ATSS INFORMER Manuel utilisateur
INFORMER
USER MANUAL
FEATURES INFORMER
ŸEight Input Zones
ŸEach Input Can Be Assigned To A Separate User
ŸEmergency Alert Switch.
Ÿ8 Individual Sms Alert For Each Zone.
ŸBuilt-In Gsm Communicator
ŸStores 4 Users & 1 Admin Contact No.
ŸSms and/or Calls To 5 Authorized Users
ŸEditable 15 Bit Sms Alert Message
ŸZone - Open, Close Or Both Instant Alert
Ÿ2 Ways Of Control: Sms
ŸLED Indicators For Network Signal & Status.
ŸZone Arm/Disarm Through Sms/Android Apps.
ŸCompact Design
Arming / Disarming
through SMS
Mobile
Call Alert
1 Trigger
Store 4 Phone
Numbers
EMERGENCY
Switch
Introduction
LED INDICATORS & EMERGENCY SWITCH
Informer is a Eight trigger GSM communicator, which can
send SMS and make dummy call when trigger is in
open/close condition. This device can be controlled through
SMS & Android application.
USER MANUAL INFORMER
1 2 3456 7 8
PW ST NW
2
3
1
4
USER MANUAL INFORMER
LED INDICATORS & EMERGENCY SWITCH
REGISTER ADMIN
ŸYou would get a reply message
“Admin change success”
which confirms the process.
ŸType 121212 and send SMS to
Informer number.
121212
NA:Admin change SUCCESS
1. LED (1 -8)– Zone indication LED
2. LED PW – Power indication LED
3. LED ST – Status LED
4. LED NW – Network LED
ŸLED will glow when Zone is in open condition.
ŸWill glow when system is ON.
ŸWill blink while system is sending & receiving SMS.
ŸWill be in green color in Deactive state.
ŸWill be in Red color in Active state.
ŸWill blink slowly , when network is good
ŸWill blink fast, when network is bad.
SET BALANCE COMMAND
ŸYou would get a reply message
with balance details.
ŸType BAL*xxx# and send to
Informer from Admin number.
(set balance command
according to your network).
BAL*123#
ŸOnly Admin number can change/access settings of Informer.
BL:MA
USER MANUAL INFORMER
ADD PHONE NUMBERS
ŸType PHO2 <Phone number>
and send to Informer from Admin
number.
ŸLikewise Type PHO3,PHO4,
PHO5 and add other numbers.
ŸYou would get a reply message P2 success which confirms
the process
ŸLikewise you would get P3, P4, P5 SUCCESS message when
adding those numbers.
SET ALERT MESSAGE
ŸLikewise add MSG2, MSG3,
MSG4, MSG5, MSG6, MSG7,
MSG8.
ŸYou can add 8 messages for eight
zones.
ŸType MSG1 <12-text message>
and send to Informer from Admin
number.
MSG1 12-TEXT-MESSAGE
ŸYou would get reply message
M1:SUCCESS which confirms
the process.
M1:SUCCESS
MSG2 12-TEXT-MESSAGE
MSG8 12-TEXT-MESSAGE
PHO2 xxxxxxxxxx
P2: SUCCESS
USER MANUAL INFORMER
SET ALERT CONDITION
OPEN ALERT
ALT OOOOOOOO
SALT:OOOOOOOO:SUCCESS
ŸFor Open alert in all ZONES ,Type
ALT OOOOOOOO and send to
Informer from Admin number
ŸYou would get a reply message
SALT:OOOOOOOO:SUCCESS
which confirms the process.
CLOSE ALERT
ALT CCCCCCCC
SALT:CCCCCCCC:SUCCESS
ŸFor Close a lert , Type A LT
CCCCCCCC and send to Informer
from Admin number
ŸYou would get a reply message
SALT:CCCCCCCC:SUCCESS
which confirms the process.
BOTH OPEN&CLOSE ALERT
ALT SSSSSSSS
SALT:SSSSSSSS:SUCCESS
ŸFor Both Open &Close alert, Type
ALT SSSSSSSS and send to
Informer from Admin number
ŸYou would get a reply message
SALT: SSSSSSSS: SU CC ES S
which confirms the process.
USER MANUAL INFORMER
SET ALERT CONDITION
ALT CSCSOCOC
SALT:CSCSOCOC:SUCCESS
ŸTo set different alert conditions
for each Zone:
Example: If you want
Zone 1 - close (c)
Zone 2 - both (s)
Zone 3 - close (c)
Zone 4 - both (s)
Zone 5 - open (o)
Zone 6 - close (c)
Zone 7 - open (o)
Zone 8 - close (c)
Just Type ALT CSCSOCOC
and send to Informer
from Admin
number. (Likewise you can
set alert conditions which
you want for each ZONES.)
ŸYou would get a reply message
SALT:CSCSOCOC:SUCCESS
Which confirms the process.
USER MANUAL INFORMER
SET ALERT TYPE
BOTH CALL & SMS ALERT
CS YY
CS:SUCCESS
ŸFor both call & sms alert,Type CS
YY and send to Informer from
Admin number
ŸYou would get a reply message
CS SUCCESS.
ONLY CALL ALERT
CS YN
CS:SUCCESS
ŸFor only call alert,Type CS YN
and send to Informer from Admin
number
ŸYou would get a reply message
CS SUCCESS.
ONLY SMS ALERT
CS NY
CS:SUCCESS
ŸFor only sms alert, Type CS NY
and send to Informer from Admin
number
ŸYou would get a reply message
CS SUCCESS.
USER MANUAL INFORMER
ASSIGN PHONE NUMBERS TO ZONES.
ŸType ZP and send SMS to
Informer number to know status
of Phone numbers assigned to
zones.
ŸYou would get a reply message
with status.
ŸAs Default Phone number 1 will
be assigned to all eight zones &
rest of phone numbers would be
empty without being assigned.
ŸTo change Phone Numbers 1's
Default assigned zones,
ŸType ZP1 <12345678> (You
can select the Zones which you
want to assign to Phone number
1).
ŸExample: If you want Phone
number 1 to get alerts of zones
2,3,4,8.
o Type ZP1 2348 and send
to informer number.
ŸYou Would Get reply Message
SZP:SUCCESS Which Confirms
the process.
ZP
ZP:
P1 - 12345678
P2 -
P3 -
P4 -
P5 -
SZP:SUCCESS
ZP1 2348
The Device has memory available to store 5 Phone numbers
which includes 1 admin number. You can Assign all 5 Phone
Numbers to Zones which you wish in 8 zones which are
available. Once set, the Phone Numbers will receive alerts
from those particular zones. You can assign multiple phone
numbers with same zones also.
Table des matières
