Arvento Treyki Manuel utilisateur
www.treyki.com www.treyki.com
GPS Mini-Tracking Device
INTRODUCTION &
USER GUIDE
Arvento Mobil Sistemler A.Ş.
Cyberpark, Cyberplaza A Blok 5.Kat
No:501-A, 06800 Bilkent / ANKARA
P: +090 312 265 0595
F: +090 312 265 0544
GPS Mini-Tracking Device
CONTENTS
1. Introduction
1.1. Product Description 02
1.2. Main Features 03
1.3. Package Content 04
2. Getting Started 05
2.1. Charging the Battery 05
2.2. Install SIM Card 06
2.3. Appearance 07
2.4. Button Description 08
2.5. LED Indicators 09
2.5.1. Normal Operation 09
2.5.2. Voice Call 10
3. Operating the Device 11
3.1. Turn On / Off 11
3.2. Voice Call 11
4. Technical Specifications 12-13
5. Safety 14
5.1. Product Safety Instructions 14
5.2. Battery Safety Precaution 15
6. Certification 16
6.1. CE Declaration 16
6.2. RF Exposure Information (SAR) 17
7. Warnings and Notes 18
7.1. General Rules 18
7.2. Maintenance and Cleaning 18
8. Guarantee 19
8.2. Guarantee Provisions 19-20
8.1. Guarantee Information 21
1.1.Product Description
Arvento-Treyki device is a mini-tracking and monitoring
system with a compact size and lightweight design. It can be
carried in your bag or in your pocket, or attached to yourself
with a wrist strap.
Treyki locates its position with the signals received from GPS
satellites and sends location info to the Control and
Communication Center via GSM/GPRS/SMS. Location and
address of the device are displayed on digital maps through
the Internet and can be monitored on a mobile phone or PC.
Voice calls can be made using Treyki. Treyki users can answer
an incoming call or place outbound calls to pre-defined
numbers. In case of an emergency, users can request
assistance by pressing the S.O.S. button.
INTRODUCTION
INTRODUCTION & USER GUIDE
1.2.Main Features
»GPS personal locator
»GSM/SMS/GPRS communication
»Omni-directional high sensitive GPS antenna which can
receive GPS signal from all direction
»Operates all over the world, provided that the region is
inside GSM coverage. Supports quad band GSM
850/900/1800/1900 MHz and GPRS Class 10
»Real-time tracking and control devices over the web
»Position information logging
»Periodical programming according to time, geographic
region, distance and angle
»Alarms & event notifications:
» S.O.S. (Emergency)
» Low Battery Alarm
» Geo-fence Alarm
» Over Speed Alarm
» Motion/Idle State Detection
»LED Indicators to display GPS, GSM and battery status
»Built-in speaker and microphone
»Make/Receive voice calls
»Two programmable buttons
»USB charging
»60hours stand-by time
»36 hours operation time (position fix and reporting at 15
minutes interval) (Operation time may change according to
the position fix and reporting interval)
»Firmware over the air (FOTA)
03
1.3.Package Content
INTRODUCTION
INTRODUCTION & USER GUIDE
Treyki
220 VAC Power Adaptor Li-Ion Battery
2.1.Charging the Battery
USB input is used for charging the device via PC or power
adaptor.
Charging with 220 VAC Power Adaptor:
1. Connect Treyki device to the supplied AC power adaptor
via USB
2. Plug-in the AC adaptor. Full charge may take 4-6 hours
3. The device power OFF state when the charging begins
4. During the charging process, the Battery LED color light
turns to orange
5. When the device battery is full charged, Battery LED color
turns to green
Only the 220 VAC power adaptor supplied should be used.
Using other type of adaptors may damage your Treyki device.
Charging with USB cable (optional), via connecting to PC:
1. Connect Treyki device to PC with USB cable
2. Connect the cable to a PC or Notebook USB input, full
charge may take 4-6 hours
3. The device power OFF state when the charging begins
4. During the charging process, the Battery LED color light
turns to orange
5. When the device battery is fully charged, Battery LED color
turns to green
Please note that, it is not possible to turn on the device
during the charging process .
GETTING STARTED
05
»Open the SIM card holder as shown in the picture above
»Insert the SIM card into the holder and close the cartridge
»Place the battery in Treyki, and close the battery cover.
Please, ensure that the SIM PIN is unlocked before inserted into the
device. (SIM PIN can be disabled through an ordinary mobile phone).
2.2.Install SIM Card
GETTING STARTED
INTRODUCTION & USER GUIDE
Battery
SIM Card Holder
1
2
4
3
»Remove the belt apparatus
»Remove the battery cover »Remove the battery
1Battery LED
2GSM LED
(Turn On / Accept Call)
3GPS LED
4Programmable Button #1
5Programmable Button #2
6S.O.S. Button
7 NO Button
(Turn Off / Reject or End Call)
8YES Button
9Speaker
10 Mini USB Connector
11 Battery Cover
12 Microphone
13 Belt Apparatus
2.3.Appearance
07
10
9
12
8 7
6
5
4
3
2
1
11 13
2.4.Button Description
YES
»When the device is turned off; if you keep pressing the
“YES” button for 3 seconds, all LEDs blink for 3 times and
the device turns on
»When there is an incoming call, you may press this button
to answer the call
NO
»When the device is turned on; if you keep pressing the “NO”
button for 3 seconds, all LEDs blink for 3 times and the
device turns off
»When there is an incoming call, you may press this button
to reject the call
»When there is an active call, you may press this button to
end the call
S.O.S.
»Emergency button
1
»Programmable Button #1
The user may program this button using WEB interface
2
»Programmable Button #2
The user may program this button using WEB interface
GETTING STARTED
INTRODUCTION & USER GUIDE
Table des matières
