ArtFox SparkX Manuel utilisateur

Professional LED PANELS, STAGE LIGHTING

Manufacturer.

Tel:

+1-(323)287-5559 +1-(323)287-5858

Ins：

artfoxpro

Email:

[email protected]

Facebook:

https://www.facebook.com/artfox.pro

LA Address:

733 9th Ave, City of Industry, CA 91745,

United States

TX Adress:

3125 N Great Southwest Parkway Suite 200

Grand Prairie TX 75050

SparkX

(Cool Spark Machine)

Cool burn, no heat

13ft height maxium indoor (outdoor 18ft)

Local Stocks

5.Warranty Instructions

◆Warranty period：one year(the date of purchase)

◆IF the buyers do not user the same supplier’s powder,the

machine warranty period will b e 3 month. The buyer will pay

for the expenses if there are any componentschanges.

◆In such In the following cases, the product will notbe

guaranteed:

A: the product has been incorrectly operated and used

inadvertently, for example, over load, over pressure, and

firing;

B: the product was broken because of careless handling;

C: due to poor use of environmental factors and sound quality

problems, such as: humidity, voltage instability, etc.;

D: products have been modified by non factory personnel.

◆products comply with the warranty provisions, the factory

will not charge maintenance fees and accessories costs, for

more than the warranty period of the product, only the

corresponding parts, finished goods costs.

◆the contents of this warranty card, the company has the

right to interpret, if the user is unknown, please contact the

local distributors.

◆not covered by the warranty include: packing box,

packaging, product shell and hanger, remote control

transmitter battery.

1.Introduction:

Thank you for choosing the spark machine

We recommend that you carefully read these operating

instructions before commissioning the unit. Please follow the

instructions in this manual. This is the only way to ensure safe

operation, proper use and long service life.

Feature:

◆Environmental protection,safety:no gunpowder and noirritant

◆Support wireless control, LCD and DMX, operate is more

easy and convenient.

Maintenance：

◆Please clean the machine regularly. It will reduce the

replacement and repair cost of spare parts.

◆Do not use for a long time, to clean the machine and make

extra powder out.

Product description：

1. Spark nozzle 2. Powder entrance 3.handle

4.fuse 5.on/off switch 6. USB

7. DMX-512 8.Power out 9. power in

10. wire control plug 11. card scan zone

12. Display board

4.1 RFID card

◆Why we have to use safety card before use ?

To avoid damage to the machine caused by powders

not suitable for the machine.PLEASE USE OUR

POWDER ONLY!

To avoid the accident that may cause by unauthorized person or

children by mistake.

Please keep the card for the right person only.

◆Where you can find the card and How to use it？

The safety card is packaged together with our powders ,Each bag of

powder should have one card .

Tap the Card to the Induction zone to activate the device. Each card

enables the unit to work 20 minutes(that’s almost the using time for

one bag powder ). In the meantime, the card will be invalid after being

read one time.

◆How to check the remaining time？

Press “Menu” buttons till the page “Time” to check the remaining time

(minutes ) of using. Tap another new card to re-activate the unit when

the time is over.

Safety instructions

◆Keep away from humidity, water and dust!

Avoid placing the device in a location with high

humidity or excessive dust.

◆Place the device on a firm ground!

To avoid vibrations always place the device on a firm ground.

◆Do not use chemicals for cleaning!

Use a clean and dry cleaning rag to remove dust. Metal parts can be

cleaned with a damped cleaning rag. Before cleaning always unplug the

device from the power supply.

◆If the device is not working properly!

If problems occur unplug the device from the power supply. The user

should not try to service the device independently. All repairs and

service must be performed by a qualified technician.

◆Eye Protection

The eye protection warning icon is Shown to indicate that you must be

protect your eyes when close to the machine during machine operation.

◆The safety distance to the audience must be 2meter

Never aim the nozzle on people and keep a distance from 1 meter to the

nozzle.Don't spray on the food.

◆ATTENTION!

Damages caused by the disregard of this user manual are not subject to

warranty. The dealer will not accept liability for any consequent secondary

failures. Only skilled workers are allowed to carry out the electrical

connections. All electrical and mechanical connections have to be carried

out according to the European safety standards.

The powder should not be exposed to the air. If a bag of powder is not

used up, it should be kept in a sealed condition and not exposed to open

fire.

NOTES:machine must be vertical if has powder in the tank.Must

take out all powder when machine shipped.

Technical data

Wireless RF Controllers-------- W-3 Receiver/Dip

Switch +W-8 Usage Instructions：

◆When machine ready to spark out, the ready led will glow .There are 3

Channels(Dip 1-3) can be selected for group-1,group-2,group-3

- spark

- close or stop

-lasts 10 seconds.

5 - lasts 20 seconds.

7 - lasts 30 seconds.

4 - group 1 spark (Receiver = 1)

6 - group 2 spark (Receiver =2)

8 - group 3 spark (Receiver =3)

Wired Remote X-2 controller:

◆When the heating process is finished, the green light lights up and indicates

that the button on the remote control can be pressed. If heating is not

complete, the green light does not light up then the remote control cannot be

operated.

Specification ◆

Operation

Before using：

◆Never stand directly below the device when it isbeing

mounted, removed or serviced.Have a qualifiedtechnician

check the device annually and additionally before placing into service if

stored for an extended period of time.

◆Install the device in a secure location that is inaccessible to

unauthorized persons.This machine can only be used byadults.

◆Make sure there is no flammable material within a 10ft radius of the

device.There can be no objects blocking the use of themachine.

◆Be sure that the local power outlet match that or the required voltage

for your machine.

◆Can not join any flammable liquid, such as oil andgas.

◆Be sure the lid is well covered before use the machine,or the spark will splash

out.

Usage method

◆Place the unit on a flat,dry surface. The machine can be inverted, but

can not be sidelong, please pay attention to keep upright. Otherwise the

spark will not be vertical and probably make the machinedamaged.

◆fill the powder reservoir with our powder only then tighten the cap.

◆Scan the safety card before use (for more details about powder and Safety

card please check 4.1)

◆The device starts to heat up. This process needs 5 minutes, meanwhile

the display shows “UP”.

◆The heating process is finished. The display shows “READ“

1. Menu button ：press enter the menu and setting

data，more or less can be adjusted

2. Addr can setting DMX512 addr：min 1，max

512；

3. Fan：min is 10%，max is 100%，10% for 1 step

4.Time: show the machine left time，unit is second

Rated voltage

AC220V/50Hz/AC120V/60Hz

Rated power

500 W

fuse

10 A 5 A

Pre-heating time

<8 min

Spark max height

1-4M

Spark height change

support

Wireless controller

W-8

Display screen

Digital display board

DMX

support

DMX channel

DMX range

1-512

Net weight

6.6 Kg

Gross weight

7.5 Kg

Machine size

190*190*260 mm

Carton size

260*260*310 mm

Table des matières

Autres manuels ArtFox Matériel de DJ

ArtFox

ArtFox Matrix Hybrid CMY Manuel utilisateur

ArtFox

ArtFox LED Spot 300W Manuel utilisateur

ArtFox

ArtFox Pixel Beam K7 Manuel utilisateur

ArtFox

ArtFox KingWash 7QX Manuel utilisateur

ArtFox

ArtFox MONSTER SPOT Manuel utilisateur

ArtFox

ArtFox SHINE BAR 18Q Manuel utilisateur

ArtFox

ArtFox Beam Wash 19QX Manuel utilisateur

ArtFox

ArtFox Power Shine 14QX Manuel utilisateur

ArtFox

ArtFox Pixel Blinder Bar Manuel utilisateur

ArtFox

ArtFox SKY BEAM 9R Manuel utilisateur

ArtFox

ArtFox Beam 2RX Manuel utilisateur

ArtFox

ArtFox Magic 3D Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur