Description：N –– No. of the track fro 1 to 6.
Function：Stop the No. N track or stop tour by pushing the joystick.
8. Cancel Cruise Track: [SH T]+[N]+ [ FF] (Pressing [ FF] down until “ Clear Tour K ”appears)
Display：Input Tour No：01
Description：N –– No. of the track fro 1 to 6.
Function：Delete the No. N track
9. Auto Pan ON (Operation of NEON, SAMSUNG Protocol): [AUT ]+[P1]+[ N]+[P2]+[ FF]
Display：Input 1st No：001
Description：P1–––– the starting scan No. of preset point fro 1 to 128, which should be set already.
Display：Input 2nd No：002
Description：P2–––– the ending scan No. of preset point fro 1 to 128, which should be set already.
If P1 = P2 or P1 and P2 are coincided, the speed do e will ake scan in range of 360°.
Note:
(1) For PELCO-D and PELCO-P Protocols the way of operation is as follows:
Set the Starting Scan Position: Transfer the speed do e to the starting scan position, operation
[AUT ]+[ N]
Set the Ending Scan Position: Transfer the speed do e to the ending scan position, operation
[AUT ]+[ FF]
Run Auto Pan：[AUT ]+[ENTER]
(2) Auto Pan operation takes the following para eters. You ust set these para eters before using a
Auto Pan co and to begin the scan operation. You can use the scan Stop co and or PT scan stop
co and to stop the scan. Setting scan condition:
Auto Pan Position(First specify position, second specify position)
Auto Pan Speed and Direction.
10. Stop Auto Pan：[AUT ]+[ FF] (only for NEON 、SAMSUNG protocol)or push the joystick to stop scan.
11. Control the Zoo of the Ca era：[WIDE]/[TELE]
12. Control the Focus of the Ca era：[FAR]/[NEAR]
13. Control the Iris of the Ca era：[ PEN]/[CL SE]
14. Auxiliary Control of the Ca era： By co bination of [F1] and [ N], [ FF] buttons, you can set so e
data of the ca era, and functions are listed as follows：
No. of
Value N
Control Object Definition of Keyboard Operation
[F1]+N+[ N] [F1]+N+[ FF]
0 Ca era Power Supply/Reset Control Power ON/OFF
Switching
Ca era Reset
1 Back Light Co pensation ON OFF
2 Zero Illu ination ON OFF
3 Display ON OFF
4 Digital Zoo ON OFF
5 Back Light of Keyboard Screen ON OFF
6 Focus Auto atic Manual
7 Iris Auto atic Manual
8
9
10
White Balance Mode（WB）Auto atic Manual
Indoor Mode Outdoor Mode
ATW Mode One Push WB
11 Black & White/Color Switching Color Black & White
12
13
14
Set Auto Pan (Only conditions for scan. If
start scan, operate as Ite 9 in this
paragraph)
< 180°, low speed > 180°, low speed
< 180°, iddle speed > 180°, iddle speed
< 180°, high speed > 180°, high speed
