( ) Denotes Dimensions in MM
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2005 Genlyte Group LLC • D0705
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Description
Individually addressable module that mounts anywhere along the track and
accepts any Lytespan Line & Low Voltage Incandescent luminaire (see luminaire
compatibility for exceptions) for the purpose of addressing a selected single
luminaire for raising and lowering the light level (dimming) or switching On/Off,
while powered by the same track. Programmable to store desired light levels of
single luminaires or to group with two or more luminaires within the same
system for the purpose of creating light scenes and effects (including kinetic
lighting effects)
Features
1. Module Housing: High-temperature impact resistant thermoplastic.
2. PCB: High temperature resistant programmable electronics with smart mod-
ule microprocessor.
3. Basic Lytespan Track Strip: Die cast aluminum, with high-temperature
impact resistant thermoplastic insulator, supporting electrical contacts.
Accepts Lytespan luminaires for individual control.
4. Track Attachment Fitting: High-temperature impact resistant poly-carbon-
ate, rotates into track; integral polarity keyguard.
5. Moveable Brass Contact: Extends for 2nd circuit in two circuit Lytespan
track systems.
6. Attachment Lever: Impact resistant polycarbonate. For mechanical/electri-
cal connection to track.
7. Locking Lever: Steel, safety locking lever locks and supports module in
track.
8. IR & Laser Sensors: Sensor devices for receiving information from ATOM
Remote Control.
9. Sensor Cover: Clear Polycarbonate, protects sensors from damage.
10. LED: Red indicator light, provides visual response to operation modes.
11. Top Cover Heat Sink: Die cast aluminum, for structural support and heat
dissipation.
Electrical
Unit is polarized and continuously grounded throughout. 250W load capacity.
Options & Accessories
ATOM Track Master Module (CAMTM): Used on track to cycle Module
scenes & to send out signals to multiple modules from a single location on
the track.
ATOM Wall Remote Control (CAMWRC): Used to activate programmed
scenes from wall location.
Lightolier Controls COMPOSETM PLC In-Line Filter (CPLCILF20):
Recommended for each track circuit with an ATOM installation. Reduces
unwanted electrical noise on track circuit.
Lightolier Controls COMPOSE Firewall, 4 & 8 circuit (CPLCFW4,
CPLCFW8): Used when multiple circuits are to be controlled.
Lightolier Controls COMPOSE Master Control Station (CP5ESPLC):
Ellipse Series 5, Scene Master
The ATOM System is compatible with all Lightolier Controls COMPOSE
PLC system.
Lytespan®Track Lighting System CAM25OVA
Page 1 of 2
Ordering Information
Catalog No. Finishes Track Mounting Luminaire Compatibility
CAM250VAWH Matte White Compatible with Lytespan Basic Should be "Compatible with
CAM250VABK Matte Black Radius, & Advent Track Systems. any Lytespan Line & Low Voltage
DO NOT USE with Extension Wands, Incandescent luminaire,
Sloped Ceiling Adapter, All Monopoints, 250W Max. DO NOT USE with Power Jack,
& Prospec Track Metal Halide, Fluorescent, or Convenience Outlet Units
Addressable Track Dimming Module
