AST System ASTmidi Manuel utilisateur
www.astsystem.pl | ast@astsystem.pl
2
Table of contents
1. Introduction ........................................................................................................................................................3
2. Technical parameters, characteristics..................................................................................................................4
2.1 Technical parameters ........................................................................................................................................4
2.2 Characteristics...................................................................................................................................................4
3. Connection diagram............................................................................................................................................6
4. Installation of ASTmobile applications .................................................................................................................7
5. Work with the driver ...........................................................................................................................................9
5.1 Establishing a connection to the driver using ASTmobile application .................................................................9
5.2 Driver PIN........................................................................................................................................................11
5.3 Driver name and description ...........................................................................................................................11
5.4 Driver date and time .......................................................................................................................................12
5.5 Switch-on and switch-off times of the outputs ................................................................................................13
5.5.1 Algorithm for determining switch-on/off times ..................................................................................13
5.5.2 Driver position ...................................................................................................................................14
5.5.3 Output operating time .......................................................................................................................15
5.6 Output mode.............................................................................................................................................15
5.6.1 Day operation mode (lighting day / 24-hour day) ...............................................................................16
5.6.2 Correction mode................................................................................................................................17
5.6.3 Switching intervals.............................................................................................................................18
5.7 Input mode................................................................................................................................................21
5.7.1 Photocell configuration......................................................................................................................21
5.7.2 Cascade configuration........................................................................................................................22
5.8 Service switching .......................................................................................................................................23
5.9 Exceptions .................................................................................................................................................27
5.10 Recording events.......................................................................................................................................28
5.11 Replacement of internal driver software .......................................................................................................30
5.12 Factory settings .............................................................................................................................................31
www.astsystem.pl | ast@astsystem.pl
3
1. Introduction
ASTmidi / ASTmidi GPS - a street lighting driver. It has two or three independent outputs, a photocell/cascade input
and a built-in Bluetooth. ASTmidi / ASTmidi GPS, depending on the GPS position, will calculate the optimal lighting
control time. If you want, you can modify the parameters for summer/winter, each month, day of the week, and 20
exceptions. You can protect your ASTmidi / ASTmidi GPS with a password and find it on the map, and with report data
you can fine-tune your settings.
ASTmobile - higher performance and work comfort are not only given to you by a driver adapted to your needs, but it
is also an application that so many have forgotten about. We are the first company to give you a powerful tool,
completely free of charge. ASTmobile. It's an application for your phone which will make working with the driver easy,
fast and fully professional. You will find your AST directly from your car, without opening the cabinet, see how it is set
up, modify the parameters and as part of the service switch on lighting if needed. You can remotely read its time,
switch-on times, map location and download reports. On the map you can find your driver offline and Google Maps
Navigation will lead you to it.
The ASTmidi driver is available in 2 output versions: 2 or 3 outputs.
ASTmidi comes in standard (ASTmidi) and GPS (ASTmidi GPS) versions. GPS can have a built-in or external antenna.
This manual describes the 3-output model for ASTmidi and ASTmidi GPS.
In the 2-output version, output C is inactive.
www.astsystem.pl | ast@astsystem.pl
4
2. Technical parameters, characteristics
2.1 Technical parameters
supply voltage: 85 - 305V AC / 50 Hz
number of outputs. 2/3 - independently programmable
Current ratings of the outputs: 5 A / 230 VAC
number of inputs: 1 - voltage input 230 VAC
cable size: 2.5 mm2 / AWG14
battery backup: 5 years
interface: Smart Bluetooth 4.0
Dimensions (width/height/depth): 53 mm x 95 mm x 58 mm
operating temperature: -30˚C to +80˚C
tightness: IP 20
DIN rail mounting 35mm
2.2 Characteristics
full control and management via phone, smartphone, tablet from the AST mobile application
intuitive application interface for easy entry of driver settings
free AST mobile application
Smart Bluetooth 4.0 communication
possibility of time synchronization according to GPS (or for phone without GPS)
automatic change of summer/winter time
astronomical switch-on and switch-on times calculated from the GPS position or taken from a table
built-in switch-on table and possibility of its editing and reloading to the driver by means of Bluetooth
automatic driver location on the AST mobile application map
2 or 3 independently programmable outputs with a possibility of entering up to 4 switching intervals for
each day of the week
20 exceptions to the switch-ons.
3 operating correction modes for astronomical summer-winter, quarterly, monthly switch-ons
Possibility of service switching of the A and B outputs for 1, 10, 30 minutes and permanently.
recording of events (switching on/off the A output, switching on/off the B output, switching on/off input 1,
power failure, power return) up to 600 records
possibility of sending recorded events from the application via e-mail, MMS, etc.
possibility of saving the current driver configuration as a settings bank and possibility of sending from the
application via e-mail, Bluetooth, etc.
www.astsystem.pl | ast@astsystem.pl
5
registration of operating time of A, B and C outputs
cooperation with photocell
cooperation with cascade signal
possibility of remote exchange of internal driver software by means of Bluetooth from the AST mobile
applications
LEDs on the front panel indicating the status of A, B and C outputs and power supply
blocking access to driver by means of PIN code and one-time passwords
possibility of restoring factory settings
www.astsystem.pl | ast@astsystem.pl
7
4. Installation of ASTmobile applications
In order to install AST mobile applications you have to meet three conditions:
You must have an Android phone version 4.0 or more recent.
The phone should have a minimum resolution of 480 x 800, for smaller resolutions the application may also
be installed, but some interface elements may not be displayed correctly.
You should have a Google account added to your device. Instructions on how to add an account can be found
at https://support.google.com/googleplay/answer/2521798?hl=en or watching the video on YouTube
https://www.youtube.com/watch?v=ibkJKgGUp1o
The AST mobile application interface is suitable for both smartphones and tablets.
There are two ways to install AST mobile:
Using the Google Play application on your phone, to do so run the application by pressing the icon , then
enter the phrase astmobile or ASTmidi in the search window and press the search icon, the application will
appear below the search window, as shown in the figure,
then select the ASTmobile position and the application description window will appear,
www.astsystem.pl | ast@astsystem.pl
8
then press the "Install" button, after a short while the AST mobile will be installed on your phone.
using the link https://play.google.com/store/apps/details?id=rob.astroterion.astmini or scanning the QR code
figure below.
After selecting the link or scanning the QR code, we will be moved directly to the window with application
description and then, as in the previous point, press the "Install" button.
After performing the above steps, the AST mobile application icon should appear in your phone .
www.astsystem.pl | ast@astsystem.pl
9
5. Work with the driver
The ASTmidi / ASTmidi GPS driver for factory settings is ready for operation. After connecting the power supply, driver
outputs will be switched on at sunset +15 minutes, and switched off at sunrise -15 minutes. Sunrise and sunset times
for factory settings are for the city of Warsaw. It is possible to sell the driver with programmed different location for
factory settings.
All parameters of the driver are subject to configuration. The AST mobile application is used to change them. In the
following sections it will be explained how to configure the driver using the ASTmobile application.
5.1 Establishing a connection to the driver using ASTmobile application
Assuming that you have an application installed on your phone, in order to establish a connection with the driver you
should press the icon to launch the AST mobile application. After a short time, the screen for selecting the
application operating mode will be displayed, see the figure below.
Select "Online drivers". This will bring up a window with a list of available ASTmidi drivers (the driver search time can
take up to 60 seconds, but it usually takes up to a few seconds).
www.astsystem.pl | ast@astsystem.pl
10
Then choose the position of our driver (for factory new drivers its name is AST-XXXXXX). This will cause a connection
to the controller and displaying the main application window and basic parameters of the driver such as date and time,
status of outputs, future switch-on times, etc. figure below.
Correct operation of the driver is the increasing amount of the driver time.
Table des matières
Manuels Équipement d'éclairage populaires d'autres marques
Qazqa
Qazqa Suplux SL 3 Black 103062 Manuel utilisateur
Commercial Electric
Commercial Electric 54568141 Manuel utilisateur
CREE LIGHTING
CREE LIGHTING 304 Series Manuel utilisateur
Goobay
Goobay 49867 Manuel utilisateur
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manuel utilisateur
Alkalite
Alkalite Krypton KT-81 Manuel utilisateur
