Atmor INLINE 900 Manuel utilisateur

Hot Water on Demand

Step 4

Connect the Cold water hose to

the inlet on the left side of the unit.

(Don't forget to insert rubbers).

Be sure to use reinforced hose.

Be sure to close it properly.

Step 1

Find the optimal place.

Drill 4 holes and insert Plugs.

Step 2

Open the entrance cable in the

back of the unit.

Be sure to open the side of the

cable

Step 3

Hang the unit on the wall by 4

screws.

Don't forget to inset the electric

cable before.

Step 5

Connect the Hot water hose to the

outlet (Don’t forget the rubbers).

Be sure to use reinforced hose.

Be sure to close it well.

Open the water supply and check for

leakage around the hoses.

If there is no leakage - Go to step 6

leakage

Check again.

Don’t continue unless you sure

there is no leakage.

Step 6

Connect the electric cable to the

Terminal block.

Step 7

Close the cover by 4 short

screws

After closing the screws

Insert the Gray Bottom cover

OUTLET

INLET

Atmor Super 900 - Assembly Steps

FREEPHONE 0800 101 201 / sales@atmor.co.nz / www.atmor.co.nz

External PRD installed

at water inlet

Hot Water on Demand

Step 1

Fit isolating tap on

cold water supply

Step 2

Having already entered the

power cable, connect to the

terminal block.

Step 7

Blue Wave 402 - Assembly Steps

FREEPHONE 0800 101 201 / sales@atmor.co.nz / www.atmor.co.nz

Position heater at

eye level or higher.

Fix to the wall 2 top

and 1 bottom screw

Step 6

Step 4

Assemble and fit the sliding

shower bar to the wall including

the shower hose and rose

Step 3

Turn on the water to fill

the heating chamber and

check for leaks

Connect cold water supply

inlet hose

Step 5

Attach the front cover, round

the knobs to match the correct

pivot and secure by screw

top and bottom.

For further information on installation and operation

please refer to leaflet enclosed with the heater.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Atmor Chauffe-eau

Atmor

Atmor InLine-3.0 Manuel utilisateur

Atmor

Atmor Europe InLine 800 Series Mode d'emploi

Atmor

Atmor 100 Series Mode d'emploi

Atmor

Atmor New Manuel utilisateur

Atmor

Atmor AT900-04 Mode d'emploi

Atmor

Atmor Platinum Manuel utilisateur

Atmor

Atmor InLine 800 Series Mode d'emploi

Atmor

Atmor ThermoPro Series Manuel utilisateur

Atmor

Atmor HOTAP Mode d'emploi

Atmor

Atmor AT900-04 Manuel utilisateur

Atmor

Atmor Thermo Pro2 Series Manuel utilisateur

Atmor

Atmor Blue Wave Manuel utilisateur

Atmor

Atmor Enjoy Mode d'emploi

Atmor

Atmor Super 900 Manuel utilisateur

Manuels Chauffe-eau populaires d'autres marques

Kenmore

Kenmore 153.582400 Manuel utilisateur

Applimo

Applimo Edel AIR Manuel utilisateur

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Manuel utilisateur

clage

clage E-Mini Series Manuel utilisateur

Toyotomi

Toyotomi Oil Miser OM-180 Manuel utilisateur

Bradford White

Bradford White EF Series Manuel utilisateur

Eccotemp

Eccotemp 40-H Manuel utilisateur

Dimplex

Dimplex ECSd125-580 Mode d’emploi

Dux

Dux 32FCR6N Manuel utilisateur

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Guide de dépannage

Noritz

Noritz N-132M Manuel d'instructions

TESY

TESY GCV7/4S 10047 Fiche technique

A.O. Smith

A.O. Smith Gphe 50 Manuel utilisateur

Koryo

Koryo KWHZF15Y Manuel utilisateur

Pentair

Pentair PSC-14-4-02 Manuel utilisateur

GE 40M06AAG Instructions de montage

Thermor

Thermor AEROMAX SPLIT 2 Manuel utilisateur

American Hometec

American Hometec AHQ-B03X Manuel utilisateur