AT&T CL82209 Manuel utilisateur

Quick start guide

CL82109/CL82209/CL82309/

CL82359/CL82409/CL82509/

CL82609/CL82659/CL82859

DECT 6.0 corded/cordless

telephone/answering system

with caller ID/call waiting

Installation

Install the telephone base close to a telephone jack and a power outlet not

controlled by a wall switch. The telephone base can be placed on a flat

surface or vertically mounted on the wall. For optimum range and better

reception, place the telephone base in a central and open location.

If you subscribe to high-speed Internet service (digital subscriber line - DSL)

through your telephone line, you must install a DSL filter between the

telephone line cord and the telephone wall jack (see the following page). The

filter prevents noise and caller ID problems caused by DSL interference.

Please contact your DSL service provider for more information about DSL

filters.

Your product may be shipped with a protective sticker covering the handset or

telephone base display - remove it before use.

For customer service or product information, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial

1 (866) 288-4268.

Avoid placing the telephone base too close to:

• Communication devices such as: television sets, VCRs, or other cordless

telephones.

• Excessive heat sources.

• Noise sources such as a window with traffic outside, motors, microwave

ovens, refrigerators, or fluorescent lighting.

• Excessive dust sources such as a workshop or garage.

• Excessive moisture.

• Extremely low temperature.

• Mechanical vibration or shock such as on top of the washing machine or

workbench.

You must install and charge the

handset battery before using the

cordless handset.

See page 3-4 for easy instructions.

STOP!

Telephone base & charger installation

Install the telephone as shown below.

The telephone base is ready for tabletop use. If you want to change to wall

mounting, see user’s manual for details.

IMPORTANT INFORMATION

1. Use only the power adapter(s) supplied with this product. To order a replacement power

adapter, visit our website at www.telephones.att.com, or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

2. The power adapters are intended to be correctly oriented in a vertical or floor mount position.

The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-

the-table or cabinet outlet.

1. Plug one end of

the telephone line

cord into the

telephone jack on

the bottom of the

telephone base.

2. Route the power adapter cord through the slot.

3. Plug the small

end of the

telephone base

power adapter

into the power

jack on the

bottom of the

telephone base.

4. Place the cords

into the

channels.

5. Plug the large end of

the power adapter

into a power outlet

not controlled by a

wall switch.

Power

adapter

If you have DSL high

speed Internet

service, a DSL filter

(not included) is

required.

Telephone line

cord

6. Plug the other end

of the telephone

line cord into a

telephone jack or a

DSL filter.

7. Raise the antenna.

Plug the power adapter

into an electrical outlet

not controlled by a wall

switch.

Charger

installation

Battery installation & charging

Install the battery as shown below. Once you have installed the battery, the

screen indicates the battery status (see table below). If necessary, place the

handset in the telephone base or charger to charge the battery. For best

performance, keep the handset in the charger when not in use. The battery is

fully charged after 16 hours of continuous charging. See the table on the

Technical specifications page of the user’s manual for battery

operating times.

If the screen is blank, you need to charge the handset without interruption

for at least 10 minutes to give the handset enough charge to use the

telephone for a short time. The screen shows LOW BATTERY and the

backlight is off until you have charged the battery without interruption for at

least one hour. The following table summarizes the battery charge indicators

and actions take.

Battery indicators Battery status Action

The screen is blank. Battery has no charge and the

handset cannot be used.

Charge without interruption until

the screen shows LOW BATTERY

(at least 10 minutes).

The screen shows PLACE

IN CHARGER and

flashes.

Battery has very little charge

and the handset cannot be used.

Charge without interruption until

the screen shows LOW BATTERY

(at least four minutes).

The screen shows LOW

BATTERY and flashes.

Battery has enough charge to

be used for a short time.

Charge until the screen shows

HANDSET X (about one hour).

The screen shows

HANDSET X.

Battery is charged. To keep the battery charged,

place it in the telephone base or

charger when not in use.

NOTE: If you are on a phone call in low battery mode, you hear four short beeps

every minute.

Step 1

Plug the battery securely into the

connector inside the handset battery

compartment, matching the color-coded

label. Insert the supplied battery with the

label THIS SIDE UP facing up as indicated.

Step 2

Align the cover flat against the

battery compartment, then slide

it upwards until it clicks into

place.

Battery installation and charging

IMPORTANT INFORMATION

1. Use only the supplied rechargeable battery or replacement battery (model

BT8001). To order, visit our website at www.telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

2. If you do not use the handset for a long time, disconnect and remove the battery

to prevent possible leakage.

Step 3

Charge the handset by placing it face up in the

telephone base or charger. The CHARGE light on the top

of the handset is on during charging.

Quick reference guide - handset

CHARGE indicator

On when the handset is

charging in the telephone

base or charger.

TCID/-VOLUME

Press TCID to display caller ID

history.

Press to scroll down while in

menus.

While entering names or

numbers, press to move the

cursor to the left.

Press to decrease the listening

volume when on a call.

PHONE/FLASH

Press to make or answer a

call.

During a call, press to answer

an incoming call when you

receive a call waiting alert.

MUTE/DELETE

During a call, press to mute

the microphone.

While reviewing the caller ID

history, the directory or the

redial memory, press to delete

an individual entry.

While predialing, press to

delete digits.

SPEAKER

Press to switch between

speakerphone and handset.

MENU/SELECT

Press to show the menu.

While in the menu, press to

select an item or save an

entry or setting.

DIRS/+VOLUME

Press DIRSto show

directory entries.

Press to scroll up while in

menus.

While entering names or

numbers, press to move the

cursor to the right.

Press to increase the

listening volume when on a

call.

OFF/CLEAR

During a call, press to hang

up.

While in a menu, press to

cancel an operation, back up

to the previous menu, or exit

the menu display.

Press and hold while the

telephone is not in use to

erase the missed calls

indicator.

REDIAL/PAUSE

Press repeatedly to view the

last five numbers dialed.

While entering numbers,

press and hold to insert a

dialing pause.

INT

Press to begin an intercom

conversation or to transfer a

call.

While reviewing a call log

entry, press repeatedly to add

or remove 1 in front of the

telephone number before

dialing or saving it in the

directory.

Press repeatedly to display

other dialing options when

reviewing a call log entry.

Quick reference guide - handset

Main menu

> shows a highlighted item

Main menu

ANS. SYSTEM

DIRECTORY

CALL LOG

RINGER VOLUME

RINGER TONE

KEY TONE

LCD LANGUAGE

SET DATE/TIME

CLR VOICEMAIL

HOME AREA CODE

Using menus

Press MENU/SELECT to show the first

menu item, ANS. SYSTEM.

Press TCID or DIRSto scroll through

menu items.

Press MENU/SELECT to select or save

changes to a highlighted menu item.

Press OFF/CLEAR to cancel an

operation, back up to the previous

menu, or exit the menu display.

?!BOT/TZTUFN

EJSFDUPSZ

?!BOT/TZTUFN

EJSFDUPSZ

Quick reference guide - telephone base

HANDSET LOCATOR

Press to make handsets beep

so you can locate them.

PLAY/STOP

Press to start or stop

message playback.

REPEAT

Press to repeat a

message.

Press twice to play the

previous message.

SKIP

Press to skip a

message.

VOLUME ST

During message playback,

press to adjust the

listening volume.

While in idle mode, press

to adjust the base ringer

volume.

ANSWER ON/OFF

Press to turn the

answering system on or

off.

XDELETE

Press to delete the

message currently playing.

Press twice to delete all

old messages when the

phone is not in use.

MESSAGE COUNTER

Number of messages (or

during playback, message

number currently playing).

VOICEMAIL indicator

Flashes when you have new

voicemail. Voicemail service

is offered by your local

telephone company, and is

different from answering

system messages.

IN USE indicator

On when the handset is in

use, when the answering

system is answering an

incoming call or when you

are registering a handset.

Flashes when another

telephone is in use on the

same line, or when you are

deregistering handset(s) from

the telephone base.

Flashes quickly when there is

an incoming call.

www.telephones.att.com

AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to

Advanced American Telephones, San Antonio, TX 78219.

Printed in China. Issue 4 AT&T 09/09.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels AT&T Téléphone IP

AT&T

AT&T ML17939 Manuel utilisateur

AT&T

AT&T EL52200 Manuel utilisateur

AT&T

AT&T Definity 8434 Manuel utilisateur

AT&T

AT&T 8410 Manuel utilisateur

AT&T

AT&T Syn248 SB35020 Manuel utilisateur

AT&T

AT&T Definity 8434 Manuel utilisateur

AT&T

AT&T TL90076 Manuel utilisateur

AT&T

AT&T EL52219 Manuel utilisateur

AT&T

AT&T 7406BIS Manuel utilisateur

AT&T

AT&T DEFINITY 8503T Manuel utilisateur

AT&T

AT&T Synapse SB67020 Manuel utilisateur

AT&T

AT&T TL32100 Manuel utilisateur

AT&T

AT&T MS2025 Manuel utilisateur

AT&T

AT&T SB8735 Manuel utilisateur

AT&T

AT&T TL 7610 Manuel utilisateur

AT&T

AT&T Synapse SB67020 Manuel utilisateur

AT&T

AT&T Definity 7444 Manuel utilisateur

AT&T

AT&T Polycom VVX 300 Series Manuel utilisateur

AT&T

AT&T CL83113 Manuel utilisateur

AT&T

AT&T Definity 8434 Manuel utilisateur

AT&T

AT&T Syn248 SB35020 Manuel utilisateur

AT&T

AT&T Syn248 SB35031 Manuel utilisateur

AT&T

AT&T SynJ SB67118 Manuel utilisateur

AT&T

AT&T SB67030 Manuel utilisateur

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Polycom

Polycom Polycom VVX 600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Cisco

Cisco SPA-500 Series Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur