ATV HDV2212MB Manuel utilisateur

INSTRUCTION MANUAL

FULL HD DOME CAMERA

Please read this manual thoroughly before use and keep it handy for future reference.

FCC COMPLIANCE STATEMENT

CE COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

FCC INFORMATION : This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

CAUTION : Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

WARNING : This is a Class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate measures.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

7. Only use attachments/accessories specified by the manufacturer.

8. Use only with the cart, stand, tripod, bracket, or table specified by

The manufacturer, or sold with the apparatus. When a cart is used,

Use caution when moving the cart/ apparatus combination to avoid

Injury from tip-over.

9. CAUTION –THESE SERVICING IN STRUCTIONS ARE FOR USE BY QUALIFIED

SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT

PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING

INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.

10. Use satisfy clause 2.5 of IEC60950-1/UL 60950-1 or Certified/Listed Class 2 power

source only.

11. Indoor use only.

EXPLANATION OF GRAPHICAL SYMBOLS

The lighting flash with arrowhead symbol, within an equilateral triangle, is

Intended to alert the user to the presence of uninsulated “dangerous voltage”

within the product`s enclosure that may be of sufficient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the product.

CONTENTS

•INTRODUCTION 5

•CONNECTION & VIDEO OUT CHECK (CVBS) 6

•LENS ADJUSTMENT 6

•CONTENTS OF PACKAGE 6

•BASE INSTALLATION 7

•STRUCTURE OF THE SETUP MENU 8

•DC AUTO IRIS LENS 16

•SPECIFICATIONS 17

•EXTERNAL DIMENSION 18

INTRODUCTION

The 1/2.9”2.1M Full HD CMOS camera, especially for closed circuit television

CCTV and security surveillance application.

Features:

•High performance SONY 1/2.9” 2.1M EXMOR CMOSTM

•1.0 lux(Color), 0 lux(BW, IR LED ON)

•Auto electronic shutter [1/60(1/50) ~ 1/50,000] and manual electronic shutter modes

•BLC (Back-light compensation)

•Auto and manual white balance modes (ATW/AWC/Manual/AWB)

•Day & Night (ICR) : Auto / Color / BW

•OSD (on screen display)

•3 DNR (Digital Slow Shutter)

•DWDR

•Smart IR

•24EA, 850nm IR LED

•IR Range distance up to 25M

•Privacy mask Function (4 zone)

•Motion Detection

•Defog

•HSBLC

•Operates in DC 12V ± 10%

•Use Certified / Listed Class 2 Power source only

IMPORTANT : The user of this camera is responsible for checking and

complying with local, state, and federal laws and statutes concerning the

recording and monitoring of audio signals.

CONNECTIONS & VIDEO OUT CHECK(CVBS)

①Power : 12V DC input, Use Certified/Listed Class 2 power source only.

* If using DC 12V power adaptor, use power supply capable of supplying 6 Watts.

②Video : BNC connector used to connect the camera to a DVR, etc.

③SPOT : Spot connector used to check video output.

④Video Out Mode (HD↔CVBS) : Select Between the video output mode from the

Video(BNC) & SPOT

LENS ADJUSTMENT

Field of View : Adjust setting from Tele (T) to Wide (W) field of View

Focus : Adjust lens focus from near (N) to infinity (∞)

CONTENTS OF PACKAGE

The package contents the following.

Camera in Housing…………………………………………….….1

Instruction Manual (This Document)………………………….. 1

Accessory Kit for Installing……………………………………… 1

Drilling guide label………………………………………………...1

BASE INSTALLATION

1. Make mounting holes and cable hole in

the place (ceiling or wall) to which this

dome camera is installed using the

Drilling guide label.

2.Drill the mounting location, using the Drilling guide.

3.Attach the housing to the ceiling using

suitable fasteners, PTS1 5x30 screws

are supplied only use if they are suitable.

4. Tighten a mounting screws.

STRUCTURE OF THE SETUP MENU

<SETUP>

LENS

EXPOSURE

BACKLIGHT

WHITE BAL

DAY&NIGHT

IMAGE

FUNCTION

SYSTEM

EXIT

<LENS>

MANUAL

SHUTTER

AGC

SENS-UP

BRIGHTNESS

D-WDR

DEFOG

RETURN

OFF

BLC

HSBLC

<WHITE

BAL>

ATW

AWC->SET

INDOOR

OUTDOOR

MANUAL

AWB

<DAY&NIGHT

AUTO

COLOR

B&W

<IMAGE>

SHARPNESS

LSC

D-EFFECT

RETURN

DNR

MOTION

PRIVACY

DEFECT DET

RETURN

CAMTITLE

MONITOR

VIDEO OUT

LANGUAGE

COMET

RETURN

<AF>

AF MODE

ONE SHOT AF

TDN AF

LENS LINT

RETURN

<RESET>

SAVE&END

RESET

NOT SAVE

LENS

The EXPOSURE menu is used to set the automatic light control method for the camera.

It provides the ability to adjust the SHUTTER speed. AGC SENS-UP, BRIGHTNESS, D-WDR, and

DEFOG functions of the camera.

1) DC Select the DC mode. ▶INDOOR, OUTDOOR

Select the DC iris speed ▶0~15

2) MANUAL Select the MANUAL mode

<LENS> Mode

EXPOSURE

The EXPOSURE menu is used to set the automatic light control method for the camera.

It provides the ability to adjust the SHUTTER speed, AGC, SENS-UP, BRIGHTNESS,

D-WDR, and DEFOG functions of the camera.

1) SHUTTER Select the SHUTTER speed level.

▶Auto, 1/60(50), FLK~1/240 –1/50000, x2 ~ x30

2) AGC Adjust the Auto Gain Control level. ▶OFF, Auto (x2 ~ x30)

3) SENS-UP Select the Digital Slow Shutter level. ▶OFF, AUTO (x2 ~ x30)

4) BRIGHTNESS Adjust the BRIGHTNESS level. ▶0 - 100

5) D-WDR Select the Digital WDR. ▶AUTO, ON(level 0~8), OFF

6) DEFOG Select the DEFOG mode.▶AUTO, ON(level 0~8), OFF

POS/SIZE Adjust the window position & size

GRADATION ▶0 ~ 2

DEFAULT Initialize the setting values

MAIN MENU

OUTDOOR MODE

DC LENS MODE

LENS

DC

MIN SHU.

1/25(30)

EXPOSURE



MODE

OUTDOOR

MAX SHU.

1/2000

BACKLIGHT

OFF

IRIS SPEED

 8

RETURN

RET

WHITE BAL

ATW

RETURN

RET

DAY&NIGHT

AUTO

IMAGE



FUNCTION



SYSTEM



EXIT

SAVE&END

NOTE Choose when installed in an external DC mode outdoor.

Table des matières

Autres manuels ATV Caméra de sécurité

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur