OPERATION
Vehicle Preparation
1. 3ODFH vehicle on a hard, level surface, such as reinforced concrete, large enough to accommodate vehicle, MDFNV
MDFNVWDQGVDQGZKHHOGROO\.
2. 6HWWKHHPHUJHQF\EUDNHXQOHVVWKHUHDUGUXPWLUHDQGZKHHODUHDOOWREHUHPRYHdDVDQDVVHPEO\.
&KRFN all unlifted tires in ERWK directionsAND WDNH HYHU\ precaution QHFHVVDU\ to ensure the set up is VWDEOH and
will prevent all inadvertent vehicle movement.
Raising The Lifting Arms
1. thread engagement.
WARNING: Followthevehiclemanufacturersrecommendedremovalandinstallationprocedures for tire, wheel,
hub, or axle assemblies as needed! DO NOT remove more than is recommended by the vehicle manufacturer!
2. After the tire, wheel DVVHPEO\ has EHHQ loosened from the KXE or axle and is UHDG\ to EH removed, position the
GROO\ under the DVVHPEO\ to EH removed. 3XPS until load reaches desired height. $GMXVW lift arm tilt such that the
WLUHZKHHODVVHPEO\ZLOOQHVWVHFXUHO\EHWZHHQWKHOLIWDUPVZLWKRXWIDOOLQJIRUZDUGWRZaUGWKHIURQWZKHHOV
Loading the Wheel Dolly
WARNING: NEVER load this device with more than the weight of the wheel assembly to be removed! ENSURE
that the vehicle is securely positioned and supported by mechanical means such as a pair of appropriately
rated jack stands or cribbing and blocking.
WARNING: NEVER use a wheel dolly as a wheel pulling device. Before transporting wheel assembly.
Ensure that it is IUHHIURPWKHKXERUGUXPDVVHPEO\DQGWKDWLWLVVHFXUHGWRWKHZKHHO GROO\XVLQJWKH
provided restraint device.
:KHQ the weight of the loosened tire, wheel DVVHPEO\ is supported E\ the wheel doll\, &DUHIXOO\ roll the wheel
GROO\ DZD\ from the drum or axle. :KHQ the DVVHPEO\ is clear, LPPHGLDWHO\ secure the WLUHZKHHO DVVHPEO\ with
the provided chains.
Lowering
(QJDJHDQGVORZO\WXUQWKHUHOHDVHYDOYHFRXQWHUFORFNZLVHEXWQHYHUPRUHWKDQIXOOturn.
Transporting Loaded Wheel Dolly
1. (QVXUHWKDWZKHHODVVHPEO\LVVHFXUHGWRWKHZKHHOGROO\E\PHDQVRIWKHSURYLGHG chains.
2. :KHQ wheel DVVHPEO\ has cleared the KXE or the axle, lower the lift arms to the lowest position that will still allow
ZKHHOGROO\ZKHHODQGFDVWHUPRYHPHQW
3XVKRUSXOOWRGHVLUHGORFDWLRQ
WARNING: Follow the vehicle manufacturers recommended removal and installation procedures for tire,
wheel, hub, or axle assemblies as needed!
WARNING: If the operating handle is worn, operates abnormally, or will not positively engage the release
valve, immediately discontinue use of the jack until a replacement handle assembly can be acquired.
To avoid crushing and related injuries and or property damage:
Read, understand and follow all printed materials provided with and on this wheel
GROO\
Do not exceed rated capacit\.
Before positioning wheel doll\,ensureWKDWWKHYHKLFOHLVVHFXUHO\SRVLWLRQHGDQG
VXSSRUWHGE\PHFKDQLFDOPHDQVVXFKDVDSDLURIDSSURSULDWHO\UDWHGMDFNVWDQGVRU
FULEELQJDQGEORFNLQJ
8VHRQO\RQVPRRWKKDUGDQGOHYHOVXUIDcHVFDSDEOHRIVXVWDLQLQJWKHORDG
ChockHDFKXQOLIWHGZKHHODVVHPEO\LQEoth directions.
Be alert and sober when using this product! NeverRSHUDWHWKLVHTXLSPHQWZKHQ
%HIRUHPRYLQJORZHUWKHORDGWRWKHORZeVWSRVVLEOHSRLQWDQGDVVXUHWKDWWKHORDGLs
centered and secured with a load restraint device.
2QO\DWWDFKPHQWVDQGRUDGDSWHUVVXSSOLeGE\WKHPDQXIDFWXUHUVKDOOEHXVHG
1RDOWHUDWLRQVVKDOOEHPDGHWRWKLVSURGuct.
1HYHUXVHK\GUDXOLFXQLWMDFNDVDVWDQd alone device.
$SSO\ORDGDVFORVHWRWKHYHUWLFDOSRVLWLRnRIWKHOLIWLQJPHPEHUDVSRVVLEOH
!
!
!
!
!
WARNING
