing the packaging.

b. Transport the CFD-50 vertically when possible:

If transport on the side is necessary, pay attention to “This side up” stickers on the packaging and

make sure package is in the correct orientation to prevent damage.

c. Keep door closed when moving the CFD-50

d. If the CFD-50 needs to be moved after initial installation, remove the water from the water tank using a

siphon hose before moving.

e. When using the handles for lifting, keep one hand towards the top of the unit to prevent tipping.

f. Avoid any excessive force to prevent damage to the CFD-50.

Avoid any excessive force especially towards the upper and lower doors, front lower cover, and

display cover, in order to prevent damage.

Do not lift the CFD-50 from the doors, grates, or condenser guards.

⚠Heavy object warning. To avoid injury, use lifting aids and proper lifting

techniques when moving the CFD-50

4Installation

4.1 Preparation

a. Read the instruction manual carefully.

b. Remove all packaging materials, including foam base and tape.

Discard plastic wrappers and bags safely, to avoid suffocation of children.

c. Inventory accessories and installation tools to make sure there are no missing parts.

4.2 Positioning the CFD-50

a. Place the CFD-50 on a flat and solid ground and ensure the unit is level.

b. No pallet is required: CFD-50 has an integrated plastic base.

c. Position the CFD-50 near an accessible electrical outlet; the power cord length is 2 meters.

d. Position the CFD-50 away from direct sunlight and any source of heat (e.g. gas stove, fireplace, etc.).

e. CFD-50 must not be placed in or around flammable or corrosive gases that could cause an explosion or

electric shock.

f. In order to prevent rust or electrical leakage, the CFD-50 should not be placed in a high humidity

environment or in a location where it could be splashed with water or rain.

g. Position the CFD-50 in a well ventilated area and make sure there is a minimum of 10 cm of empty space

around the sides and back of the unit. The door latch must be accessible and the door must be able to open

freely to at least 90°.

h. Allow a minimum of 60 cm clearance above the CFD-50 for accessing the water tank lid.

4.3 Filling Instructions

Filling instructions can be also be found on the inside of the water tank lid.

Step 1: Unlatch the water tank latch and fully open the

water tank lid. Turn the fill plug counterclockwise to

loosen and remove the cap. Keep the plug on top of

the water tank while filling so it does not get lost.

Step 2: A funnel is shipped inside of each CFD-50.

Install the funnel securely in the fill hole. Fill a bucket

with clean drinking water. If there is no local source of

clean drinking water, use bottled water.

Step 3: Pour 32 L of water into the water tank through

the funnel. If needed, use a stool to properly reach the

funnel and be able to look down into the fill tube to

check the water level.

⚠CFD-50 must be properly filled with clean drinking water before operation and use.

During the filling process, use care and common sense and follow all local safety precautions

guideline must be taken into consideration.

Step 4: While filling, stop periodically to check the water

level by looking down into the tube with a light. The

water should just reach the bottom of the fill tube.

Do not insert sharp objects into the tube or you may

damage the refrigerator evaporator.

Step 5: If you accidentally overfill the water tank,

remove excess water using a piece of tubing as a siphon.

Adjust the water level by adding/removing water until

the water level is at the bottom of the fill tube.

Too little water will reduce holdover time; too much

water may damage the unit.

Step 6: When water is at the correct level, replace the

fill plug and tighten until the plug is entirely within the

lid and will not interfere when the top lid is closed.

⚠Do not overfill the CFD-50 (Figure G).

Remove excess water if overfilling occurs (Figure H).

Figure G Figure H

4.4 Cooldown

Step 1: Power-on the CFD-50 by plugging the power cord into a dedicated outlet.

Step 2: Once powered on, the temperature display will show the temperature of the vaccine storage chamber.

The compressor will start after a delay of 5-10 minutes.

Step 3: Use a #2 Philips screwdriver to open the front electronics compartment.

a. Connect the main battery.

b. Open the storage cabinet door to check if interior light is on and close the door. To enable or disable

interior light, refer to the technical manual.

Step 4: Do not use the CFD-50 until the display indicates that the vaccine storage temperature is below 8 °C and the

30 DTR indicates at least 2 days of remaining holdover, which usually takes <6 hours with continuous power

availability.

⚠Ensure that the water tank has been filled to the correct level before plugging

in the CFD-50

⚠In the case of intermittent power (≤4 hours of power each day) and high

ambient temperature environment, the CFD-50 may require 2 days after initial

installation to reach full holdover capability.

⚠During the initial cooldown, do not use the CFD-50 until the display indicates

that the vaccine storage temperature is below 8 °C and the 30 DTR indicates at

least 2 days of remaining holdover.

Table des matières

Manuels Réfrigérateur populaires d'autres marques

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Manuel utilisateur

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Manuel utilisateur

Sharp

Sharp SJ-BA31IEXW2-EU Manuel utilisateur

CORBERO

CORBERO CC2300MCW Manuel utilisateur

KitchenAid

KitchenAid 2205264 Manuel utilisateur

Stengel

Stengel KU 1101 A++ Manuel utilisateur

NEFF

NEFF KI181 Series Manuel utilisateur

Hoshizaki

Hoshizaki Reach-In Manuel utilisateur

Amana

Amana ASD2524VES00 Manuel utilisateur

BOMANN

BOMANN KGC 213 Manuel utilisateur

Danby

Danby DAR044A1SLDD Instructions de montage

Samsung

Samsung RF323TE Manuel utilisateur

Beko

Beko CSA31022 Manuel utilisateur

IKEA

IKEA FROSTIG C 185 E Manuel utilisateur

Electrolux

Electrolux ER 6821 D Manuel utilisateur

True

True TS-28 Manuel utilisateur

Frigidaire

Frigidaire FSC23R5DW9 Manuel utilisateur

Beko

Beko LSP4579W Manuel utilisateur