ENGLISH Translation
1 Introduction
Nußbaum products are a result of many years
of experience. A high quality standard and su-
perior concept guarantees you reliability, long
lifetimes and economical operation. To prevent
unnecessary damage and hazards, read this ope-
rating manual carefully and always comply with its
contents.
!Any other use, or use beyond purpose is
considered improper.
!Otto Nußbaum GmbH & Co.KG is not liable for
any resulting damage. The operating compa-
ny alone carries the risk.
Proper use also includes:
Adherence to all instructions in this operating
manual.
Compliance with inspection and maintenance
work and the inspections stipulated.
The operating manual is to be followed by all
personnel working on the system. This is notably
with regards to Section 3 „Safety conditions.“
In addition to safety information from the
operating manual, comply with rules and regula-
tions at the location of use.
Proper system handling.
Operating company obligations:
The operating company is obliged to only permit
personnel to work on the system who
Understand the principle regulations about work
safety and accident prevention and who have
been trained in working with the system.
Have read the safety section and warning infor-
mation in this operating manual, have under-
Hazards in working with the system:
Nußbaum products have been designed and
built to state-of-the-art and to recognized safety
standards. However, improper use may lead to
hazards to life and limb of the user or result in
property damage.
The system may only be operated
For proper intended use
If it is technically in perfect condition
Organizational measures
The operating manual is always to be kept ready
at the location of use of the system.
Supplemental to the operating manual, refer to
and comply with generally valid legal and other
binding regulations for accident prevention and
for environmental protection.
Check occasionally that personnel have an
awareness of hazards and safe work in compli-
ance with the operating manual!
Use personal protective equipment as needed
or required by regulations.
All safety and hazard information on the system
is to be kept in a legible condition!
-
cations of the manufacturer. This is only guaran-
teed for original parts.
Deadlines pre-set or given in the operating
manual for repeating tests / inspections must be
followed.
Maintenance work, error removal
Comply with pre-determined setting, main-
tenance and inspection work and intervals
in the operating manual, including details for
may only be done by specialists who have parti-
cipated in a special factory training.
Guarantee and liability
In principle, our „General sales and supply con-
ditions“ apply.
Guarantee and liability claims for personal and
property damage are excluded if due to one or
more of the following causes:
Improper use of the system.
Improper assembly, commissioning, operation
and maintenance of the system.
Operating the system with defective safety de-
vices or improperly attached or non-functional
safety and protection devices.
Non-compliance with information in the
operating manual in terms of transport, storage,
assembly, commissioning, operation, mainte-
Independent construction changes to the sys-
tem.
Independent changes to the system (e.g. drive
ratios: power, rotation speed, etc.)
