Atlas Equipment BP12000X Manuel utilisateur

Revised: 7/23/2019

Read this entire manual before operation begins.

Record below the following information which is located on the serial number

data plate.

Serial No.

Model No.

Date of Installation

Contents

General Information. . . . . . . . . . 5

Product Identiﬁcation . . . . . . . . . 8

Packing / Transport / Storage . . . . . 9

Lift Description . . . . . . . . . . . .11

Technical Speciﬁcation. . . . . . . . .12

Safety . . . . . . . . . . . . . . . .17

Installation . . . . . . . . . . . . . .20

Operation And Use . . . . . . . . . .29

Maintenance . . . . . . . . . . . . .31

Troubleshooting. . . . . . . . . . . .33

Parts Lists . . . . . . . . . . . . . .34

Warranty . . . . . . . . . . . . . . .45

BP12000X

Printing Characters And Symbols

Throughout this manual, the following symbols and

printing characters are used to facilitate reading:

Indicates the operations which

need proper care

Indicates prohibited

Indicates a possibility of danger

to the operators

BOLD

TYPE Important information

WARNING: before operating the lift and

carrying out any adjustments, read carefully

chapter 7 “Installation” where all operations

for a properly functioning lift are shown.

General Information 5

BP12000X

General Information

This chapter contains warning instructions to operate the lift properly and

prevent injury to operators or objects. This manual has been written to be used

by shop technicians in charge of the lift (operator) and routine maintenance

technician (maintenance operator). The operating instructions are considered to

be an integral part of the machine and must remain with it for its whole useful

life. Read every section of this manual carefully before operating the lift and

unpacking. It provides helpful information about:

• Safety Of People

• Safety Of The Lift

• Safety Of Lifted Vehicles

The company is not liable for possible problems, damage, accidents, installation,

etc. resulting from failure to follow the instructions contained in this manual.

Only skilled technicians of AUTHORIZED DEALERS or SERVICE CENTERS

AUTHORIZED by the manufacturer shall be allowed to carry out lifting, transport,

assembling, installation, adjustment, calibration, settings, extraordinary

maintenance, repairs, overhauling and dismantling of the lift.

The manufacturer is not responsible for possible damage to people,

vehicles or objects if said operations are carried out by unauthorized

personnel or the lift is improperly used.

Any use of the lift by operators who are not familiar with the instructions and

procedures contained herein is unauthorized.

1.1 Manual Keeping

For a proper use of this manual, the following is recommended:

• Keep the manual near the lift, in an easily accessible place.

• Keep the manual in an area protected from the damp.

• Use this manual properly without damaging it.

• Any use of the machine made by operators who are not familiar with the

instructions and procedures contained herein shall be forbidden.

This manual is an integral part of the lift: it shall be given to the new owner if

and when the lift is resold.

General Information 6

BP12000X

1.2 Obligation In Case Of Malfunction

In case of machine malfunction, follow the instructions

contained in the following chapters.

1.3 Cautions For The Safety Of The Operator

Operators must not be under the inﬂuence of sedatives, drugs or alcohol when

operating the machine.

Before operating the lift, operators must be familiar with

the position and function of all controls, as well as with the

machine features shown in the chapter “Operation and use”

1.4 Warnings

Unauthorized changes and/or modiﬁcations to the machine

relieve the manufacturer of any liability for possible damages to

objects or people. Do not remove or make inoperative the safety

devices, this would cause a violation of safety at work laws and

regulations.

Any other use which differs from that provided for by the

manufacturer of the machine is strictly forbidden.

The use of non genuine parts may cause damage to people or

objects

1.5 Scrapping

When your machine’s working life is over and it can no longer be used, it must

be made inoperative by removing any connection to power sources. These

units are considered as special waste material, and should be broken down into

uniform parts and disposed of in compliance with current laws and regulations. If

the packing are not polluting or non-biodegradable, deliver them to appropriate

handling station.

General Information 7

BP12000X

Declaration Of Warranty And Limitation Of Liability

The manufacturer has paid proper attention to the preparation of this manual.

However, nothing contained herein modiﬁes or alters, in any way, the terms

and conditions of manufacturer agreement by which this lift was acquired, nor

increase, in any way, manufacturer’s liability to the customer.

To The Reader

Every effort has been made to ensure that the information contained in this

manual is correct, complete, and up-to date. The manufacturer is not liable for

any mistakes made when drawing up this manual and reserves the right to make

any changes due the development of the product, at any time.

Product Identification 8

BP12000X

Product Identiﬁcation

The identiﬁcation data of the machine are shown in the serial plate placed on the

power side column.

Use the identiﬁcation tag on the lift column to order spare

parts and when getting in touch with the manufacturer

(inquiry). The removal of this label is strictly forbidden.

Machines may be updated or slightly modiﬁed from an aesthetic point of view

and, as a consequence, they may present different features from these shown,

this without prejudicing what has been described herein.

2.1 Warranty Certiﬁcate

The warranty is valid for a period of 12 months starting from the date of

the purchase invoice. The warranty will come immediately to an end when

unauthorized modiﬁcations to the machine or parts of it are carried out. The

presence of defects in workmanship must be veriﬁed by the Manufacturer’s

personnel in charge.

2.2 Technical Servicing

For all servicing and maintenance operations not speciﬁed or shown in these

instructions, contact your Dealer where the machine has been bought or the

Manufacturer’s Commercial Department.

Packing / Transport / Storage 9

BP12000X

Packing / Transport / Storage

Only skilled personnel who are familiar with the lift and this manual shall

be allowed to carry out packing, lifting, handling, transport and unpacking

operations.

3.1 Packing

The packing of the lift is delivered in following components:

• 1 base unit packed in a steel frame, wrapped up in non-scratch material,

including all the accessories.

• 1 power unit packed in a carton box.

Figure 1 - Packages

3.2 Lifting And Handling

When loading/unloading or transporting the equipment to the site, be sure to

use suitable loading (e.g. cranes, trucks) and hoisting means. Be sure also to

hoist and transport the components securely so that they cannot drop, taking

into consideration the package’s size, weight and center of gravity and it’s fragile

parts.

Packing / Transport / Storage 10

BP12000X

3.3 Storage And Stacking Of Packages

Packages must be stored in a covered place, out of direct sunlight and in low

humidity, at a temperature between -10°C and +40°C.

3.4 Delivery And Check Of Packages

When the lift is delivered, check for possible damages due to transport and

storage; verify that what is speciﬁed in the manufacturer’s conﬁrmation of order

is included. In case of damage in transit, the customer must immediately inform

the carrier of the problem.

Packages must be opened paying attention not to cause damage to people (keep

a safe distance when opening straps) and parts of the lift (be careful the objects

do not drop from the package when opening).

Autres manuels pour BP12000X

Table des matières

Autres manuels Atlas Equipment Système de levage

Atlas Equipment

Atlas Equipment BP8000 Manuel utilisateur

Atlas Equipment

Atlas Equipment 409-HP Manuel utilisateur

Atlas Equipment

Atlas Equipment BP12000X Manuel utilisateur

Atlas Equipment

Atlas Equipment 18K Manuel utilisateur

Atlas Equipment

Atlas Equipment Atlas PV-10PX Manuel utilisateur

Atlas Equipment

Atlas Equipment Atlas BP9000X Manuel utilisateur

Atlas Equipment

Atlas Equipment Garage Pro 8000 EXT Manuel utilisateur

Atlas Equipment

Atlas Equipment 408-SL Super Deluxe Manuel utilisateur

Atlas Equipment

Atlas Equipment OH-10X Manuel utilisateur

Atlas Equipment

Atlas Equipment PV-15PX Manuel utilisateur

Atlas Equipment

Atlas Equipment 414A Manuel utilisateur

Atlas Equipment

Atlas Equipment LR10 Manuel utilisateur

Atlas Equipment

Atlas Equipment OH-10X Manuel utilisateur

Atlas Equipment

Atlas Equipment BP12000X Instructions d'installation

Atlas Equipment

Atlas Equipment ATEXH-PV-12PX Manuel utilisateur

Atlas Equipment

Atlas Equipment 90HSC Manuel utilisateur

Manuels Système de levage populaires d'autres marques

morse

morse 82H-124 Manuel utilisateur

Braun

Braun NL955 Series Manuel utilisateur

haacon

haacon 1889.10 Manuel utilisateur

Protekt

Protekt AT 252 Manuel utilisateur

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuel utilisateur

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuel utilisateur

Genie

Genie Z-60/34 Manuel utilisateur

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuel utilisateur

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuel de programmation

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuel de programmation

BERG

BERG BeNomic EasyLeaf Manuel utilisateur

Powermate

Powermate LiftGate LG-3 Manuel utilisateur

Snorkel

Snorkel TM12 Series Manuel utilisateur

Terberg

Terberg OMNIDEKA Manuel utilisateur

Harmar Mobility

Harmar Mobility AL625 Mode d'emploi

Rotary

Rotary SPO16 Manuel utilisateur