AT&T 4981 Manuel utilisateur
What Do The All-Fi Booster Lights Mean?
All-Fi Booster (4981)
What Do The Lights Mean?
Complete guide to the information the LED
lights on your AT&T All-FiTM Booster provide.
© 2023 AT&T Intellectual Property. AT&T and globe logo are registered trademarks and service marks of AT&T Intellectual Property and/or AT&T affiliated companies.
Display & Notification Light
Notification Light Color Meaning
Off No power or All-Fi Booster has been rebooted. Make sure the All-Fi Booster is plugged in to a working wall
outlet and the back power LED is green.
Solid White Your All-Fi Booster is connected. Enjoy AT&T internet Service!
Pulse White
(fast) Your All-Fi Booster is starting up or connecting to the hub’s Wi-Fi, please wait during this time.
Pulse Green
(slow) Powered up and waiting to be paired.
Solid Red
The All-Fi Booster failed to pair. It may be connected through a 3rd party router. Please reset by pressing the
red reset button on the back of the booster, then connect an Ethernet cable between the All-Fi Booster and the
All-Fi Hub to pair. This could also mean Extended Wi-Fi Service is NOT active. If the Solid RED light persists,
contact ATT.com/support.
© 2023 AT&T Intellectual Property. AT&T and globe logo are registered trademarks and service marks of AT&T Intellectual Property and/or AT&T affiliated companies.
Display & Notification Light (page 2)
Display & Notification Light
Notification Light Color Meaning
Pulse Red
(slow)
Your All-Fi Booster is having connection issues. Please check for a loose, disconnected or damaged Ethernet
cable. Or It may be too far from the All-Fi Hub.
Pulse Amber
(fast)
Software updating. Please wait until the light turns back to solid white. Do not unplug the All-Fi Booster during
this process.
Pulsing Red/Green
(fast)
Your All-Fi Booster is configured and connected, but its placement may not be optimal for best performance.
It could be too far from the All-Fi Hub or another Booster. Try to move it to a closer location.
Pulse Red
(fast) Red button reset has been pressed for less than 10 seconds. Booster will reboot once button has been
released.
Pulse Green
(fast) Red button reset was held for more than 10 seconds. Factory reset will begin once button has been released.
© 2023 AT&T Intellectual Property. AT&T and globe logo are registered trademarks and service marks of AT&T Intellectual Property and/or AT&T affiliated companies.
Images of All-Fi Booster (front/rear)
Notification
Light
1G
Ethernet
Port LED
Power Jack
LED
2.5G
Ethernet
Port LED
WPS
Button LED
Reset
Button
© 2023 AT&T Intellectual Property. AT&T and globe logo are registered trademarks and service marks of AT&T Intellectual Property and/or AT&T affiliated companies.
WPS LED (back of hub)
Notification Light WPS light Color Meaning
White/ WPS Off Booster is working properly. Press the back WPS button to begin pairing and observe
Service LED on the front of the All-Fi Booster.
Pulse Green Take action on the Wi-Fi device you are trying to connect. You may also choose to add an
Ethernet cable from the booster’s back ethernet port to the hub’s ethernet port to
connect
Solid Green WPS Pairing is successful.
Pulse Red Your All-Fi Booster detected multiple Wi-Fi devices trying to connect via WPS. Please wait
before trying again.
Solid Red Attempt to connect your Wi-Fi devices using WPS has failed. Please press the WPS button
to try again.
© 2023 AT&T Intellectual Property. AT&T and globe logo are registered trademarks and service marks of AT&T Intellectual Property and/or AT&T affiliated companies.
Table des matières
Autres manuels AT&T Extenseur
AT&T
AT&T Smart Wi-Fi Extender Manuel utilisateur
AT&T
AT&T Smart Wi-Fi Extender Manuel utilisateur
AT&T
AT&T Smart Wi-Fi Extender Manuel utilisateur
AT&T
AT&T MicroCell Manuel utilisateur
AT&T
AT&T AirTies 4971 Manuel utilisateur
AT&T
AT&T Smart Wi-Fi Extender Manuel utilisateur
AT&T
AT&T 3G MicroCell Manuel utilisateur
AT&T
AT&T AirTies 4971 Instructions d'utilisation
AT&T
AT&T metrocell 9962 Manuel utilisateur
AT&T
AT&T MicroCell Manuel utilisateur
