Atecpool ATECF11 Manuel utilisateur

CONTENTS

1. IMPORTANT SAFETY INSTRUCTIONS...................................................... 1

2. TECHNICAL SPECIFICATIONS .................................................................. 1

3. OVERALL DIMENSION ............................................................................... 2

4. INSTALLATION ............................................................................................ 2

5. SETTING & OPERATION ............................................................................ 3

REPLACEMENT PARTS ............................................................................. 6

7. WIRING Co ectio .................................................................................... 7

8. EXTERNAL CONTROL (Not i cluded i sta dard model) ........................... 8

9. TROUBLE SHOOTING ................................................................................ 9

10.ERROR CODE .......................................................................................... 10

11. MAINTENANCE ....................................................................................... 10

12. WARRANTY & EXCLUSIONS ................................................................. 11

13. WEEE LEGISLATION .............................................................................. 11

IMPORTANT SAFE

This guide provides i stallatio a d operatio i structio s for this pump. Co sult

with a y questio s regardi g this equipme t.

1.1

When installing and using this electrical equip ent, basic safety precau

should always be followed

•RISK OF ELECTRICAL SHOCK. Co ect o ly to a bra ch circuit protected by a

grou d-fault circuit-

i terru

that the circuit is protected by a GFCI.

•This pump is for use with perma e t i stalled i grou d or above grou d swimmi g pools

a d may also be used with hot tubs a d spas if so marked. Do

grou d pools that ca be readily disassembled for storage.

• The pump is ot submersible.

• Before servici g the pump; switch off power to the pump by disco ecti g the mai

circuit to the pump.

• Never ope the i side of the drive motor

1.2 All installations ust be fitted with earth leakage or residual current protection

devices, having a rated residual operating current not exceeding 30 A.

WARNING

•

Do ot ru the pump dry. I case of dry ru , mecha ical seal

leaki g. Fill the

pump with water before starti g.

•

Before servici g the pump, switch OFF power to the pump by disco ecti g the mai circuit to the

pump a d release all pressure from pump a d pipi g system.

•

Never tighte or loose screws while the pump is operati g.

•

Do ot block the pump suctio .

2. TECHNICAL SPECIFICATIONS

Model

I put Power

Output Power

Curre t

Qmax

Hmax

Supply

V/Ph/Hz

Co ectio s

Motor Speed

Net Weight/Gross Weight

IMPORTANT SAFE

TY INSTRUCTIONS

This guide provides i stallatio a d operatio i structio s for this pump. Co sult

with a y questio s regardi g this equipme t.

When installing and using this electrical equip ent, basic safety precau

should always be followed

•RISK OF ELECTRICAL SHOCK. Co ect o ly to a bra ch circuit protected by a

i terru

pter (GFCI). Co tact a qualified electricia if you ca ot verify

that the circuit is protected by a GFCI.

•This pump is for use with perma e t i stalled i grou d or above grou d swimmi g pools

a d may also be used with hot tubs a d spas if so marked. Do

ot use with above

grou d pools that ca be readily disassembled for storage.

• The pump is ot submersible.

• Before servici g the pump; switch off power to the pump by disco ecti g the mai

• Never ope the i side of the drive motor

e closure.

1.2 All installations ust be fitted with earth leakage or residual current protection

devices, having a rated residual operating current not exceeding 30 A.

Do ot ru the pump dry. I case of dry ru , mecha ical seal

will be damaged a d the pump

pump with water before starti g.

Before servici g the pump, switch OFF power to the pump by disco ecti g the mai circuit to the

pump a d release all pressure from pump a d pipi g system.

Never tighte or loose screws while the pump is operati g.

Do ot block the pump suctio .

2. TECHNICAL SPECIFICATIONS

ATECF11 ATECF15

kW HP kW HP

P1 1.1 1.5 1.5 2

P2 0.75 1 1.1 1.5

A 3.1 4.5

m³/h 24 30

m 15 19.5

V/Ph/Hz

220-240/1/50

mm 63

RPM 1200-2900

Kg 16.2/17.2 16.7/19.5

This guide provides i stallatio a d operatio i structio s for this pump. Co sult

your supplier

When installing and using this electrical equip ent, basic safety precau

tions

•RISK OF ELECTRICAL SHOCK. Co ect o ly to a bra ch circuit protected by a

pter (GFCI). Co tact a qualified electricia if you ca ot verify

•This pump is for use with perma e t i stalled i grou d or above grou d swimmi g pools

ot use with above

• Before servici g the pump; switch off power to the pump by disco ecti g the mai

1.2 All installations ust be fitted with earth leakage or residual current protection

will be damaged a d the pump

will start

Before servici g the pump, switch OFF power to the pump by disco ecti g the mai circuit to the

ATECF22

kW HP

2.2 3

1.7 2.3

6.6

19.6/22.1

3. OVERALL DIMENSION

Model A

ATECF11 325

ATECF15 325

ATECF22 325

4. INSTALLATION

4.1. Pu p Location

1).

Locate pump as close to pool as practical a d ru suctio li es as direct as possible to

reduce frictio loss.

2).

To avoid direct su shi e or heat, It is recomme ded to place pump i door or i the shade.

3).

Do NOT i stall pump i a damp or o

require free circulatio of air for cooli g.

4.2. Piping

1). For improved pool plumbi g, it is recomme ded to use a larger pipe size. Whe i stalli g

the i let a d outlet fitti gs (male adaptors), use thread seala t.

2). Pipi g o the suctio side of the pump should be the same or larger tha the retur li

diameter.

3). Plumbi g o the suctio side of the pump should be as short as possible.

4). For most i stallatio s we recomme ds i stalli g a valve o both the pump suctio a d

retur li es so that the pump ca be isolated duri g routi e mai te a ce. How

also recomme d that a valve, elbow or tee i stalled i the suctio li e should be o closer

to the fro t of the pump tha five times the suctio li e diameter.

3. OVERALL DIMENSION

B C D E F G

603 328 222 272 332 268

Locate pump as close to pool as practical a d ru suctio li es as direct as possible to

To avoid direct su shi e or heat, It is recomme ded to place pump i door or i the shade.

Do NOT i stall pump i a damp or o

ve tilated locatio . Keep motor clea . Pump motors