ASTi LectroFan Micro Manuel utilisateur

Autres manuels pour LectroFan Micro

Table des matières

Autres manuels ASTi Système de haut-parleurs

ASTi

ASTi SOUND+SLEEP SE Manuel utilisateur

Manuels Système de haut-parleurs populaires d'autres marques

JVC

JVC CA-MXK5R Manuel utilisateur

LG NB4532B Manuel utilisateur

JVC

JVC CA-FSH100 Manuel utilisateur

5Core

5Core Pro Series Manuel utilisateur

EAW

EAW MQV1394e Manuel utilisateur

Lynx

Lynx GXR-LA10A Manuel utilisateur

iLive

iLive ITB066B Manuel utilisateur

RDX

RDX QuickStation 4 Manuel utilisateur

Electro-Voice

Electro-Voice S-122 Manuel utilisateur

Sven

Sven SPS-619 GOLD Manuel utilisateur

Pioneer

Pioneer CS-7070 Manuel utilisateur

EAW

EAW UB82e Manuel utilisateur

Sondpex

Sondpex Active Speaker System and Digital Music... Manuel utilisateur

JVC

JVC NX-PN7 Manuel utilisateur

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuel utilisateur

Yamaha

Yamaha NX-A01 - Speaker Sys Manuel utilisateur

SE Audiotechnik

SE Audiotechnik I-LINE Manuel utilisateur

Gemini

Gemini WRX-843 Series Manuel utilisateur

•

1 2 3 4

•

5 6

•

LectroFan micro is a

revolutionary sound machine

and wireless portable audio device

combining the latest Bluetooth®

speaker technology and the

acclaimed sleep sound science of

Adaptive Sound Technologies,Inc.

You can mask noises, relax, and

sleep better using 10 dierent

sounds including four white noise

selections, ﬁve fan sounds, or

the ocean waves SoundScape.The

distinctive speaker design swivels

up or down to easily ﬁt anywhere

and be rotated for directional

sound control. Simply turn the

top part of the LectroFan micro

to adjust it as you like.

All of this capability is controlled

by three buttons, as shown in the

images above.

Each button has two types

of actions:

1. The ﬁrst action (Power On/Oﬀ,

Volume Up, or Volume Down) is

activated by holding down the

button for at least a couple of

seconds—called a “Long Press.”

2.The second action (Play/Pause,

Previous Sound/Song, or

Next Sound/Song) is activated

by brieﬂy pressing the button—

called a “Short Press.”

Before you can use your LectroFan

micro as a Bluetooth speaker, you

need to pair it with your audio source,

such as your smart phone. This only

needs to be done once for each

audio source.

1. First, turn on the Bluetooth feature

of your LectroFan micro with a Long

Press of the Power/Pause button.

You will hear the tones indicating

that the Bluetooth feature is turning

on and the Blue status light will ﬂash.

2. Set your audio source to look for

new Bluetooth devices and select

the LectroFan micro device. If a PIN

is required, use 0000. Two tones will

indicate that the pairing is complete.

See your audio source’s instructions

for pairing, if needed.

I. When your LectroFan micro is oﬀ:

A Short Press of the Power/Pause

button will turn the Sound Masking

feature On.

2. When your LectroFan micro is on:

A Short Press of the Power/Pause

button will turn your LectroFan

micro O ﬀ .

using your LectroFan micro as sound masKing maChine

using your LectroFan micro as a BLuetooth sPeaKer

When choosing your SoundStory:

1. Short Pressing the V+/<< button

will select the Previous SoundStory.

2. Short Pressing the V-/>> button

will select the Next SoundStory.

– Long Presses of either of these

last two buttons will adjust the

volume of the micro.

* Note: to max volume on micro,

ensure your playback device is

raised to max volume.

Once paired and connected, you

can change the volume with a

Long Press of the V+/<< or V-/>>

keys to increase or decrease the

volume. Pressing the Power/Pause

button brieﬂy will pause the audio

and pressing it again will resume

the audio.

A Long Press of the Power/Pause

button will turn your LectroFan

micro Oﬀ, when in Bluetooth

Speaker mode.

When paired and connected to

a smart phone, you can answer an

incoming phone call with a Short

Press of the Power/Pause button.

Another Short Press of the Power/

Pause button will end the call. During

the phone call, the audio stream will

be paused.

LoCation of Parts

and ControLs

1. Microphone

2.Power/Play/Pause Button

3.Volume +/Track Back Button

4.Volume –/Track FWD Button

5.LED Indicator

6.Micro USB Charging Port

7. Micro USB Charging Cable

(not shown)

•

1 2 3 4

•

5 6

•

LectroFan micro is a

revolutionary sound machine

and wireless portable audio device

combining the latest Bluetooth®

speaker technology and the

acclaimed sleep sound science of

Adaptive Sound Technologies,Inc.

You can mask noises, relax, and

sleep better using 10 dierent

sounds including four white noise

selections, ﬁve fan sounds, or

the ocean waves SoundScape.The

distinctive speaker design swivels

up or down to easily ﬁt anywhere

and be rotated for directional

sound control. Simply turn the

top part of the LectroFan micro

to adjust it as you like.

All of this capability is controlled

by three buttons, as shown in the

images above.

Each button has two types

of actions:

1. The ﬁrst action (Power On/Oﬀ,

Volume Up, or Volume Down) is

activated by holding down the

button for at least a couple of

seconds—called a “Long Press.”

2.The second action (Play/Pause,

Previous Sound/Song, or

Next Sound/Song) is activated

by brieﬂy pressing the button—

called a “Short Press.”

Before you can use your LectroFan

micro as a Bluetooth speaker, you

need to pair it with your audio source,

such as your smart phone. This only

needs to be done once for each

audio source.

1. First, turn on the Bluetooth feature

of your LectroFan micro with a Long

Press of the Power/Pause button.

You will hear the tones indicating

that the Bluetooth feature is turning

on and the Blue status light will ﬂash.

2. Set your audio source to look for

new Bluetooth devices and select

the LectroFan micro device. If a PIN

is required, use 0000. Two tones will

indicate that the pairing is complete.

See your audio source’s instructions

for pairing, if needed.

I. When your LectroFan micro is oﬀ:

A Short Press of the Power/Pause

button will turn the Sound Masking

feature On.

2. When your LectroFan micro is on:

A Short Press of the Power/Pause

button will turn your LectroFan

micro O ﬀ .

using your LectroFan micro as sound masKing maChine

using your LectroFan micro as a BLuetooth sPeaKer

When choosing your SoundStory:

1. Short Pressing the V+/<< button

will select the Previous SoundStory.

2. Short Pressing the V-/>> button

will select the Next SoundStory.

– Long Presses of either of these

last two buttons will adjust the

volume of the micro.

* Note: to max volume on micro,

ensure your playback device is

raised to max volume.

Once paired and connected, you

can change the volume with a

Long Press of the V+/<< or V-/>>

keys to increase or decrease the

volume. Pressing the Power/Pause

button brieﬂy will pause the audio

and pressing it again will resume

the audio.

A Long Press of the Power/Pause

button will turn your LectroFan

micro Oﬀ, when in Bluetooth

Speaker mode.

When paired and connected to

a smart phone, you can answer an

incoming phone call with a Short

Press of the Power/Pause button.

Another Short Press of the Power/

Pause button will end the call. During

the phone call, the audio stream will

be paused.

LoCation of Parts

and ControLs

1. Microphone

2.Power/Play/Pause Button

3.Volume +/Track Back Button

4.Volume –/Track FWD Button

5.LED Indicator

6.Micro USB Charging Port

7. Micro USB Charging Cable

(not shown)

•

1 2 3 4

•

5 6

•

LectroFan micro is a

revolutionary sound machine

and wireless portable audio device

combining the latest Bluetooth®

speaker technology and the

acclaimed sleep sound science of

Adaptive Sound Technologies,Inc.

You can mask noises, relax, and

sleep better using 10 dierent

sounds including four white noise

selections, ﬁve fan sounds, or

the ocean waves SoundScape.The

distinctive speaker design swivels

up or down to easily ﬁt anywhere

and be rotated for directional

sound control. Simply turn the

top part of the LectroFan micro

to adjust it as you like.

All of this capability is controlled

by three buttons, as shown in the

images above.

Each button has two types

of actions:

1. The ﬁrst action (Power On/Oﬀ,

Volume Up, or Volume Down) is

activated by holding down the

button for at least a couple of

seconds—called a “Long Press.”

2.The second action (Play/Pause,

Previous Sound/Song, or

Next Sound/Song) is activated

by brieﬂy pressing the button—

called a “Short Press.”

Before you can use your LectroFan

micro as a Bluetooth speaker, you

need to pair it with your audio source,

such as your smart phone. This only

needs to be done once for each

audio source.

1. First, turn on the Bluetooth feature

of your LectroFan micro with a Long

Press of the Power/Pause button.

You will hear the tones indicating

that the Bluetooth feature is turning

on and the Blue status light will ﬂash.

2. Set your audio source to look for

new Bluetooth devices and select

the LectroFan micro device. If a PIN

is required, use 0000. Two tones will

indicate that the pairing is complete.

See your audio source’s instructions

for pairing, if needed.

I. When your LectroFan micro is oﬀ:

A Short Press of the Power/Pause

button will turn the Sound Masking

feature On.

2. When your LectroFan micro is on:

A Short Press of the Power/Pause

button will turn your LectroFan

micro O ﬀ .

using your LectroFan micro as sound masKing maChine

using your LectroFan micro as a BLuetooth sPeaKer

When choosing your SoundStory:

1. Short Pressing the V+/<< button

will select the Previous SoundStory.

2. Short Pressing the V-/>> button

will select the Next SoundStory.

– Long Presses of either of these

last two buttons will adjust the

volume of the micro.

* Note: to max volume on micro,

ensure your playback device is

raised to max volume.

Once paired and connected, you

can change the volume with a

Long Press of the V+/<< or V-/>>

keys to increase or decrease the

volume. Pressing the Power/Pause

button brieﬂy will pause the audio

and pressing it again will resume

the audio.

A Long Press of the Power/Pause

button will turn your LectroFan

micro Oﬀ, when in Bluetooth

Speaker mode.

When paired and connected to

a smart phone, you can answer an

incoming phone call with a Short

Press of the Power/Pause button.

Another Short Press of the Power/

Pause button will end the call. During

the phone call, the audio stream will

be paused.

LoCation of Parts

and ControLs

1. Microphone

2.Power/Play/Pause Button

3.Volume +/Track Back Button

4.Volume –/Track FWD Button

5.LED Indicator

6.Micro USB Charging Port

7. Micro USB Charging Cable

(not shown)

•

1 2 3 4

•

5 6

•

LectroFan micro is a

revolutionary sound machine

and wireless portable audio device

combining the latest Bluetooth®

speaker technology and the

acclaimed sleep sound science of

Adaptive Sound Technologies,Inc.

You can mask noises, relax, and

sleep better using 10 dierent

sounds including four white noise

selections, ﬁve fan sounds, or

the ocean waves SoundScape.The

distinctive speaker design swivels

up or down to easily ﬁt anywhere

and be rotated for directional

sound control. Simply turn the

top part of the LectroFan micro

to adjust it as you like.

All of this capability is controlled

by three buttons, as shown in the

images above.

Each button has two types

of actions:

1. The ﬁrst action (Power On/Oﬀ,

Volume Up, or Volume Down) is

activated by holding down the

button for at least a couple of

seconds—called a “Long Press.”

2.The second action (Play/Pause,

Previous Sound/Song, or

Next Sound/Song) is activated

by brieﬂy pressing the button—

called a “Short Press.”

Before you can use your LectroFan

micro as a Bluetooth speaker, you

need to pair it with your audio source,

such as your smart phone. This only

needs to be done once for each

audio source.

1. First, turn on the Bluetooth feature

of your LectroFan micro with a Long

Press of the Power/Pause button.

You will hear the tones indicating

that the Bluetooth feature is turning

on and the Blue status light will ﬂash.

2. Set your audio source to look for

new Bluetooth devices and select

the LectroFan micro device. If a PIN

is required, use 0000. Two tones will

indicate that the pairing is complete.

See your audio source’s instructions

for pairing, if needed.

I. When your LectroFan micro is oﬀ:

A Short Press of the Power/Pause

button will turn the Sound Masking

feature On.

2. When your LectroFan micro is on:

A Short Press of the Power/Pause

button will turn your LectroFan

micro O ﬀ .

using your LectroFan micro as sound masKing maChine

using your LectroFan micro as a BLuetooth sPeaKer

When choosing your SoundStory:

1. Short Pressing the V+/<< button

will select the Previous SoundStory.

2. Short Pressing the V-/>> button

will select the Next SoundStory.

– Long Presses of either of these

last two buttons will adjust the

volume of the micro.

* Note: to max volume on micro,

ensure your playback device is

raised to max volume.

Once paired and connected, you

can change the volume with a

Long Press of the V+/<< or V-/>>

keys to increase or decrease the

volume. Pressing the Power/Pause

button brieﬂy will pause the audio

and pressing it again will resume

the audio.

A Long Press of the Power/Pause

button will turn your LectroFan

micro Oﬀ, when in Bluetooth

Speaker mode.

When paired and connected to

a smart phone, you can answer an

incoming phone call with a Short

Press of the Power/Pause button.

Another Short Press of the Power/

Pause button will end the call. During

the phone call, the audio stream will

be paused.

LoCation of Parts

and ControLs

1. Microphone

2.Power/Play/Pause Button

3.Volume + /Track Back Button

4.Volume –/ Track FWD Button

5.LED Indicator

6.Micro USB Charging Port

7. Micro USB Charging Cable

(not shown)

Charging LectroFan micro

The LectroFan micro includes a

Lithium Ion rechargeable battery

for hours of cord-free enjoyment,

when a power source is not

conveniently available. When near

a power source, you can use your

LectroFan micro indeﬁnitely while

plugged into a power adapter, etc.

To charge the battery, plug the

micro USB plug of the included

power cable to the micro-USB

jack on LectroFan micro and the

USB-A end of the cable into a

power source, such as a standard

USB power adapter, a computer’s

USB jack, etc. While charging, the

LectroFan micro’s LED light will

glow red and will turn o after

the battery is charged.

resetting LectroFan micro

During normal use, LectroFan

micro should not need to be reset.

If you wish to perform a hard

reset, press the Power Button

and hold it for 15 seconds. A tone

will conﬁrm that the system has

been reset and a fan sound will

begin to play.

Battery PerformanCe

Note: The Fan and White Noise

sound can operate when

battery power is lower, but the

Bluetooth mode may require

higher battery charge. Please

ensure a strong battery charge

to use Bluetooth capability.

sPeCifiCations

Power: USB-A power source able to

supply 5 V at 1 Amp. (Not included)

Audio Output: 3 Watts or less

Bluetooth Compatibility:

Bluetooth 2.0 or greater

Bluetooth Range: 33 feet (10 meters)

Lithium-Ion Battery Capacity:

680 mAh

Battery Run Time:

- Up to 6 hours for bluetooth audio

- Up to 16 hours for white noise/

fan sounds

Battery Charge Time: 4 hours

Lithium-ion Battery

LectroFan micro contains a non-removable

lithium-ion battery. Local, state or federal

laws may prohibit disposal of lithium-ion

batteries in ordinary trash. Consult your

local waste authority for information

regarding available recycling and/or

disposal options.

software LiCensing

The software contained in the LectroFan

micro is licensed to you, not sold to you.

This is only to protect our intellectual

property and has no eect on your ability

to use the LectroFan micro wherever you

please. See http://asticorp.com/sw-license

for more information.

one year Limited warranty

Adaptive Sound Technologies, Inc., hereinafter

referred to as ASTI, warrants this product

against defects in materials and/or workman-

ship under normal use for a period of ONE (1)

YEAR from the date of purchase by the original

purchaser (“Warranty Period”). If a defect arises

and a valid claim is received within the Warranty

Period, at its option, ASTI will either 1) repair the

defect at no charge, using new or refurbished

replacement parts, or 2) replace the product

with a current product that is close in func-

tionality to the original product. A replacement

product or part, including a user-installable

part installed in accordance with instructions

provided by ASTI, is covered by the remaining

warranty of the original purchase.

When a product or part is exchanged, the

replacement item becomes your property and

the replaced item becomes ASTI’s property.

Obtaining Service: To obtain warranty service

please call, or email, your reseller. Please be

prepared to describe the product that needs

service and the nature of the problem. All

repairs and replacements must be authorized

in advance by your reseller. A purchase receipt

must accompany all returns. Service options,

parts availability and response times will vary.

Limits and Exclusions: This Limited Warranty

applies only to the LectroFan micro, and the

included power cable.

This warranty does not apply to: a) damage

caused by failure to follow instructions relating

to the product’s use or to the installation of

components; b) damage caused by accident,

abuse, misuse, ﬁre, ﬂoods, earthquake or other

external causes; c) damage caused by service

performed by anyone who is not a representa-

tive of ASTI; d) accessories used in conjunction

with a covered product; e) a product or part

that has been modiﬁed to alter functionality

or capability; f) any and all pre-existing condi-

tions that occur prior to the eective date of

this Limited Warranty relating to any product

sold “as is” including, without limitation, ﬂoor

demonstration models and refurbished items.

ASTI SHALL NOT BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM

THE USE OF THIS PRODUCT, OR ARISING OUT

OF ANY BREACH OF THIS WARRANTY. TO THE

EXTENT PERMITTED BY APPLICABLE LAW, ASTI

DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION,

WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND WARRANTIES

AGAINST HIDDEN OR LATENT DEFECTS. IF ASTI

CANNOT LAWFULLY DISCLAIM STATUTORY OR

IMPLIED WARRANTIES, THEN TO THE EXTENT

PERMITTED BY LAW, ALL SUCH WARRANTIES

SHALL BE LIMITED IN DURATION TO THE DURA-

TION OF THIS EXPRESS WARRANTY.

Some geographic areas disallow the exclusion

or limitation of incidental or consequential

damages or the length of an implied warranty.

As a consequence, some of the above exclu-

sions or limitations may not apply to buyers

residing in those areas. This warranty grants

speciﬁc legal rights to buyers, but other rights

may also be granted, which vary from country

to country, state to state, etc.

FCC Declaration

This equipment has been tested and found

to comply with the limits for a Class B Digital

Device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a resi-

dential installation. This equipment generates,

uses, and can radiate radio frequency energy,

and if not installed and used in accordance with

the instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or televi-

sion reception, which can be determined by

turning the equipment o and on, the user is

encouraged to try to correct the interference

by one or more of the following measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweenthe

equipment and receiver.

• Connecttheequipmenttoanoutletona

circuit dierent from the one to which the

receiver is connected.

• Consultthedealeroranexperiencedradio/

TV technician for help.

Declaration of Conformity Trade Name:

LectroFan micro

System Model Name: ASM1017

Responsible Party: Adaptive Sound

Technologies, Inc.

Address: 1475 South Bascom Avenue

Campbell, CA 95008 USA

Telephone Number: 1-408-377-3411

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired opera-

tion. Changes or modiﬁcations not expressly

approved by the party responsible for compli-

ance could void the user’s authority to operate

the equipment.

Technologies, and the ASTI logo are trademarks

or registered trademarks of Adaptive Sound

Technologies, Inc. All other marks, including

Bluetooth®, are registered trademarks of their

respective owners.

Charging LectroFan micro

The LectroFan micro includes a

Lithium Ion rechargeable battery

for hours of cord-free enjoyment,

when a power source is not

conveniently available. When near

a power source, you can use your

LectroFan micro indeﬁnitely while

plugged into a power adapter, etc.

To charge the battery, plug the

micro USB plug of the included

power cable to the micro-USB

jack on LectroFan micro and the

USB-A end of the cable into a

power source, such as a standard

USB power adapter, a computer’s

USB jack, etc. While charging, the

LectroFan micro’s LED light will

glow red and will turn o after

the battery is charged.

resetting LectroFan micro

During normal use, LectroFan

micro should not need to be reset.

If you wish to perform a hard

reset, press the Power Button

and hold it for 15 seconds. A tone

will conﬁrm that the system has

been reset and a fan sound will

begin to play.

Battery PerformanCe

Note: The Fan and White Noise

sound can operate when

battery power is lower, but the

Bluetooth mode may require

higher battery charge. Please

ensure a strong battery charge

to use Bluetooth capability.

sPeCifiCations

Power: USB-A power source able to

supply 5 V at 1 Amp. (Not included)

Audio Output: 3 Watts or less

Bluetooth Compatibility:

Bluetooth 2.0 or greater

Bluetooth Range: 33 feet (10 meters)

Lithium-Ion Battery Capacity:

680 mAh

Battery Run Time:

- Up to 6 hours for bluetooth audio

- Up to 16 hours for white noise/

fan sounds

Battery Charge Time: 4 hours

Lithium-ion Battery

LectroFan micro contains a non-removable

lithium-ion battery. Local, state or federal

laws may prohibit disposal of lithium-ion

batteries in ordinary trash. Consult your

local waste authority for information

regarding available recycling and/or

disposal options.

software LiCensing

The software contained in the LectroFan

micro is licensed to you, not sold to you.

This is only to protect our intellectual

property and has no eect on your ability

to use the LectroFan micro wherever you

please. See http://asticorp.com/sw-license

for more information.

one year Limited warranty

Adaptive Sound Technologies, Inc., hereinafter

referred to as ASTI, warrants this product

against defects in materials and/or workman-

ship under normal use for a period of ONE (1)

YEAR from the date of purchase by the original

purchaser (“Warranty Period”). If a defect arises

and a valid claim is received within the Warranty

Period, at its option, ASTI will either 1) repair the

defect at no charge, using new or refurbished

replacement parts, or 2) replace the product

with a current product that is close in func-

tionality to the original product. A replacement

product or part, including a user-installable

part installed in accordance with instructions

provided by ASTI, is covered by the remaining

warranty of the original purchase.

When a product or part is exchanged, the

replacement item becomes your property and

the replaced item becomes ASTI’s property.

Obtaining Service: To obtain warranty service

please call, or email, your reseller. Please be

prepared to describe the product that needs

service and the nature of the problem. All

repairs and replacements must be authorized

in advance by your reseller. A purchase receipt

must accompany all returns. Service options,

parts availability and response times will vary.

Limits and Exclusions: This Limited Warranty

applies only to the LectroFan micro, and the

included power cable.

This warranty does not apply to: a) damage

caused by failure to follow instructions relating

to the product’s use or to the installation of

components; b) damage caused by accident,

abuse, misuse, ﬁre, ﬂoods, earthquake or other

external causes; c) damage caused by service

performed by anyone who is not a representa-

tive of ASTI; d) accessories used in conjunction

with a covered product; e) a product or part

that has been modiﬁed to alter functionality

or capability; f) any and all pre-existing condi-

tions that occur prior to the eective date of

this Limited Warranty relating to any product

sold “as is” including, without limitation, ﬂoor

demonstration models and refurbished items.

ASTI SHALL NOT BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM

THE USE OF THIS PRODUCT, OR ARISING OUT

OF ANY BREACH OF THIS WARRANTY. TO THE

EXTENT PERMITTED BY APPLICABLE LAW, ASTI

DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION,

WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND WARRANTIES

AGAINST HIDDEN OR LATENT DEFECTS. IF ASTI

CANNOT LAWFULLY DISCLAIM STATUTORY OR

IMPLIED WARRANTIES, THEN TO THE EXTENT

PERMITTED BY LAW, ALL SUCH WARRANTIES

SHALL BE LIMITED IN DURATION TO THE DURA-

TION OF THIS EXPRESS WARRANTY.

Some geographic areas disallow the exclusion

or limitation of incidental or consequential

damages or the length of an implied warranty.

As a consequence, some of the above exclu-

sions or limitations may not apply to buyers

residing in those areas. This warranty grants

speciﬁc legal rights to buyers, but other rights

may also be granted, which vary from country

to country, state to state, etc.

FCC Declaration

This equipment has been tested and found

to comply with the limits for a Class B Digital

Device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a resi-

dential installation. This equipment generates,

uses, and can radiate radio frequency energy,

and if not installed and used in accordance with

the instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or televi-

sion reception, which can be determined by

turning the equipment o and on, the user is

encouraged to try to correct the interference

by one or more of the following measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweenthe

equipment and receiver.

• Connecttheequipmenttoanoutletona

circuit dierent from the one to which the

receiver is connected.

• Consultthedealeroranexperiencedradio/

TV technician for help.

Declaration of Conformity Trade Name:

LectroFan micro

System Model Name: ASM1017

Responsible Party: Adaptive Sound

Technologies, Inc.

Address: 1475 South Bascom Avenue

Campbell, CA 95008 USA

Telephone Number: 1-408-377-3411

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired opera-

tion. Changes or modiﬁcations not expressly

approved by the party responsible for compli-

ance could void the user’s authority to operate

the equipment.

Technologies, and the ASTI logo are trademarks

or registered trademarks of Adaptive Sound

Technologies, Inc. All other marks, including

Bluetooth®, are registered trademarks of their

respective owners.

Charging LectroFan micro

The LectroFan micro includes a

Lithium Ion rechargeable battery

for hours of cord-free enjoyment,

when a power source is not

conveniently available. When near

a power source, you can use your

LectroFan micro indeﬁnitely while

plugged into a power adapter, etc.

To charge the battery, plug the

micro USB plug of the included

power cable to the micro-USB

jack on LectroFan micro and the

USB-A end of the cable into a

power source, such as a standard

USB power adapter, a computer’s

USB jack, etc. While charging, the

LectroFan micro’s LED light will

glow red and will turn o after

the battery is charged.

resetting LectroFan micro

During normal use, LectroFan

micro should not need to be reset.

If you wish to perform a hard

reset, press the Power Button

and hold it for 15 seconds. A tone

will conﬁrm that the system has

been reset and a fan sound will

begin to play.

Battery PerformanCe

Note: The Fan and White Noise

sound can operate when

battery power is lower, but the

Bluetooth mode may require

higher battery charge. Please

ensure a strong battery charge

to use Bluetooth capability.

sPeCifiCations

Power: USB-A power source able to

supply 5 V at 1 Amp. (Not included)

Audio Output: 3 Watts or less

Bluetooth Compatibility:

Bluetooth 2.0 or greater

Bluetooth Range: 33 feet (10 meters)

Lithium-Ion Battery Capacity:

680 mAh

Battery Run Time:

- Up to 6 hours for bluetooth audio

- Up to 16 hours for white noise/

fan sounds

Battery Charge Time: 4 hours

Lithium-ion Battery

LectroFan micro contains a non-removable

lithium-ion battery. Local, state or federal

laws may prohibit disposal of lithium-ion

batteries in ordinary trash. Consult your

local waste authority for information

regarding available recycling and/or

disposal options.

software LiCensing

The software contained in the LectroFan

micro is licensed to you, not sold to you.

This is only to protect our intellectual

property and has no eect on your ability

to use the LectroFan micro wherever you

please. See http://asticorp.com/sw-license

for more information.

one year Limited warranty

Adaptive Sound Technologies, Inc., hereinafter

referred to as ASTI, warrants this product

against defects in materials and/or workman-

ship under normal use for a period of ONE (1)

YEAR from the date of purchase by the original

purchaser (“Warranty Period”). If a defect arises

and a valid claim is received within the Warranty

Period, at its option, ASTI will either 1) repair the

defect at no charge, using new or refurbished

replacement parts, or 2) replace the product

with a current product that is close in func-

tionality to the original product. A replacement

product or part, including a user-installable

part installed in accordance with instructions

provided by ASTI, is covered by the remaining

warranty of the original purchase.

When a product or part is exchanged, the

replacement item becomes your property and

the replaced item becomes ASTI’s property.

Obtaining Service: To obtain warranty service

please call, or email, your reseller. Please be

prepared to describe the product that needs

service and the nature of the problem. All

repairs and replacements must be authorized

in advance by your reseller. A purchase receipt

must accompany all returns. Service options,

parts availability and response times will vary.

Limits and Exclusions: This Limited Warranty

applies only to the LectroFan micro, and the

included power cable.

This warranty does not apply to: a) damage

caused by failure to follow instructions relating

to the product’s use or to the installation of

components; b) damage caused by accident,

abuse, misuse, ﬁre, ﬂoods, earthquake or other

external causes; c) damage caused by service

performed by anyone who is not a representa-

tive of ASTI; d) accessories used in conjunction

with a covered product; e) a product or part

that has been modiﬁed to alter functionality

or capability; f) any and all pre-existing condi-

tions that occur prior to the eective date of

this Limited Warranty relating to any product

sold “as is” including, without limitation, ﬂoor

demonstration models and refurbished items.

ASTI SHALL NOT BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM

THE USE OF THIS PRODUCT, OR ARISING OUT

OF ANY BREACH OF THIS WARRANTY. TO THE

EXTENT PERMITTED BY APPLICABLE LAW, ASTI

DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION,

WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND WARRANTIES

AGAINST HIDDEN OR LATENT DEFECTS. IF ASTI

CANNOT LAWFULLY DISCLAIM STATUTORY OR

IMPLIED WARRANTIES, THEN TO THE EXTENT

PERMITTED BY LAW, ALL SUCH WARRANTIES

SHALL BE LIMITED IN DURATION TO THE DURA-

TION OF THIS EXPRESS WARRANTY.

Some geographic areas disallow the exclusion

or limitation of incidental or consequential

damages or the length of an implied warranty.

As a consequence, some of the above exclu-

sions or limitations may not apply to buyers

residing in those areas. This warranty grants

speciﬁc legal rights to buyers, but other rights

may also be granted, which vary from country

to country, state to state, etc.

FCC Declaration

This equipment has been tested and found

to comply with the limits for a Class B Digital

Device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a resi-

dential installation. This equipment generates,

uses, and can radiate radio frequency energy,

and if not installed and used in accordance with

the instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or televi-

sion reception, which can be determined by

turning the equipment o and on, the user is

encouraged to try to correct the interference

by one or more of the following measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweenthe

equipment and receiver.

• Connecttheequipmenttoanoutletona

circuit dierent from the one to which the

receiver is connected.

• Consultthedealeroranexperiencedradio/

TV technician for help.

Declaration of Conformity Trade Name:

LectroFan micro

System Model Name: ASM1017

Responsible Party: Adaptive Sound

Technologies, Inc.

Address: 1475 South Bascom Avenue

Campbell, CA 95008 USA

Telephone Number: 1-408-377-3411

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired opera-

tion. Changes or modiﬁcations not expressly

approved by the party responsible for compli-

ance could void the user’s authority to operate

the equipment.

Technologies, and the ASTI logo are trademarks

or registered trademarks of Adaptive Sound

Technologies, Inc. All other marks, including

Bluetooth®, are registered trademarks of their

respective owners.

Charging LectroFan micro

The LectroFan micro includes a

Lithium Ion rechargeable battery

for hours of cord-free enjoyment,

when a power source is not

conveniently available. When near

a power source, you can use your

LectroFan micro indeﬁnitely while

plugged into a power adapter, etc.

To charge the battery, plug the

micro USB plug of the included

power cable to the micro-USB

jack on LectroFan micro and the

USB-A end of the cable into a

power source, such as a standard

USB power adapter, a computer’s

USB jack, etc. While charging, the

LectroFan micro’s LED light will

glow red and will turn o after

the battery is charged.

resetting LectroFan micro

During normal use, LectroFan

micro should not need to be reset.

If you wish to perform a hard

reset, press the Power Button

and hold it for 15 seconds. A tone

will conﬁrm that the system has

been reset and a fan sound will

begin to play.

Battery PerformanCe

Note: The Fan and White Noise

sound can operate when

battery power is lower, but the

Bluetooth mode may require

higher battery charge. Please

ensure a strong battery charge

to use Bluetooth capability.

sPeCifiCations

Power: USB-A power source able to

supply 5 V at 1 Amp. (Not included)

Audio Output: 3 Watts or less

Bluetooth Compatibility:

Bluetooth 2.0 or greater

Bluetooth Range: 33 feet (10 meters)

Lithium-Ion Battery Capacity:

680 mAh

Battery Run Time:

- Up to 6 hours for bluetooth audio

- Up to 16 hours for white noise/

fan sounds

Battery Charge Time: 4 hours

Lithium-ion Battery

LectroFan micro contains a non-removable

lithium-ion battery. Local, state or federal

laws may prohibit disposal of lithium-ion

batteries in ordinary trash. Consult your

local waste authority for information

regarding available recycling and/or

disposal options.

software LiCensing

The software contained in the LectroFan

micro is licensed to you, not sold to you.

This is only to protect our intellectual

property and has no eect on your ability

to use the LectroFan micro wherever you

please. See http://asticorp.com/sw-license

for more information.

one year Limited warranty

Adaptive Sound Technologies, Inc., hereinafter

referred to as ASTI, warrants this product

against defects in materials and/or workman-

ship under normal use for a period of ONE (1)

YEAR from the date of purchase by the original

purchaser (“Warranty Period”). If a defect arises

and a valid claim is received within the Warranty

Period, at its option, ASTI will either 1) repair the

defect at no charge, using new or refurbished

replacement parts, or 2) replace the product

with a current product that is close in func-

tionality to the original product. A replacement

product or part, including a user-installable

part installed in accordance with instructions

provided by ASTI, is covered by the remaining

warranty of the original purchase.

When a product or part is exchanged, the

replacement item becomes your property and

the replaced item becomes ASTI’s property.

Obtaining Service: To obtain warranty service

please call, or email, your reseller. Please be

prepared to describe the product that needs

service and the nature of the problem. All

repairs and replacements must be authorized

in advance by your reseller. A purchase receipt

must accompany all returns. Service options,

parts availability and response times will vary.

Limits and Exclusions: This Limited Warranty

applies only to the LectroFan micro, and the

included power cable.

This warranty does not apply to: a) damage

caused by failure to follow instructions relating

to the product’s use or to the installation of

components; b) damage caused by accident,

abuse, misuse, ﬁre, ﬂoods, earthquake or other

external causes; c) damage caused by service

performed by anyone who is not a representa-

tive of ASTI; d) accessories used in conjunction

with a covered product; e) a product or part

that has been modiﬁed to alter functionality

or capability; f) any and all pre-existing condi-

tions that occur prior to the eective date of

this Limited Warranty relating to any product

sold “as is” including, without limitation, ﬂoor

demonstration models and refurbished items.

ASTI SHALL NOT BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM

THE USE OF THIS PRODUCT, OR ARISING OUT

OF ANY BREACH OF THIS WARRANTY. TO THE

EXTENT PERMITTED BY APPLICABLE LAW, ASTI

DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION,

WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND WARRANTIES

AGAINST HIDDEN OR LATENT DEFECTS. IF ASTI

CANNOT LAWFULLY DISCLAIM STATUTORY OR

IMPLIED WARRANTIES, THEN TO THE EXTENT

PERMITTED BY LAW, ALL SUCH WARRANTIES

SHALL BE LIMITED IN DURATION TO THE DURA-

TION OF THIS EXPRESS WARRANTY.

Some geographic areas disallow the exclusion

or limitation of incidental or consequential

damages or the length of an implied warranty.

As a consequence, some of the above exclu-

sions or limitations may not apply to buyers

residing in those areas. This warranty grants

speciﬁc legal rights to buyers, but other rights

may also be granted, which vary from country

to country, state to state, etc.

FCC Declaration

This equipment has been tested and found

to comply with the limits for a Class B Digital

Device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a resi-

dential installation. This equipment generates,

uses, and can radiate radio frequency energy,

and if not installed and used in accordance with

the instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or televi-

sion reception, which can be determined by

turning the equipment o and on, the user is

encouraged to try to correct the interference

by one or more of the following measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweenthe

equipment and receiver.

• Connecttheequipmenttoanoutletona

circuit dierent from the one to which the

receiver is connected.

• Consultthedealeroranexperiencedradio/

TV technician for help.

Declaration of Conformity Trade Name:

LectroFan micro

System Model Name: ASM1017

Responsible Party: Adaptive Sound

Technologies, Inc.

Address: 1475 South Bascom Avenue

Campbell, CA 95008 USA

Telephone Number: 1-408-377-3411

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired opera-

tion. Changes or modiﬁcations not expressly

approved by the party responsible for compli-

ance could void the user’s authority to operate

the equipment.

Technologies, and the ASTI logo are trademarks

or registered trademarks of Adaptive Sound

Technologies, Inc. All other marks, including

Bluetooth®, are registered trademarks of their

respective owners.

Charging LectroFan micro

The LectroFan micro includes a

Lithium Ion rechargeable battery

for hours of cord-free enjoyment,

when a power source is not

conveniently available. When near

a power source, you can use your

LectroFan micro indeﬁnitely while

plugged into a power adapter, etc.

To charge the battery, plug the

micro USB plug of the included

power cable to the micro-USB

jack on LectroFan micro and the

USB-A end of the cable into a

power source, such as a standard

USB power adapter, a computer’s

USB jack, etc. While charging, the

LectroFan micro’s LED light will

glow red and will turn o after

the battery is charged.

resetting LectroFan micro

During normal use, LectroFan

micro should not need to be reset.

If you wish to perform a hard

reset, press the Power Button

and hold it for 15 seconds. A tone

will conﬁrm that the system has

been reset and a fan sound will

begin to play.

Battery PerformanCe

Note: The Fan and White Noise

sound can operate when

battery power is lower, but the

Bluetooth mode may require

higher battery charge. Please

ensure a strong battery charge

to use Bluetooth capability.

sPeCifiCations

Power: USB-A power source able to

supply 5 V at 1 Amp. (Not included)

Audio Output: 3 Watts or less

Bluetooth Compatibility:

Bluetooth 2.0 or greater

Bluetooth Range: 33 feet (10 meters)

Lithium-Ion Battery Capacity:

680 mAh

Battery Run Time:

- Up to 6 hours for bluetooth audio

- Up to 16 hours for white noise/

fan sounds

Battery Charge Time: 4 hours

Lithium-ion Battery

LectroFan micro contains a non-removable

lithium-ion battery. Local, state or federal

laws may prohibit disposal of lithium-ion

batteries in ordinary trash. Consult your

local waste authority for information

regarding available recycling and/or

disposal options.

software LiCensing

The software contained in the LectroFan

micro is licensed to you, not sold to you.

This is only to protect our intellectual

property and has no eect on your ability

to use the LectroFan micro wherever you

please. See http://asticorp.com/sw-license

for more information.

one year Limited warranty

Adaptive Sound Technologies, Inc., hereinafter

referred to as ASTI, warrants this product

against defects in materials and/or workman-

ship under normal use for a period of ONE (1)

YEAR from the date of purchase by the original

purchaser (“Warranty Period”). If a defect arises

and a valid claim is received within the Warranty

Period, at its option, ASTI will either 1) repair the

defect at no charge, using new or refurbished

replacement parts, or 2) replace the product

with a current product that is close in func-

tionality to the original product. A replacement

product or part, including a user-installable

part installed in accordance with instructions

provided by ASTI, is covered by the remaining

warranty of the original purchase.

When a product or part is exchanged, the

replacement item becomes your property and

the replaced item becomes ASTI’s property.

Obtaining Service: To obtain warranty service

please call, or email, your reseller. Please be

prepared to describe the product that needs

service and the nature of the problem. All

repairs and replacements must be authorized

in advance by your reseller. A purchase receipt

must accompany all returns. Service options,

parts availability and response times will vary.

Limits and Exclusions: This Limited Warranty

applies only to the LectroFan micro, and the

included power cable.

This warranty does not apply to: a) damage

caused by failure to follow instructions relating

to the product’s use or to the installation of

components; b) damage caused by accident,

abuse, misuse, ﬁre, ﬂoods, earthquake or other

external causes; c) damage caused by service

performed by anyone who is not a representa-

tive of ASTI; d) accessories used in conjunction

with a covered product; e) a product or part

that has been modiﬁed to alter functionality

or capability; f) any and all pre-existing condi-

tions that occur prior to the eective date of

this Limited Warranty relating to any product

sold “as is” including, without limitation, ﬂoor

demonstration models and refurbished items.

ASTI SHALL NOT BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM

THE USE OF THIS PRODUCT, OR ARISING OUT

OF ANY BREACH OF THIS WARRANTY. TO THE

EXTENT PERMITTED BY APPLICABLE LAW, ASTI

DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION,

WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND WARRANTIES

AGAINST HIDDEN OR LATENT DEFECTS. IF ASTI

CANNOT LAWFULLY DISCLAIM STATUTORY OR

IMPLIED WARRANTIES, THEN TO THE EXTENT

PERMITTED BY LAW, ALL SUCH WARRANTIES

SHALL BE LIMITED IN DURATION TO THE DURA-

TION OF THIS EXPRESS WARRANTY.

Some geographic areas disallow the exclusion

or limitation of incidental or consequential

damages or the length of an implied warranty.

As a consequence, some of the above exclu-

sions or limitations may not apply to buyers

residing in those areas. This warranty grants

speciﬁc legal rights to buyers, but other rights

may also be granted, which vary from country

to country, state to state, etc.

FCC Declaration

This equipment has been tested and found

to comply with the limits for a Class B Digital

Device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a resi-

dential installation. This equipment generates,

uses, and can radiate radio frequency energy,

and if not installed and used in accordance with

the instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or televi-

sion reception, which can be determined by

turning the equipment o and on, the user is

encouraged to try to correct the interference

by one or more of the following measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweenthe

equipment and receiver.

• Connecttheequipmenttoanoutletona

circuit dierent from the one to which the

receiver is connected.

• Consultthedealeroranexperiencedradio/

TV technician for help.

Declaration of Conformity Trade Name:

LectroFan micro

System Model Name: ASM1017

Responsible Party: Adaptive Sound

Technologies, Inc.

Address: 1475 South Bascom Avenue

Campbell, CA 95008 USA

Telephone Number: 1-408-377-3411

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired opera-

tion. Changes or modiﬁcations not expressly

approved by the party responsible for compli-

ance could void the user’s authority to operate

the equipment.

Technologies, and the ASTI logo are trademarks

or registered trademarks of Adaptive Sound

Technologies, Inc. All other marks, including

Bluetooth®, are registered trademarks of their

respective owners.