Askey TN450A1 Manuel utilisateur
TN450A1
QUICK START & REGULATORY GUIDE
TURBONET
Product Fe tures:
Product Specific tion:
Item Description
System
Processor Qualcomm MSM8960
Dual Core 1.5G z
Android OS Android Jeally Bean 4.2.2
Memory 1GB LPDDR2 SDRAM
Storage Internal 8GB eMMC Flash
(To be continued)
Displ y, C mer nd
Sc ning
Display
Size: 4.5"
Resolution: WVGA 720(W)*1280( )
Display Type: TFT, Transmissive
Contrast ratio: 900 (Typ)
Brightness: 400 nits (Typ)
Backlight Type: LED
Viewing Angle: 80/80/80/80 (typ), Full viewing (IPS)
Touch Panel
Capacitive Type, 5-point multiple touch, OGS
Glass: Dragontail, Anti-explosion, Wet Finger touch,
Strengthen Glass
Scanner
Opticon MDI-3100-SR
1D/2D Barcode ardware decode, CMOS sensor (black and
white)
Light source: Red*2 (auxiliary), Green*1 (aiming)
Effective pixel 752( )x 480(V) dot
Aiming distance: L=110+/-20mm(from front edge of camera
module)
Image capture speed: 60 fps
Supported barcode types:
UPC-A/E/E1/addon 2/5, EAN-13/addon 2/5, EAN-
8/addon 2/5,
Code 39, Tri-optic, Codebar, Industrial 2 of 5, Interleaved 2 to
5, S-code, Matrix 2 of 5, Chinese Post Matrix 2 of 5, Korean
Postal Authority, Intelligent Mail, POSTNET, Japanese Postal,
IATA, MSI/Plessey, Telepen, UK/ Plessey, Code 128/GSI 128,
CODE 93, CODE 11, GS1 Databar, GS1 Databar Limited, GS1
Databar Expanded, Codeablock F, DataMatrix ECC200,
DataMatrix ECC000-140, Aztec Code, Aztec Runes, Chinese
Sensible Code, QR Code, Micro QR Code, Maxi Code, PDF 417,
Micro PDF417, GS1 DataBar Composite, UPC/EAN Composite.
Front Camera No
Rear Camera
Sensor OmniVision MT9E013
Resolution: 8MP (3264 *2448V)
Angle of view: 74.5°C
Auto-Focus Type: VCM(Voice Coil Motor)
Focus Range: 10cm~ Infinity
Automatic Mode :
AEC (Auto exposure Control),
AGC (Auto Gain Control),
AWB (Auto White Balance),
Communic tion nd WLAN network
Radio
Support Voice Call
- LTE 3/7/8/20 (1800/2600/900/800M z)
- UMTS 1/3/5/8
(2100/1800/850/900M z)
- GSM 850/900/1800/1900
GPS Qualcomm GPS One Gen8, AGPS, Glonass
Bluetooth
4.0 Class II EDR
Profile: PAN, SP, ID, FTP, DUN, A2DP, AVRCP and OPP
profiles
WLAN 802.11 a/b/g/n Dual Band (2.4G/5G), Wi-Fi direct, Wi-Fi
hotspot (2.4G)
NFC (Optional)
NXP PN547
NFC detect range: 0~4cm
Card type: ISO/ICE 14443A/MIFARE; Jewel/Topaz tags; FeliCa
cards; ISO/IEC 14443B; ISO/IEC 15693/ICODE
Power
Battery Capacity 3450 mAh (3.7V)
Battery removable Non-removable
Battery Charging
Time 4.5 hours
Battery Life 10 hours
1
Reset Function Physical key under micro SD door
Charging method
(1) AC adaptor charging (via micro USB)
(2) docking station charging (no sleeve charging)
(3) battery cartridge
Wireless charger
(Optional) Qi (WPC V1.1) Compliant Power Supply
RTC Yes
Peripher l
Sensors
3-axis accelerometer
Proximity sensor
Ambient light sensor
Magnetometer
Gyroscope
GPS
Indicator
2pcs
(Indication of battery full, low battery, charging(including
wireless charging) and BT)
Receiver 1pcs
Audio Jack N/A
Vibrater 1pcs
Speaker 1pcs
Microphone 2pcs
I/O
Extension port On main board (internal). Please see pin define in Appendix 1
(P.13)
Micro USB 1pcs, OTG, software upgrade, battery charging
SD Card Micro SD (SD C can support up to 64GB)
SIM card Micro Dual SIM sockets
Buttons
Power*1
Volume (up and down)
Programmable key*3pcs
(original scan key*2pcs, original P key*1pcs)
1
Conditional and vary depending on different user scenario.
Mech nic l nd Environment
Dimension L 149.87 x W 80.24 x T 30.61 mm
Weight 345g
Ingress Protection IP65
Drop 1.5M on poly wood, 6 drops
ESD Air: ±8KV
Contact: ±4KV
Operating
Temperature (include
LCM and battery)
0°C~ 45°C battery in charging mode
-20°C+60°C battery in discharging mode
Storage Temperature
-20~+60°C
Accessories (in p ck ge)
Adaptor Jack 1pcs, 5.35V/2A
Micro USB to USB
Cable 1pcs, 100cm
and strap 1pcs
Micro SD / MicroSIM C rd Inst ll tion
Open MicroSD/MicroSIM door, insert the Micro SD into slot.
Insert Micro SIM into SIM slot.
(Note: SIM 1 is set as default network connection; SIM switch: Go to “Settings” in Android system
“SIM SWITC ” “Choose SIM” “SIM 2”)
Close the door after installation.
Getting St rted
Charge the battery
Before using the TN450A1, charge the battery using one of the following
accessories approved by TURBONET :
-Micro USB cable through PC
-Micro USB cable + Power Adaptor Jack
-Cradle Charging + DC Power Cable + Power Adaptor Jack
Left LED blinks in red indicating low and risk battery and stating red indicating
that the battery is charging. the LED becomes green when battery is fully
charged, then.
Power On TN450A1
Press and release the power button
Note:
Device turns to the modes as below by pressing power button key.
Suspend Mode
Press and release the power button to place the TN450A1 in suspend mode. In suspend mode
the device turns off the display and goes into a low power state to conserve battery power.
Power Off
To Power off the TN450A1, press and hold the button until the device option dialog box appears,
choose “Power off”. When the Power off dialog box appears, tap “OK”.
Reset
Reset the TN450A1 if application stop responding. Press and hold the power button until the
device options dialog box appears then touch Reset.
H rdw re Reset
If the TN450A1 stop responding, perform a hardware reset by long press power button.
D t C pture
Scan a Bar Code with Imager
1. Switch on the barcode
Go to “Settings” find Barcode Scan Slide Barcode Scan to “ON”
-Go to “B rcodeSc n” Type: To choose Barcode type
Settings
B rcode Sc n
-Select “ Beep”: To have beep sound after scan
-Select” Vibr te”: Need device vibration after scan
-Select” Autom tic C rri ge Return” Require to send enter key
automatically after scan
2. Launch a bar code reading application or use Data Wedge.
3. Point the exit window at the bar code
4. Press and hold the two side Scan button
Left/Right Side Key Set-up:
Go to “Settings” Select “Rem p button & Shortcut”
Table des matières
