Astronics Trig-Tek 850A Manuel utilisateur
Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra
Trig-Tek™
850A/B
Contact Chatter Detector
User Manual
Publication No. 980972 Rev. B
Astronics Test Systems Inc.
4 Goodyear, Irvine, CA 92618
Tel: (800) 722-2528, (949) 859-8999; Fax: (949) 859-7139
atsinfo@astronics.com atssales@astronics.com
atshelpdesk@astronics.com http://www.astronicstestsystems.com
Copyright 2011 by Astronics Test Systems Inc. Printed in the United States of America. All rights reserved.
This book or parts thereof may not be reproduced in any form without written permission of the publisher.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
THANK YOU FOR PURCHASING THIS
ASTRONICS TEST SYSTEMS PRODUCT
For this product, or any other Astronics Test Systems product that incorporates software drivers,
you may access our web site to verify and/or download the latest driver versions. The web
address for driver downloads is:
http://www.astronicstestsystems.com/support/downloads
If you have any questions about software driver downloads or our privacy policy, please contact
us at:
atsinfo@astronics.com
WARRANTY STATEMENT
All Astronics Test Systems products are designed to exacting standards and manufactured in full
compliance to our AS9100 Quality Management System processes.
This warranty does not apply to defects resulting from any modification(s) of any product or part
without Astronics Test Systems express written consent, or misuse of any product or part. The
warranty also does not apply to fuses, software, non-rechargeable batteries, damage from
battery leakage, or problems arising from normal wear, such as mechanical relay life, or failure to
follow instructions.
This warranty is in lieu of all other warranties, expressed or implied, including any implied
warranty of merchantability or fitness for a particular use. The remedies provided herein are
buyer’s sole and exclusive remedies.
For the specific terms of your standard warranty, contact Customer Support. Please have the
following information available to facilitate service.
1. Product serial number
2. Product model number
3. Your company and contact information
You may contact Customer Support by:
E-Mail: atshelpdesk@astronics.com
Telephone: +1 800 722 3262 (USA)
Fax: +1 949 859 7139 (USA)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
RETURN OF PRODUCT
Authorization is required from Astronics Test Systems before you send us your product or sub-assembly for
service or calibration. Call or contact Customer Support at 1-800-722-3262 or 1-949-859-8999 or via fax at
1-949-859-7139. We can also be reached at: atshelpdesk@astronics.com.
If the original packing material is unavailable, ship the product or sub-assembly in an ESD shielding bag and
use appropriate packing materials to surround and protect the product.
PROPRIETARY NOTICE
This document and the technical data herein disclosed, are proprietary to Astronics Test Systems, and shall
not, without express written permission of Astronics Test Systems, be used in whole or in part to solicit
quotations from a competitive source or used for manufacture by anyone other than Astronics Test
Systems. The information herein has been developed at private expense, and may only be used for
operation and maintenance reference purposes or for purposes of engineering evaluation and incorporation
into technical specifications and other documents which specify procurement of products from Astronics
Test Systems.
TRADEMARKS AND SERVICE MARKS
All trademarks and service marks used in this document are the property of their respective owners.
•Racal Instruments, Talon Instruments, Trig-Tek, ActivATE, Adapt-A-Switch, N-GEN, and PAWS are
trademarks of Astronics Test Systems in the United States.
DISCLAIMER
Buyer acknowledges and agrees that it is responsible for the operation of the goods purchased and should
ensure that they are used properly and in accordance with this document and any other instructions
provided by Seller. Astronics Test Systems products are not specifically designed, manufactured or
intended to be used as parts, assemblies or components in planning, construction, maintenance or
operation of a nuclear facility, or in life support or safety critical applications in which the failure of the
Astronics Test Systems product could create a situation where personal injury or death could occur. Should
Buyer purchase Astronics Test Systems product for such unintended application, Buyer shall indemnify and
hold Astronics Test Systems, its officers, employees, subsidiaries, affiliates and distributors harmless
against all claims arising out of a claim for personal injury or death associated with such unintended use.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
FOR YOUR SAFETY
Before undertaking any troubleshooting, maintenance or exploratory procedure, read carefully the
WARNINGS and CAUTION notices.
This equipment contains voltage hazardous to
human life and safety, and is capable of
inflicting personal injury.
If this instrument is to be powered from the AC line (mains) through an autotransformer,
ensure the common connector is connected to the neutral (earth pole) of the power
supply.
Before operating the unit, ensure the conductor (green wire) is connected to the ground
(earth) conductor of the power outlet. Do not use a two-conductor extension cord or a
three-prong/two-prong adapter. This will defeat the protective feature of the third
conductor in the power cord.
Maintenance and calibration procedures sometimes call for operation of the unit with
power applied and protective covers removed. Read the procedures and heed warnings
to avoid “live” circuit points.
Before operating this instrument:
1. Ensure the proper fuse is in place for the power source to operate.
2. Ensure all other devices connected to or in proximity to this instrument are properly grounded or
connected to the protective third-wire earth ground.
If the instrument:
- fails to operate satisfactorily
- shows visible damage
- has been stored under unfavorable conditions
- has sustained stress
Do not operate until performance is checked by qualified personnel.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Publication No. 980972 Rev. B 850A/B User Manual
Table of Contents
Chapter 1.........................................................................................................................1-1
Introduction.....................................................................................................................1-1
Specifications .................................................................................................................................1-2
Controls..........................................................................................................................................1-2
Indicators........................................................................................................................................1-3
Power .............................................................................................................................................1-3
Chapter 2.........................................................................................................................2-1
Operation.........................................................................................................................2-1
Current Setting ...............................................................................................................................2-1
Time Interval Switch Settings.........................................................................................................2-1
Contact Connections and Switches................................................................................................2-1
Fault................................................................................................................................................2-2
Chapter 3.........................................................................................................................3-1
Calibration.......................................................................................................................3-1
Timing Interval Adjustment.........................................................................................................3-1
Contact Current Adjustment.......................................................................................................3-2
Astronics Test Systems i
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
850A/B User Manual Publication No. 980972 Rev. B
This page intentionally left blank.
ii Astronics Test Systems
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Publication No. 980972 Rev. B 850A/B User Manual
List of Figures
Figure 1-1. Trig-Tek 850A Contact Chatter Detector........................................................................1-1
Figure 1-2. Trig-Tek 850B Contact Chatter Detector........................................................................1-1
Figure 2-1. Switch S1 – Input Voltage Setting...................................................................................2-2
Figure 3-1. Calibration Adjustments..................................................................................................3-1
Astronics Test Systems iii
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
850A/B User Manual Publication No. 980972 Rev. B
DOCUMENT CHANGE HISTORY
Revision Date Description of Change
A 2/23/2011 Document Control release
B 5/17/2012 ECN00301 adding 850A configuration
information. Added ITAR statements.
B 8/29/2012 ECN01438 – Administrative document change.
Remove ITAR statements.
iv Astronics Test Systems
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Publication No. 980972 Rev. B 850A/B User Manual
Chapter 1
Introduction
The 850A/B Contact Chatter Detector (Figures 1-1 and 1-2) is designed to
provide a means of monitoring the continuity of switch or relay contacts while
being subjected to environmental stress. The unit has 10 channels each with a
separate current source to activate the contacts. Contact current dial and X1–
X0.1 switch sets the current of all the channels simultaneously for 0.1 to 11
milliamps.
The difference between the two models is that the 850A uses BNCs for the
channel inputs and the 850B uses screw terminals.
Figure 1-1. Trig-Tek 850A Contact Chatter Detector
Figure 1-2. Trig-Tek 850B Contact Chatter Detector
Timing Interval Controls provide for setting from 1 to 999 microseconds or 1to
999 milliseconds for the maximum time a discontinuity can exist. Each channel
has a FAULT LED which will illuminate if a discontinuity exists for a longer period
Astronics Test Systems Introduction 1-1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Ce manuel convient aux modèles suivants
1
Table des matières
