ATV BHR212MR Manuel utilisateur

600TV Lines Super

High Resolution Color Camera

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE

VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT.

CAUTION

EXPLANATION OF GRAPHICAL SYMBOL

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to

alert the user to the presence of un-insulated "dangerous voltage" within the product's

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the

literature accompanying the product.

PRECAUTIONS

Safety

Should any liquid or solid object fall into the cabinet, unplug

the unit and have it checked by

qualified personnel before operating it any further.

Unplug the unit from the wall outlet if it is not going to be used

for several days or more.

To disconnect the cord, pull it out by the plug. Never pull the

cord itself.

llow adequate air circulation to prevent internal heat build-up.

Do not place the unit on soft surfaces (rugs, carpets, sofas,

etc.) or near materials (curtains, draperies) that may block the

ventilation holes.

Height and vertical linearity controls located on the rear panel

are for special adjustments by qualified personnel only.

Installation

Do not install the unit in an extremely hot or humid

place or in a place subject to excessive dust,

mechanical vibration.

The unit is not designed to be waterproof.

Exposure to rain or water may damage the unit.

Cleaning

Clean the unit with a slightly damp soft cloth.

Use a mild household detergent. Never use strong

solvents such as thinner or Benzene as they might

damage the finish of the unit.

Retain the original carton and packing materials for

safe transport of this unit in the future.

INTRODUCTION

Camera Model Features:

●1/3" Sony Super HAD CCD

●600TVL colour & 620TVL monochrome resolution

●0.1Lux (Colour), 0.04 Lux (B/W), 0.003Lux (Low-shutter) @ F1.2, 50IRE Sensitivity

(sense-up x256 – 0.0004Lux (colour), 0.0001Lux (B/W)

●Auto electronic shutter and manual electronic shutter modes

●OSD (On Screen Display)

●3DNR function

●DRC (Dynamic Range Control)

●Auto and manual white balance modes

●BLC (Back Light Compensation)

●24no Privacy Zones (B/W, Colour, Mosaic)

●Functions (Nega/Posi, Sharpness, Mirror, Zoom, Pan/tilt)

●AGC (Auto Gain Control)

●Sense-up (x2~ 256)

●Operates on 12VDC or 24VAC (-10% ~ +15%)

●Use Certified / Listed Class 2 power source only

●In DC power, use the Adapter more than DC 12V 2.5A Capacity.

IMPORTANT: The user of this camera is responsible for

checking and complying with local, state, and federal laws

and statutes concerning the recording and monitoring of

audio signals.

CAMERA FIXING

CAMERA ADJUSTMENT

The camera is supplied with a remote control set up tool. To connect the remote control

to the camera, first remove the Remote control port cap at the rear of the camera:

Use the 3 location holes

around the base of the

bracket to secure the camera

to a wall or ceiling using fixing

suitable to the type of surface

Connect the remote control using the 6 pin din connector end to the socket within the

camera:

Connect the BNC to a set up monitor to view the picture and On Screen Menus.

To Enter the menus press the button on the remote control.

To Navigate the menus, move the button left/Right/Up and Down, press the button to

Enter.

RET – takes you back a step in the OSD

END – saves changes and exits from the OSD

CAMERA CONNECTION

CAMERA SET UP – OSD

EXPOSURE

WHITE BALANCE

DAY / NIGHT

PRIVACY

DISPLAY

SYNC

INITIAL

EXIT

LENS

BRIGHTNESS

BACKLIGHT

SHUTTER

AGC

SENSE UP

ECLIPSE

3D-DNR

DRC

RETURN

D/N MODE

AUTO LEVEL

FILTER DLY

SENSOR IN

BURST

RETURN

AREA

MASK

MODE

LEVEL

TOP

DOWN

LEFT

RIGHT

RETURN

TITLE

RETURN

<SYNC>

AUTO/INT

RETURN

CANCEL

RETURN

<EXIT>

NB: selecting

RETURN takes

you back to the

menu, CENTRE

push on the tact

switch takes you

our of OSD menu

structure. OSD

times out after

approx 60 seconds

WB MODE

RED CONT

BLUE CONT

PUSH AUTO

RETURN

TITLE

NEGA/POSI

SHARPNESS

MIRROR

ZOOM

PAN/TILT

PHASE

RETURN

OSD MAIN SCREEN

All operation is via the tact switch

- [CENTER] Turn OSD menu ON or OFF

- [UP]/[DOWN] UP or DOWN of Cursor

- [LEFT]/[RIGHT] to go into SUB MENU or change setting

Press the [LEFT] or [RIGHT] button to access the "EXPOSURE" mode.

1) LENS DC, ELC can be selected.

2) BRIGHTNESS 0 to 60 can be selected.

(Level setting is available in both DC & ELC mode).

3) BACKLIGHT ON or OFF can be selected. (BLC level, location)

(allows the camera to maintain proper exposure within a

certain area, even if the lighting level changes).

4) SHUTTER 1/50, FLC, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000

1/30000, 1/60000, 1/120000 sec.

(this is only selectable when lens is set to DC mode – FLC reduces

screen flickering caused by discordance of frequency and lighting).

5) AGC AGC OFF, LOW, MID, HIGH can be selected.

As the level of gain increases, the screen gets brighter and

the level of noise also increases.

6) SENSE UP OFF, x2, x4, x8, x16, x32, x64, x128, x256 can be selected.

(SENSE UP helps maintain a bright, clear screen image

by automatically detecting the change in the level of light)

7) ECLIPSE ON or OFF can be selected.

(This function improves the identification capability of

subjects facing a brightly lit situation by filtering out the

strength of the light).

8) 3D-DNR OFF, LOW, MID, HIGH can be selected.

(Reduces the noise on the screen under low light

condition/AGC)

9) DRC OFF, ON can be selected.

(Visibly brightens the subject in a dark area)

10) RETURN Return to MAIN MENU.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ATV Caméra de sécurité

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur