ARZAMAN SmartPID SPC1000 Manuel utilisateur
User Manual
C2 General
SmartPID BBQ PRO –user manual
21-07-2019
Version 1.0
Information
User Manual
2
C2 General
Revisions
Date
Version
Changes to document
21/07/2019
1.0
Initial version
User Manual
3
C2 General
Table of Contents
1Overview on SmartPID BBQ ...................................................................................................................................... 5
1.1 Scope and Purpose............................................................................................................................................... 5
1.2 Technical characteristics................................................................................................................................... 5
1.3 Hardware Description........................................................................................................................................ 7
2Hardware Configuration............................................................................................................................................. 9
2.1 Probes Connection............................................................................................................................................... 9
..................................................................................................................................................................................................10
2.2 FOOD Master........................................................................................................................................................10
2.3 Fan Connection....................................................................................................................................................11
2.4 Servo / Aux Configuration..............................................................................................................................12
3Operating Principle.....................................................................................................................................................13
4SmartPID BBQ PRO Advanced Features.............................................................................................................14
4.1 Alarm Thresholds...............................................................................................................................................14
4.2 Lid Open Function..............................................................................................................................................15
4.3 Stall Function .......................................................................................................................................................15
4.4 REST Function .....................................................................................................................................................16
4.5 Differential cooking function (Control mode Advanced) ..................................................................17
4.6 Servo/Electro valve Management...............................................................................................................17
5Configuration Parameters........................................................................................................................................19
6Mode of operation .......................................................................................................................................................21
6.1 Monitor...................................................................................................................................................................21
6.2 Manual Mode........................................................................................................................................................22
6.3 Auto Mode.............................................................................................................................................................24
6.4 Advanced Mode...................................................................................................................................................25
7Wi-Fi Connection and remote management.....................................................................................................26
8WEB APP..........................................................................................................................................................................28
9Firmware Upgrade ......................................................................................................................................................32
10 Restore factory settings........................................................................................................................................33
User Manual
4
C2 General
Ensure that the product is always used as per specification.
Do not use the product near to flammable gas and/or explosive in order to prevent unpleasant
accidents.
Do not disassemble, change or touch internal parts of the product in order to avoid damage or
malfunction of the same.
Do not exceed nominal power of the outputs.
Do not touch terminals during operation.
Do not let pieces of metal or electrical wires, iron chippings or fillings in the product.
Do not let water or other liquids get in the product. The product is not protected by jets or splashing
water.
The product is sold in the form of a KIT with all tested components. The controller can be used also
with third-party components (probes and fans) taking responsibility to connect it. In the manual
there are brief explanations about the connection.
The product is powered at low voltage 5-12v; however, pay close attention making connections.
The producer assumes no liability for damage caused by third parties.
User Manual
5
C2 General
1Overview on SmartPID BBQ
1.1 Scope and Purpose
The purpose of this manual is to describe in detail the installation process and configuration of
SmartPID BBQ PRO controller, its application functions and remote control app.
1.2 Technical characteristics
The following table sums up SmartPID BBQ technical characteristics.
FUNCTIONS
SmartPID SPC1000
Control channels
1 PIT & 3 FOOD
Control mode
Monitor/Manual/Auto/Advanced
Fan control
PID-PWM with modulation 0-100%
Probes type
NTC 100 K @ 25c
Beta configuration (NTC)
YES multiple values
Fans support
PWM 4-wire
Unit of temperature
Celsius/Fahrenheit
Sensors calibration
YES
Precision
1%
Resolution
1C
Temperature range
0-220c
Power supply
5-12v DC
220V/110V AC Power supply
YES with external adapter
Battery power supply
YES 5V USB bank for outdoor usage
Controller box measurements
70 x 75 x 50
OLED graphic display
1,3"
USB port
YES
SD Card
YES micro
Wi-Fi connection
YES
User Manual
6
C2 General
Configuration/remote management
YES with universal web app (chrome, firefox, safari)
WI-FI module features
IEEE 802.11 b/g/n Wi-Fi
Authentication WEP or WPA/WPA2, or free networks 802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol
Integrated TR switch, balun, LAN, power amplifier
+19.5dBm output power in 802.11b mode
Power down leakage current of <10uA
Stand-by power consumption < 1.0mW (DTIM3)
KIT contents
User Manual
7
C2 General
1.3 Hardware Description
SmartPID BBQ PRO is made up of 2 main boards assembled and inserted in a small 75x70x50 box.
On the front panel there is the 1,5" OLED graphic display, buttons for user interface interactions.
On the side there are USB port for Firmware/data upgrade, microSD card slot and reset button.
Again, on the right side there are four 2.5mm jack for temperature probes connection (1 PIT + 3
FOOD). On the left side instead, there are connectors for PWM 4 wires fan connection and for servo-
assisted valve [for a further relief] and auxiliary output.
On the front there is the 5.5x2.1mm power connector instead.
The 4 front push buttons are used for several tasks:
USB
POWER 5-12v
SD card
PIT & FOOD
User Manual
8
C2 General
a) UP/DOWN
a. Scroll configuration menu
b. Increase/decrease temperature value
c. Increase/decrease fan speed
d. Scroll values on configuration menu
a) SET
e. Select/confirm a specific menu
f. Select/confirm a specific value
g. Confirm the action after request
b) Start/Stop
h. Start process
i. Stop process
j. Long press to exit the current menu
User Manual
9
C2 General
2Hardware Configuration
SmartPID BBQ PRO hardware configuration is quite simple and consists in connecting temperature
probes included in the kit, PWM 4-wire fan and supply.
2.1 Probes Connection
SmartPID BBQ PRO is equipped with 4 independent channels for the temperature of the grill (1 x PIT)
and of food (3 x FOOD) control.
Type NTC probes use 2.5mm connectors.
From the HW configuration menu, you can select “beta” value for each channel.
Supplied probes in the KIT have a beta value equal to 3950 (default value).
Finally, it is possible to make a temperature calibration, read by the probe with positive or negative
offset up to 5°C independently on each channel.
User Manual
10
C2 General
2.2 FOOD Master
SmartPID PRO controller features 3 inputs for temperature probes, one of these inputs assumes the
role of FOOD MASTER. All advanced control functions requiring a “food” temperature value, always
relate to FOOD MASTER.
From HW configuration menu it is possible to determine which of 3 food channels is MASTER to
controller ignition.
During the control process it is always possible to change the assignment of food master, both from
the menu and from the remote control web app.
During run mode, to change default assignment you should press SET button and then select with
Up/Down buttons master probe and confirm again using SET button.
Table des matières
Autres manuels ARZAMAN Contrôleurs
