ATV Falcon 4-Channel Manuel utilisateur
Falcon
Digital Video Recorder
4-, 9-, and 16-Channel Models
Remote Administration System
User’s Manual
RAS Admin
RAS Watch
RAS Search
Remote Administration System
3
Chapter 1 —Overview
1.1 In This Manual
This manual describes the procedures for operating Remote Administration System software
(RAS) designed for the digital video recorder (DVR).
1.2 Overview
The RAS consists of RAS Admin (Administration), RAS Watch and RAS Search programs.
• RAS Admin: Main administration program
• RAS Watch: Remote surveillance program
• RAS Search: Remote search program
Each program may be selected from the Windows task bar or the 3-button Program GUI.
1.3 RAS Features
The RAS program is the integrated software that controls system management, video
monitoring and image playback of multiple remote DVRs. The RAS offers the following
features:
• Check and report on the DVR status at a remote site
• Notification of the event detection from remote sites
• Remote monitoring of live camera images
• Time-lapse and event search of recorded images
• Remote software upgrades and system programming
User’s Manual
4
1.4 Product Information
Product Components
• User’s Manual(This Document)
• Installation Diskettes (2ea)
System Requirements
• Operating System: Microsoft Windows 98, Microsoft Windows ME, or Microsoft
Windows 2000
• CPU: Intel Pentium II (Celeron) 266MHz or higher
• RAM: 64MB or higher
• VGA: AGP, Video RAM 8MB or higher (800x600, 24bpp or higher)
Remote Administration System
5
Chapter 2 —Installation & Operation
2.1 Installing Procedures
CAUTION: If an older version of RAS software has been already installed on your
computer, you should uninstall the older version first.
NOTE: Under the Start menu in Windows, go to Settings and then to Control Panel.
Double click the Power Optionsto evoke the Management Properties dialog box. Select
Never for the Turn off monitor and the Turn off hard disks options.
1. Insert the installation diskette 1/2.
2. Run the Setup.exe file.
3. When the following dialog box appears, click Next.
4. Click Install.
User’s Manual
6
5. Follow the instructions to insert the installation diskette 2/2 as required.
6. Make sure Yes, restart the computer now is checked,and then click Finishto allow the
system to reboot. This completesthe installation.
2.2 Operating Procedures
After installing the RAS software, you will find the IRASServer icon on the desktop. Run
the RAS program by double clicking the icon. The main administration program, RAS Admin
window will appear. To activate one of the other programs using the 3-button GUI, click the
right button when the cursor is on top of the main displayed GUI. The following 3-button
toolbox is shown.
Each icon represents RAS Admin, RAS Watch, and RAS Searchas shown from the left. To
exit and close the RAS program, click the .
Remote Administration System
7
Chapter 3 —RAS Admin
3.1 Description
The RAS Admin, the main administration software of the RAS provides reporting functions
including a live system status report and search, an event log and a system log search, and
allows programming of remote DVR. The Graphical User Interface (GUI) oftheRAS Admin is
shown below, and the description of each GUI area follows.
• Remote Site List: Displays the list of remote sites registered in the RAS Admin.
• Local Setup Button: Allows programming the RAS Admin.
• System Log Button: Displays the system log.
•Function Buttons: Includes Connectbutton, and Watchand Searchprogram buttons, and
Setup, System Log, and Event Log buttons for a remote site.
• Close Button: Closes the RAS program.
•StatusWindow: Displays the status of the remote DVR currently connected (event detection,
alarm out, system check, record period, and version information).
• Batch Job Buttons: Includes Batch Job Setup and Batch Job Log buttons.
• Batch Job Information Window: Displays the current batch job information.
•Emergency Event Buttons: Includes Emergency Report button, and Watchand Search
program buttons.
User’s Manual
8
• Emergency Event List: Displays the event(s) that were called back from individual remote
site (LAN connection only). The description of event icons and their meanings follow:
: Normal Event
: Emergency Event (preset to be notified at the remote DVR)
: Motion Detection
: Video Loss
: Alarm In
: Text In
NOTE: Event notification for Text In may not be supported, depending on the
specification of the remote DVR.
3.2 Functions of the RAS Admin
Local Setup Button
Initiatesprogramming for the system operation and remote site configuration.
uSystem
Set up the date/time format for the RAS, the modem connection information for remote access,
the system password,and display option.
Remote Administration System
9
• Date/Time Format: Set the date/time format.
• Dial-up Network: Select Use modem if you want to use the internal modem or an external
modem for remote access.
•Security Options: Set up the password if password confirmation is required Before setup,
Before startup, or Before shutdownthe RAS. Click the Change button to change the
password. The password can be composed of up to eight digits or alphabetic characters.
•Display Option: Set up the display acceleration.
–None: Not using the display acceleration.
–Normal: Using the display acceleration (DirectX).
–Full: Using the display acceleration (DirectX Video Memory).
NOTE: The image cannot be displayed properly, depending on the specification of your
PC. In this case, lower the level of the display option.
uRemote Site
Configure the connection list for remote access.
• Add: Click theAdd button and enter the information of the remote site to register. Enter a site
name and the IP address of the remote site (modem phone number for dial-up connection),
acquired from your network administrator.If you have entered a user ID and a password of
the remote site for remote access, the site will be connected automatically without a dialog
box asking for a password.
NOTE: Up to 32 characters may be entered for the site name and telephone number, and
eight characters entered for the password.
User’s Manual
10
NOTE: The box beside User ID can be disabled, depending the RAS software version.
For the effective management of multiple remote sites, it is suggested the site be assigned to a
Reference Group.Click the Add button to make a new reference group. The Add Group
dialog box appears. Enter a group name to register, and then click the OK button.
•Change: Select the group or the site to change and click the Change button. And then
change the site information.
•Remove: Select the group or the site to remove and then click the Remove button.
System Log Button
Displays the system log, batch job log,and emergency event log information according to the
search condition.
uSystem
Displays the system log information of the RAS. If the user sets the period of interest and clicks
the Find button, the system log entries within the period are displayed in the list.
Remote Administration System
11
•From: If this box is checked, search from the first system log. If you want to a specific
starting date/time, remove a check and then set the desired date/time.
•To: If this box is checked, search until the last system log. If you want to a specific ending
date/time, remove a check and then set the desired date/time.
•Find: Displays system log entries within preset period.
•Save: Saves the log information to the text file.
•Print: Prints the log information out.
•Close: Closes the Log dialog box.
uBatch Job Log
Displays the batch job log information of the RAS. If the user sets the period of interest and
clicks the Find button, the batch job log entries within the period are displayed in the list.
Ce manuel convient aux modèles suivants
5
Table des matières
Manuels Logiciel populaires d'autres marques
PS Audio
PS Audio PowerPlay Manuel du propriétaire
Brady
Brady LOCKOUT PRO 3.0 Manuel de service
Avaya
Avaya Interaction Center Manuel utilisateur
Texas Instruments
Texas Instruments TI-83 Plus Silver Edition Manuel
Novell
Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur
Oracle
Oracle Application 9i Manuel utilisateur
Acer
Acer RDM Manuel utilisateur
Canon
Canon Vixia HF21 Manuel utilisateur
Canon
Canon ZR950 Manuel utilisateur
Samsung
Samsung Auto Backup Manuel utilisateur
Polycom
Polycom Vortex EF2201 Instructions d'installation et d'utilisation
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manuel utilisateur